Assessments - , GPA:
(
)
)
Fabricante : Philips
Arquivo Tamanho: 883.09 kb
Arquivo Nome :
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
0 OPEN MODE 0 OPEN English Storing radio stations You can store up to 30 radio stations. 1 Tune to a desired radio station and press PROGRAM. 2 Press or ¤ if necessary repeatedly to select the number that should be assigned to this radio station. 3 Press PROGRAM while PRESET is blinking to confirm the storing. y PRESET, the waveband, the frequency and the preset number of the stored station are displayed. 4 Store all desired stations this way. ESP PROGRAM RADIO ·BAND ·MODE Note: Already stored stations can be recognized by the indicatorPRESET and the preset number. Tuning to a stored radio station 1 Select the waveband. 2 Press or ¤ if necessary repeatedly to select the preset number of the desired radio station. y Radio play starts. PRESET, the waveband, the frequency and the preset number of the stored station are displayed. 21 CLOCK Time setting English Your player has a built-in clock. play is not conditional upon 1 Keep SET· pressed for approximately y The clock digits OO:OOflash. 2 Keep 3 or 4 pressed, then briefly press 3 or 4 again repeatedly within 5 seconds to set the current time. y The current time is displayed. 3 Press SET· three times or do not press any key for 5 seconds. y The current time is set and the time display goes off. • To switch to the clock display during CD or tuner play, press CLOCK. y The current time is displayed for 5 seconds. Notes: – When the player is supplied by batteries do not remove the batteries during radio play, otherwise time settings will be lost and will have to be readjusted. – If the power supply is interrupted for longer than PROGRAM CLOCK RADIO·BAND SET· 1 minute, all time settings will be lost and will have to be readjusted. 22 ALARM Alarm time setting Provided the current time be used as an alarm clock. 1 Keep SET· pressed for approximately then briefly press SET· again. y AL is displayed and the alarm clock digits 00:00 flash. 2 Press 3 or 4 repeatedly within 5 seconds to set the alarm time. y is shown and the alarm time is displayed. 3 Press SET· twice or do not press any key for 5 seconds. y The alarm time is set and the alarm display goes off. • To switch to the alarm clock display during CD or tuner play, press CLOCK twice. y is shown and the alarm time is displayed for 5 seconds. English 23 ALARM Alarm activation/ English At the set alarm time either the beeper will come on for 3 minutes or an entire CD will 1 Keep SET· pressed for approximately briefly press SET· twice. y Either ALbEEP, ALCd or ALtun is displayed. 2 Press 3 or 4 if necessary repeatedly within 5 seconds to select the desired alarm signal until the display shows either: ALbEEP: the beeper will be the alarm signal, ALCd: the CD will be the alarm signal, or ALtun: the tuner will be the alarm signal. y At the set time starts flashing and the selected alarm signal will come on. • You can deactivate the beeper for 24 hours by pressing any key on the player. • If you deactivate the alarm function by switching CD or tuner play off with 9, CD or tuner play will restart after 24 hours. • To switch the alarm function on or off, keep ESP pressed for approximately 2 seconds. y is shown if the alarm function is on. Notes: – If there is no CD inserted or no radio station tuned, the beeper will be taken as the alarm signal instead. – The alarm can only be heard if you disconnect the headphones, and either connect speakers to the player, or select the beeper as the alarm signal. 24 IN-CAR CONNECTION 25 Only use the AY 3545 car voltage converter (4.5 V, DC, positive pole to the centre pin) and the AY 3501 car cassette adapter. Any other product may damage the set. 1 Put the CD player on a horizontal, vibration-free and stable surface. Make sure it is in a safe place, where the player is neither a danger nor obstacle to the driver and passengers. 2 Connect the DC plug of the voltage converter to the 4.5V DC socket of the CD player (only for a 12 V car battery, negative grounding). 3 Insert the voltage converter into the cigarette lighter socket. If necessary, clean the cigarette lighter socket to obtain a good electrical contact. 4 Turn down the volume and connect the cassette adapter plug to the LINE OUT/p socket of the CD player. 5 Carefully insert the cassette adapter into the car radio’s cassette compartment. 6 Make sure the cord does not hinder your driving. 7 Start the CD player, set VOL Eto position 8 and adjust the sound with the car radio controls. • Always remove the voltage converter from the cigarette lighter socket when the CD player is not in use. Notes: – Avoid excessive heat from the car heating or from direct sunlight (e.g. in a parked car in the summer). – If your car radio has a LINE IN socket, it is better to use it for the car radio connection instead of the cassette adapter. Connect the signal lead to this LINE IN socket and to the LINE OUT/p socket of the CD player. 4,5 V DC SUME•HOL 0 OPEN OFF• RESUME• HOLD LINE OUT/ VOL. ESP PROGRAM CLOCK RADIO·BAND DIGITAL DBB DIGITAL DIGITAL S...