Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
The currently tuned frequency is indicated on the frequency range scale on the front of the set. . Turn the volume control on top of the set to adjust the required volume. .... Enhancing the reception of radio stations The set is fitted with built-in antennas to receive radio stations in the frequency ranges FM/VHF and AM/Medium Wave. To enhance the reception of radio stations, turn the set in different directions until good reception of the tuned station is achieved. .. Audio CDs .... Playing audio CDs Proceed in the following manner to play audio CDs … . Set“CD” with the function selector on the left-hand side of the set. The LCD display at the front of the set will first display “- -“, followed by “00”. . Open the CD compartment on the top of the set by raising the cover with a finger in the small recess bearing the inscription “Lift up to open”. Prior to first time use: Remove the cardboard transport protection from the CD compartment. . Place a CD – with the label side up – in the CD compartment. . Press down the cover of the CD compartment until it becomes audibly engaged, After a few seconds the total number of tracks on the loaded CD will be indicated on the LCD display. . Press the “Play/Pause”button once. The first track on the CD will then be played. GB Operating Instructions| .. Manual_KH2241_EN 11 16.09.2003, 14:56 Uhr GB The display will indicate … • The track number of the music title that is currently being played, for instance “1” for the first track on the CD, and • “PLAY” to the left of the current track number. . Turn the volume control on the top of the set to adjust the desired volume. ..... CD playback pause (PAUSE mode) To stop playback of the audio CD press the “Play/Pause” button once. “PLAY”, displayed to the left of the current track number, will start to flash. Press the “Play/Pause” button once again to resume playback. The current piece of music will now continue from the point it was previously stopped. “PLAY”, displayed to the left of the current track number, will cease to flash. ..... CD playback stop (STOP mode) Press the “STOP” button to discontinue music playback. ... Skip functions The skip functions are used for the following purposes … • Press the respective button to select a track in the sequence on the audio CD by skipping forward (“Next”) or back (“Back”) to the beginning of each track and • Select any section within a track during playback in rapid search forward or reverse. ..... Jump Forward/Back to beginning of the track Proceed in the following manner to jump within a track on an audio CD forward/back to the beginning of a track … a) … When no CD is being played (STOP mode): . Continue pressing the “Next” button (jump forward to the beginning of the next track) or “Back”(jump back to the beginning of the last track) until the display indicates the number of the desired track. . Press the “Play/Pause”button once to start play back of the selected track. b) … During playback of the current CD: .. | Operating Instructions Manual_KH2241_EN 12 16.09.2003, 14:56 Uhr . Continue pressing the “Next”/”Back” button until the display indicates the number of the desired track. . Playback of the selected track commences instantly without having to press the “Play/Pause” button. c) … With stopped CD playback (PAUSE mode): . Continue pressing the “Next”/”Back” button until the display indicates the number of the desired track. . The selected track is now automatically set in PAUSE mode. To play simply press the “Play/Pause” button once. ..... Rapid search Forward/Reverse Proceed in the following manner to select certain sections within a track by rapid search Forward/Reverse … . Keep the “Next” button (rapid search forward) of the “Back” button (rapid search reverse) depressed during playback of the desired track. The current music title (track) can now be heard at high speed while the “Next”button forward or the “Back”button reverse is kept depressed. . Release the“Next”/”Back”button as soon as the desired section within the track is reached. Playback from the selected point of the track is now automatically continued at normal speed. .... Repeat functions The following can be set with the repeat functions … • Repeat a single track of an audio CD • Repeat the entire audio CD ...... Repeat track To repeat playback of a single track press the“Repeat 1/All” button once during playback of the desired title. “RPT”flashing on the LCD display to the left of the current track number indicates that track repeat has been switched on. The selected track continues to be repeated until track repeat is switched off. To turn off track repeat press the “Repeat 1/All”button twice. “RPT” flashing on the LCD display to the left of the current track number is turned off. GB Operating Instructions| .. Manual_KH2241_EN 13 16.09.2003, 14:56 Uhr ...... Repeat CD To repeat all tracks on the audio CD press the“Repeat 1/All” button twice during playback of a music title. Activation of CD repeat is i...