Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
1 to open the tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. With the side you want to play facing upward 12 STOP/EJECT 2 PLAY Press (. Display The player turns on (direct power-on) and starts playing. 8GB Basic Operations Tip Next time you want to listen to a tape, just press (. The player turns on automatically and starts playing the tape. Use these buttons for additional operations 0 ) p6 P VOLUME +, – OPERATE (or POWER) To Press adjust the volume VOLUME +, – (VOL +, – on the remote, CFD-S38/ S38L/S55 only) stop playback p6 fast-forward or rewind the tape ) or 0 pause playback P Press the button again to resume play after pause. eject the cassette p6 turn on/off the player OPERATE (or POWER, see page 2) Basic Operations 9GB Basic Operations Recording on a tape 31 Connect the supplied AC power cord (see page 25). 1 to open the tape compartment and insert a blank tape. Use TYPE I (normal) tape only. STOP/EJECT With the side you want to record on facing upward 2 Select the program source you want to record. Display CD To record from the CD player, insert a CD (see page 4) and press p on the CD section. PRESET RADIO BAND To record from the radio, tune in the station you want (see page 6). 10GB Basic Operations REC Press r to start recording (( is depressed automatically). Use these buttons for additional operations p6 P OPERATE (or POWER) FUNCTION PLAY MODE MONO/ST ISS To Press stop recording p6 pause recording P Press the button again to resume recording. turn on/off the player OPERATE (or POWER, see page 2) Basic Operations Tips • Adjusting the volume or the audio emphasis (see page 27) will not affect the recording level. • CFD-S28L/S38L only: If the MW/LW program makes a whistling sound after you've pressed r in step 3, press PLAY MODE• MONO/ST ISS (Interference Suppress switch) repeatedly until the noise is at a minimum. • For the best results, use the AC power as a power source. • To erase a recording, proceed as follows: 1 Insert the tape whose recording you want to erase. 2 Press FUNCTION to select “TAPE”. 3 Press r. 11GB Basic Operations The CD Player Using the display You can check information about the CD using the display. DISPLAY ENT MEMORY Checking the total track number and playing time Press DISPLAY ENT•MEMORY in stop mode. If the CD has more than 12 tracks, “OVER 12” appears in the display. Total playing time Total track number Music calendar Checking the remaining time Press DISPLAY•ENT MEMORY while playing a CD. The track numbers in the music calendar disappear after they are played. To display Press DISPLAY ENT• MEMORY the current track number and the remaining time on the current track* once the number of tracks left and remaining time on the CD twice the current track number and playing time three times * For a track whose number is more than 20, the remaining time appears as “- -:- -”. 12GB The CD Player Locating a specific point in a track You can quickly find a specific point in a track while playing a CD. You can also locate any track using the number buttons on the remote =, + (CFD-S38/S38L/S55 only). The CD Player Note CFD-S38/S38L/S55 only: You cannot locate a specific track if “SHUF” or “PGM” is lit in the display. Turn off the indication by pressing p. Tip CFD-S38/S38L/S55 only: When you locate a track numbered over 10, press >10 first, then the corresponding number buttons. Example: To play track number 23, press >10 first, then 2 and 3. To locate Press a point while listening to + (forward) or = the sound (backward) while playing and hold down until you find the point a point while observing + (forward) or = the display (backward) in pause and hold down until you find the point a specific track directly the number button of the (CFD-S38/S38L/S55 only) track on the remote 13GB The CD Player Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes PLAY MODE MONO/ST ISS ^ p =, + (see page 16). On the remote (CFD-S38/S38L/S55 only) 1 Press p. 2 Press MODE until the repeat mode you want appears in the display. 3 Do either of the following to start repeat play: •When you’ve selected “REP 1”, select the track by pressing the number button. •When you’ve selected “REP ALL” or “SHUF REP”, press (. •When you’ve selected “PGM REP”, program tracks (see step 3 on page 16), then press (. 1 Press p. “Cd” appears in the display. 2 Proceed as follows. To repeat Do this a single track 1 Press PLAY MODE• MONO/ST ISS until “REP 1” appears. 2 Press = or + to select the track that you want to repeat. 3 Press ^. all the tracks 1 Press PLAY MODE• MONO/ST ISS until “REP ALL” appears. 2 Press ^. tracks in random order 1 Press PLAY MODE• MONO/ST ISS until “SHUF REP” appears. 2 Press ^. programmed tracks 1 Press PLAY MODE• MONO/ST ISS until “PGM REP” appears. 2 Program tracks (see step 3 on page 16). 3 Press ^. To cancel Repeat Play Press PLAY MODE•MONO/ST ISS until “REP” disappears from the display...
Este manual também é adequado para os modelos :Jogadores - CFD-S28L (578.61 kb)
Jogadores - CFD-S55 (578.61 kb)