Log:
Assessments - 3, GPA: 4.7 ( )

Instruções de Operação Peripheral Electronics, Modelo PGHGM5

Fabricante : Peripheral Electronics
Arquivo Tamanho: 551.89 kb
Arquivo Nome : pghgm5_instructions_050508.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


5. If connecting the HD Radio Tuner (HDRT sold separartely), make the folllowing connections before connecting the PXAMG to the vehichle. Plug the 3 foot HD Radio Cable (8-Pin mini-din to 8-Pin mini-din) cable into the second port (closest to the dipswitches) on the Media Gateway. Connect the other end of this cable into the HD Radio tuner. Connect the factory antenna cable into the antenna connection on the HD Radio tuner (HDRT). 6. Plug in the male connectors on the PGHGM5 harness into the 24 & 12-pin port on the back of the radio. Next, connect the factory 24 & 12-pin harness (if present) into the female connectors on the PGHGM5 harness. Be sure to make a firm connection but do not force it. Plug the Black micro-fit 24-pin connector on the PGHGM5 harness into the PXAMG Media Gateway box. 7. To complete the installation secure the Media Gateway (PXAMG) and HD Radio tuner (HDRT if equipped) into the cavity in the dash behind the radio. Be sure that the cables and interface modules are not near moving parts or sharp metal edges as they may damage the cables. To prevent rattling noises inside the dash, use zip ties, tape, or other fasteners to mount the interfaces securely. 8. With all connections made, reconnect the vehicle’s battery, insert the key into the ignition, and turn the vehicle on. Check for proper operation of the Media Gateway and HD Radio tuner before reinstalling the factory dash panels. 9. Note: The first time you access the Gateway, your radio may display “DEV INIT” while the device is initializing. If this is displayed, please wait one minute then cycle the ignition off and on. Then access SAT mode again to begin normal gateway operation. 6. iPod Operation Entering Mode Select Menu Leave and re-enter the XM source to enter the mode select menu. This can be accomplished by pressing the “BAND” button to switch to FM, AM and then again to switch back to “XM”. Once in the mode select menu, turn the rotary knob until “iPod” is displayed. The gateway will auto select the mode after 4 seconds of inactivity. Next Track Turn the rotary tune knob to the right one notch to advance to the next track. Previous Track Turn the rotary tune knob to the left one notch to move back to the previous track. Fast Forward Press PRESET 2 repeatedly to fast forward the song that is playing. Rewind Press PRESET 1 repeatedly to rewind the song that is playing. Entering “BROWSE Menu / Select Press PRESET 3 to enter the “BROWSE” menu or to make a selection while in the “BROWSE” menu. Menu UP Press PRESET 4 to move up one folder in the “BROWSE” menu. Exit Browse menu After 10 seconds of inactivity the menu will time out and return to normal opperation. 5 Browse by Artist Press Preset 3 to enter the browse menu. ”PL: LIST” will appear on your display. Turn the rotary tune knob until ARTIST is displayed. Press Preset 3 to select browse by Artist. The list of Artists on your iPod will be displayed one at a time in alphabetical order. “AR” will be displayed in front of the artist’s name to indicate that you are searching for an artist. Turn the rotary tune knob to cycle through the artists. When the desired artist is displayed on the radio, Press Preset 3 to select the artist and display the albums by that artist. The Albums from the selected Artist will be displayed one at a time in alphabetical order. “AL” will be displayed in front of the name of the album to indicate you are searching for an album. Turn the rotary tune knob to cycle through the albums. Once the desired album is displayed, Press Preset 3 to select the desired Album. The first song in the album will be displayed. “TR” will be displayed in front of the song title to indicate that a “track” or song title is being displayed. Turn the rotary tune knob or cycle through the songs in the selected album. Songs are listed in the order in which they appear in the album, not alphabetically. Once the radio displays the name of the desired song, Press Preset 3 to select and play the desired song. The display will automatically change to show the title of the chosen song. Press the “TEXT” button to toggle between track title and artist name. 6 Browse by Album Press Preset 3 to enter the browse menu. ”PL: LIST” will appear on your display. Turn the rotary tune knob until ALBUM is displayed, Press Preset 3 to select browse by Album. The Albums on your iPod will be displayed one at a time in alphabetical order. “AL” will be displayed in front of the name of the album to indicate you are searching in the album folder. Turn the rotary tune knob to cycle through the albums. Once the desired album is displayed, Press Preset 3 to select the desired Album. The first song in the album will be displayed. “TR” will be displayed in front of the song title to indicate that a “track” or song title is being displayed. Turn the rotary tune knob to cycle through the songs in the selected album. Songs are listed in the order in which they appear in the album, not alphabetically. When the...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias