Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
To turn ON : Press PLAY/PAUSE button (playback starts) To turn OFF : Press STOP button once for standby mode. Press STOP button again to turn off the power. To Remove the Disc 1. Slide the LOCK switch (5) to its original position. 2. Press the CD LID OPEN button to open the CD compartment lid. 3. Hold the edge and gently press the center pivot as illustrated, then pick up the disc. CAUTION: WAIT FOR THE DISC TO STOP SPINNING BEFORE SLIDING THE OPEN SWITCH AND OPENING THE LID. Notes on CD-R/RW Discs - Because of non-standardized format definition/production of CD-R/RW, playback quality and performance is not guaranteed. - Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions such as PC performance, writing software, media ability, etc. - Do not attach a label or seal to either side of the CD-R/RW. It may cause a malfunction. LCD DISPLAY INFORMATION When the is pressed at initial start up • The display will show “- -“ and then the total number of tracks and total playing time. The disc will start playing and the display will show the first track number and instant playing time. • To review the total number of tracks and total playing time of the disc, press the STOP button once. During PLAY mode • The track number and instant playing time are displayed. The ASP indicator will flash and then alight. During PAUSE mode • When the track playback is paused, the playing time flashes. Battery Low Indicator A flashing battery indicator appears in the display when the batteries need to be changed. VARIOUS PLAY MODES REPEAT Every time the MODE button is pressed, the corresponding mode appears in the display window, in the following sequence: REPEAT 1: When shown on the LCD display, the current track on the disc will be repeated. REPEAT ALL: When shown in the LCD display, all tracks on the disc will be repeated. NORMAL PLAYBACK Play the whole disc. The playback will stop after the last track is finished. INTRO To play the first 10 seconds of each track on the disc. • When in the STOP mode, press the MODE button three times. The icon “ ” will be shown in the left corner. Press the button to start INTRO playback. • During disc playback, press the MODE button three times and then press the skip backward button to start INTRO playback. The flashing icon “ ” will be shown in the left corner. Press MODE button two more times to return to normal playback. PROGRAM This allows the selected tracks on the disc to be played in any desired order. NOTE: Programs can be set in either PLAY or STOP mode. 1. Press the PROG button when the unit is in the PLAY/STOP mode. The track number will appear in the display with the flashing “ ” indicator. 2. Press or to select the desired track. 3. Press the PROG button to enter the track into the memory. 4. Repeat the step 2 and 3 to program up to 24 tracks into the memory. 5. Press to start the programmed play. 6. To stop the program play, press the STOP button once. 7. To check the programmed memory, press or during PGM mode. 8. To erase the program memory, open the lid or turn off the power by pressing the STOP button twice. SHUFFLE This enables all the tracks on a disc to be played in a shuffle (SHUF) or random sequence. For example: If Shuffle mode is selected while playing track 8, the random function will commence once track 8 has ended. 1. During normal playback, press MODE button four times to activate random play. The icon “ ” will be shown in the left hand side of the display. 2. Press MODE button again to return to the NORMAL play mode. SKIP AND SEARCH FUNCTIONS Locating a Particular Track To skip back to the beginning of the current or a previous track Press once or repeatedly. To skip to the beginning of following tracks Press once or repeatedly. Locating a Particular Point in a Track To search back at a high speed Press & hold To search forward at a high speed Press & hold Note: Low level audio will be heard during the search process to assist in locating correct point in the track. DIGITAL ANTI-SHOCK OPERATION This player incorporates the latest digital anti-skip circuitry which prevents interruption during playback if the unit is subjected to shock or vibration. The anti-skip system will automatically be activated when a disc is played and will show the flashing icon “ASP” in the display. The sound will mute for approximately 1 second while the buffer fills when the PLAY button is first pressed. Once full, the buffer will give approximately 60 seconds of protection against interruptions due to shock or vibration. If the player is subjected to continuous shock or vibration for longer than the buffer memory allows, some interruption of sound output will occur. This is normal and to be expected and the sound will resume once the player has stabilized from the shock or disturbance and the buffer refills. NOTE: Anti-skip function provides for continuous sound output when the unit is subjected to shock or vibration. It will not compensate for errors ...
Este manual também é adequado para os modelos :Jogadores - CD-600 (152.64 kb)