Log:
Downloads : 0   Arquivo Tamanho: 483 kb   Fabricante : AMX  
Categoria : Iluminação
@name

It uses a 0 to 10 VDC current sinking for use with four-wire ballasts. It is designed for use with the RDA series of enclosures, in an AMX Lighting™ modular digital dimming system. The module’s 120 and 277 VAC ratings are CE, UL, and C-UL approved. Mounting points out(LV) + out (LV) High voltage Low voltage Low-voltage High voltage Caution: Pre-Installation Notes All Class 1 wiring must be connected to proper terminals. All control wiring must be connected to proper terminals. Disc

Downloads : 4   Arquivo Tamanho: 427 kb   Fabricante : AMX  
Categoria : Iluminação
@name

It is designed for use with the RDA series of enclosures, in an AMX Lighting™ modular digital dimming system. The RDM-3FDB module's 120, 240, and 277 VAC ratings are CE, UL, and C-UL approved. Mounting points Positive air gap relay Relay Line in (hot) Switched out Dimmed out Relay Line in (hot) Switched out Dimmed out _ Relay Line in (hot) Switched out Dimmed out Fuse Ballast A Ballast B Ballast C • This module may require extra power from the AXlink connection or an external power

Downloads : 0   Arquivo Tamanho: 309 kb   Fabricante : AMX  
Categoria : Iluminação
@name

It uses a 0 to 10 VDC current sinking for use with four-wire ballasts. It is designed for use with the RDA series of enclosures, in an AMX Lighting™ modular digital dimming system. The module’s 120 and 277 VAC ratings are CE, UL, and C-UL approved. Mounting points High voltage High voltage Low-voltage High voltage Low voltage Low voltage Caution: Pre-Installation Notes All Class 1 wiring must be connected to proper terminals. All control wiring must be connected to proper termina

Downloads : 1   Arquivo Tamanho: 224 kb   Fabricante : AMX  
Categoria : Iluminação
@name

It can dim incandescent lights, cold-cathode, neon and two-wire dimmable ballasts. The module's 120, 240, and 277 VAC ratings are CE, UL, and C-UL approved. Mounting_ points KAI IA "" • AC lighting loads only. • For indoor use only. • This module may require extra power from the AXlink connection or an external power supply connected to the control card. Connecting the RDM-2INC to the AMX Lighting Master Pin 4 (GND) Pin 3 (RLY) Pin 2 (DIM) Pin 1 (+12 V) RDM-2INC four-pin module conne

Downloads : 3   Arquivo Tamanho: 95 kb   Fabricante : AMX  
Categoria : Iluminação
@name

It can dim incandescent lights, cold-cathode, neon transformers and two-wire dimmable ballasts. It is designed for use with the RDA series of enclosures, in a AMX Lighting™ modular digital dimming system. The RDM-INC50 module's 120, 240, and 277 VAC ratings are CE, UL, and C-UL approved. Mounting points Line in (hot) Load out • All electrical ratings are for continuous duty. • AC lighting loads only. • For indoor use only. • This module may require extra power from the AXlink connection o





categorias