Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
It does not represent a commitment on the part of the manufacturer. Under no circumstances will the manufacturer be liable for any direct, indirect, special, incidental, or consequen-tial damages arising from the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. About this installation guide This manual provides general information and installation instructions about the product. This Quick Installation is intended for experienced users and integrators with hardware knowledge of personal computers. If you are not sure about any description in this Quick Installation, please consult your vendor before further handling. P0715 Quick Installation Warning Panel PC and their components contain very delicate Integrated Circuits (IC). To protect the Panel PC and its components against damage from static electricity, you should always follow the following precautions when handling it : 1. Disconnect your Panel PC from the power source when you want to work on the inside 2. Hold the board by the edges and try not to touch the IC chips, leads or circuitry 3. Use a grounded wrist strap when handling computer components. 4. Place components on a grounded antistatic pad or on the bag that came with the Single Board Computer, whenever components are separated from the system 5. It possibly needs BIOS support in the case of using special backplane, otherwise, it might be not able to function completely. 6. Please make sure the power connector is tightly plugged into the power socket before power on. P0715 Quick Installation Getting Started Getting Started This section will help you have your P0715 up and running smoothly. P0715 PACKING LIST 9 x Screws 1 x Arm Holder Bracket 2 x Wall Mount Bracket 1 x Adaptor 2 x Power Cord (American & French Cordset) 1 x Driver CD Before up and running, please make sure the package contains all of above accessories. If any of the above items is damaged or missing, contact your vendor immediately. P0715 Quick Installation Model Name Storage Power Supply Mechanical & Environmental System I/O LCD Display CPU Intel Low Voltage Celeron 400~733MHz CPU FSB100/133MHz Cache 2nd Level 256K Memory 1 x 144Pin SO-DIMM up to 512MB SDRAM VRAM SMI722 G8 Lynx 3D+ engine 8MB Video RAM on chip Chipset Intel 815E + Intel CH2 ATA / IDE Ultra DMA 33, support 2 IDE device Audio Realtek ALC202A AC97 Codec, support Line-out Watchdog Timer 127-level Reset System Fan 1 x 4cm x 4cm / 8 CFM Serial Port 2 x RS-232 ports (COM1/2) USB Port 2 x USB 1.1 compliant KB / MS 1 x PS2 K/B and 1 x Mouse Speaker 1 x speak out LAN RJ45 Size / Type 7" TFT Color LCD Max. Resolution 800 x 480, SVGA Pixel Pitch 0.3075mm x 0.3075mm Touch Screen 7" 4Wire Resistive (USB Interface) Viewing Angle 160° (V), 160° (H) Luminance (cd/m2) 300 Back Light MTBF 50,000 hours HDD / Type 1 x built-in 2.5" vibration Resistant HDD bay Flash Disk 1 x Type II Compact Flash Disk Socket (Internal) Output rating 63W Input voltage DC 12V Input Operating Temp. 0°C ~ 50°C Storage Humidity 5% ~ 95%, non condensing Vibration 17~500 Hz, 1G PTP Shock 10G/peak (11m sec) Construction Heavy-duty steel & Aluminum (Front bezel) Weight 1.9kg (4.18 lb) Dimension (L x H x D) 227 x 158 x 76mm Specification Panel PC P0715 P0715 Quick Installation 6 P0715 Quick Installation Mounting Hook Mounting Arm Mounting Dimension Dimension Unit: mm P0715 Quick Installation OSD of Front Panel OSD of Front Panel P0715 Quick Installation Location of I/O Ports Location of I/O Ports Before starting to install software on your new Panel PC please spend some time to find out the exact location of connectors and HDD (if pre-installed). The front panel does not contain any indicators, switches, connectors or drive access. All these are to be found on the left and right side and on the rear of the system. Default I/O P0715 Quick Installation Connecting Peripherals Connecting Peripherals The user can use the I/O interfaces located at the backside of the chassis to connect external peripheral devices, such as a mouse, a keyboard, a monitor, serial devices or parallel printer etc. Before connection, make sure that the computer and the peripheral devices are turned off. Connecting an external CRT P0715 has a 15-pin analog RGB interface connector located at the rear side of the chassis. As to resolution, P0715 otputs 800 x 480 instead of 800 x 600, it won't display completely at first when you connect the monitor. External Serial Ports (COM1/2) The P0715 logic board supports four onboard serial ports, all COM ports supports RS-232. The external COM1, COM2 are all D-SUB 9-pin connectors. To connect any serial device, follow the following instructions: 1. Turn off the Panel PC system and the serial device...