Assessments - 5, GPA: 4 ( )

Fabricante : Philips Arquivo Tamanho: 814.3 kb Arquivo Nome : Língua de Ensino:

• Playback will stop if you open the CD lid. • While the CD is read, 1 -:- flashes in the display. Volume and bass Volume adjustment • Adjust the volume by using VOL E. Bass adjustment • Press DBB to switch the bass enhancement on or off y is shown if the bass enhancement is activated. Remote control (supplied or optionally available) Use the AY 3767 or AY 3768 cord remote control.The buttons on the remote control have the same functions as the corresponding buttons on the set. 1 Press 9 twice to switch off the set. 2 Firmly connect the remote control to LINE OUT/p on the set. 3 Adjust the volume VOL Eon the CD player and remote control. PROGRAM MODE DBB TRACK MODE CD player and CD handling Playing a CD TURES FEA Selecting a track and searching Selecting a track during playback • Briefly press . or § once or several times to skip to the current, previous or next track. yPlayback continues with the selected track, and the track’s number is displayed. Selecting a track when playback is stopped 1 Briefly press . or § once or several times to select the desired track. The track number is displayed. PROGRAM MODE DBB TRACK MODE 2 Press 2; to start CD play. yPlayback starts with the selected track. Searching for a passage during playback 1 Keep . or § pressed to find a particular passage in a backward or forward direction. ySearching starts while playback continues at low volume. After 2 seconds the search speeds up. 2 Release the button when you reach the desired passage. yPlayback continues from this position. Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible. –Inshuffle, shuffle repeat all or repeat mode (see MODEchapter), or while playing a program, searching is only possible within the particular track. Programming track numbers You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program. 1 While playback is stopped, select a track with . or §. 2 Press PROGRAM to store the track. yprogram lights up; the track number programmed and P with the total number of stored tracks are displayed. 3 Select and store all desired tracks in this way. 4 Press 2; to start playback of your selected tracks. yprogram is shown and playback starts. • You can review the program by pressing PROGRAM for more than 2 seconds. yThe display shows all the stored tracks in sequence. program program PROGRAM MODE DBB TRACK MODE Notes: – If you press PROGRAM and there is no track selected,SELis displayed. –If you try to store more than 30 tracks,FULLis displayed. Clearing the program • While playback is stopped, press 9 to clear program. yCLr is displayed once, program goes off, and the program is cleared. program Note: The program will also be cleared if the power supply is interrupted, or if the CD-player lid is opened, or if the set switches off automatically. FEATURES Selecting different playing possibilities.MODE It is possible to play tracks in random order, to repeat a single track or the entire CD, and to play the first few seconds of each track. 1 Press MODE during playback as often as required in order to activate one of the following ‘modes’. The active mode is shown in the display. yshuffle : All tracks of the CD are played in random order until all of them have been played once. yshuffle repeat all : All tracks of the CD are played repeatedly in random order. yrepeat : The current track is played repeatedly. yrepeat all : The entire C...

Baixe o seu

Para fazer o download, introduza 2 dígitos :