It uses a 0 to 10 VDC current sinking for use with four-wire ballasts. It is designed for use with the RDA series of enclosures, in an AMX Lighting™ modular digital dimming system. The module’s 120 and 277 VAC ratings are CE, UL, and C-UL approved. Mounting points out(LV) + out (LV) High voltage Low voltage Low-voltage High voltage Caution: Pre-Installation Notes All Class 1 wiring must be connected to proper terminals. All control wiring must be connected to proper terminals. Disc

It is designed for use with the RDA series of enclosures, in an AMX Lighting™ modular digital dimming system. The RDM-3FDB module's 120, 240, and 277 VAC ratings are CE, UL, and C-UL approved. Mounting points Positive air gap relay Relay Line in (hot) Switched out Dimmed out Relay Line in (hot) Switched out Dimmed out _ Relay Line in (hot) Switched out Dimmed out Fuse Ballast A Ballast B Ballast C • This module may require extra power from the AXlink connection or an external power

It uses a 0 to 10 VDC current sinking for use with four-wire ballasts. It is designed for use with the RDA series of enclosures, in an AMX Lighting™ modular digital dimming system. The module’s 120 and 277 VAC ratings are CE, UL, and C-UL approved. Mounting points High voltage High voltage Low-voltage High voltage Low voltage Low voltage Caution: Pre-Installation Notes All Class 1 wiring must be connected to proper terminals. All control wiring must be connected to proper termina

It can dim incandescent lights, cold-cathode, neon and two-wire dimmable ballasts. The module's 120, 240, and 277 VAC ratings are CE, UL, and C-UL approved. Mounting_ points KAI IA "" • AC lighting loads only. • For indoor use only. • This module may require extra power from the AXlink connection or an external power supply connected to the control card. Connecting the RDM-2INC to the AMX Lighting Master Pin 4 (GND) Pin 3 (RLY) Pin 2 (DIM) Pin 1 (+12 V) RDM-2INC four-pin module conne

It can dim incandescent lights, cold-cathode, neon transformers and two-wire dimmable ballasts. It is designed for use with the RDA series of enclosures, in a AMX Lighting™ modular digital dimming system. The RDM-INC50 module's 120, 240, and 277 VAC ratings are CE, UL, and C-UL approved. Mounting points Line in (hot) Load out • All electrical ratings are for continuous duty. • AC lighting loads only. • For indoor use only. • This module may require extra power from the AXlink connection o