Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
•To deactivate RESUME, switch the slider to OFF. HOLD- locking all buttons You can lock the buttons of the set. When a key is pressed, no action will be executed. With HOLD activated, you can avoid accidental activation of other functions. • Switch the HOLD.RESUME.OFF slider to HOLD to activate HOLD . hoLd is displayed briefly. . All buttons are locked and no action will be executed when you press any button on the set. If the set is switched off, hoLd appears when 9 is pressed. • To deactivate HOLD, switch the slider to OFF . All the buttons are unlocked. ESP, POWER SAVE MODE With a conventional portable CD player, you might have experienced that music stopped (e.g. when you were jogging). The Electronic Skip Protection prevents playback interruption caused by light vibrations and shocks. Continuous playback is ensured. However, ESP does not prevent playback interruptions during vigorous running. It also does not protect the unit against any damage caused by dropping! The power save mode helps to extend battery service life for longer playback. • Press once . . appears when shock protection is activated • To deactivate the shock protection and enter into the power save mode, press again. . icon will flash. . displays MAGIC ESP! Average playing time when ESP skip protection activated : Seconds track type 100 MP3 (128kbps) 200 WMA (64kbps) 45 Audio CD Helpful Hints: – For a MP3/WMA CD, is by default always activated. TROUBLESHOOTING WARNING: Under no circumstances should you try to repair the set yourself as this will invalidate the warranty. If a fault occurs, first check the points listed before taking the unit for repair. If you are unable to solve a problem by following these hints, consult your dealer or service center. The CD player has no power, or playback does not start • Check that your batteries are not empty, that they are inserted correctly, that the contact pins are clean. • Your adapter connection may be loose. Connect it securely. The indication no dISc is displayed/CD cannot be read • Check that the CD is clean and correctly inserted (label-side upward). • If your lens have steamed up, wait a few minutes until the lens clear up. • CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder. The indication hoLd is on and/or there is no reaction to controls • If HOLD is activated, then deactivate it. • Electrostatic discharge. Disconnect power or remove batteries for a few seconds. Music files do not play • Check that the file names of MP3/WMA files end with .mp3. or .wma. Some directories missing on MP3/WMA CDs • Check that the total number of files and albums on your MP3/WMA CDs does not exceed 999 files and 99 albums. • Only albums with MP3/WMA files are shown. CAUTION Use of controls or adjustments or performance of procedures other than herein may result in unsafe operation. 9 1 2 0 3 4 8 7 6 5 1 PLAYING A CD To stop playback • Press 9. . Audio CD: The display shows the total number of tracks and total playing time MP3/WMA CD: The total numbers of tracks and albums are displayed respectively. • Press 9 again to switch off the player. • To remove the CD, hold it by its edge and press the hub gently while lifting the CD. Helpful Hints: – If there is no more activity, the set will automatically switch off after 25 seconds. VOLUME AND SOUND Volume adjustment • Adjust the volume by using . VOL + (0-30). Bass adjustment • Press DBB to switch the bass enhancement on or off yDBB appears if the bass enhancement is activated. PLAYING A CD This CD player can play all kinds of Audio Discs (including CD-Recordables and CD-Rewritables) and MP3/WMA CDs. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CDs. Important: • CDs encoded with copyright protection technologies by some record companies maybe unplayable by this product. • For DRM protected WMA files, use Windows Media Player 10 (or later) for CD burning/conversion. Visit microsoft.com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management). 1 Push the OPEN 2 slider to open the player. 2 Insert an audio CD or a MP3/WMA CD, printed side up, by pressing the CD onto the hub. 3 Close the player by pressing the lid down. 4 Press 9 to switch the player on and start playback. . is displayed as the CD player scans the contents of a disc. . Playback starts automatically. Audio CD: the display shows current track number and elapsed playing time. MP3/WMA CD: The display shows current album/track number and elapsed playing time. To pause playback • Press 2;. . The elapsed playing time and 2; flashes. • Press 2; again to continue playback. 1 OPEN 3 CD 4 5 HOLD . OFF 6 STO P 7 VOL !!! QUICK START MISE EN SERVICE RAPIDE Printed in China wk7123 CLASS 1 LASER PRODUCT Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners 2007 © Koninklijke Philips Electronics N.V. All rights reserved. ALIMEN...