Assessments - 3, GPA: 3
(
)
)
|
Facilidade de uso
If noise is produced, it is recommended that you record in normal stereo or LP2 mode to obtain better sound quality. Recording tracks using the group function (Group Mode Recording) What is the group function (Group Mode)? It is a function that allows you to separate tracks on a disc into different groups for playback, recording and editing. When group mode is OFF. 123456789 Disc Track number When group mode is ON. Disc 123 123412 Group 1 Group 2 Group 3 Track number Track number Track number It is convenient for managing multiple CD albums recorded in MDLP (LP2 stereo/ LP4 stereo) mode onto a single MD. You can create a maximum of 99 groups on a disc. How is group information recorded? When recording in group mode, the group information is written to the disc name recording area automatically. This information consists of text strings that are written as shown in the following example. Disc name recording area Example 1 23 1 Disc name: “Favorites” 2 Group name for tracks 1 to 5: “Rock” 3 Group name for tracks 6 to 9: “Pops” Therefore, the above character string is displayed in its entirety as the disc name if you load an MD recorded in group mode into a system that does not support group mode, or if you try to edit the contents of a disc on this recorder with the group mode turned off. It is possible to change the character string by doing “ Relabeling recordings” procedure in the “ Labeling/relabeling recordings” (page 43). Note that if you rewrite this character string by mistake, you may be unable to use the group function of that MD. Notes • The group function setting is stored even if you eject the MD or turn off the recorder. • In group mode, the recorder treats all tracks without group settings as belonging to the last group on the disc. The last group is indicated in the display window on the recorder as “Group --”. Within a group, the tracks appear in their order on the disc, not their order within the group. . END SEARCH GROUP REC ./> DISPLAY Control x To activate group mode (Group Mode Recording) To record tracks in group mode, you must first turn group mode on before the start of recording. On the recorder 1 Press GROUP for 2 seconds or more. “ ” lights up and group mode turns on. To cancel group mode, press GROUP for 2 seconds or more again. On the remote control 1 Press DISPLAY for 2 seconds or more. 2 Turn the control until “GROUP” flashes in the display, and then press x to enter. 3 Turn the control until “GROUP ON” flashes in the display, and then press x to enter. “G” lights up in the display. To cancel group mode, select “GROUP OFF” in this step. Recording a track into a new group • This function can be operated on the recorder only. • Turn group mode on. 1 Press END SEARCH while the recorder is stopped. 2 Press and slide REC to the right. 3 Play the source sound. To stop recording Press x. The material that was recorded up until x was pressed is entered as a new group. Recording a track into an existing group • This function can be operated on the recorder only. • Turn group mode on. • Insert a disc with group settings. 1 Press GROUP. “ ” flashes in the display and you can select a group directly (Group Skip Mode) (page 36). 2 Within 5 seconds, press . or > repeatedly until the group you want the track to belong to appears. “ ” flashes and after a while it lights up in the display. 3 Press and slide REC to the right. 4 Play the source sound. Newly recorded track is added after the current contents. Notes • Even if “REC-Posi” is set to “From Here”, newly recorded tracks are inserted after the existing tracks in the specified group without recording over the current contents. • Group skip mode turns off automatically in step 2 if nothing is done within 5 seconds. To continue the procedure, do step 1 again. z To add a track that is playing to a group, stop playing the track first, and then do the procedure from step 3. Recording without overwriting existing material If you wish to avoid overwriting the current contents of an MD, do the following procedure. All new material will then be recorded from the end of the current contents. The recorder is factory set to record over existing material MENU ENTER/ ./> 1 While the recorder is stopped, press MENU. 2 press . or > until “OPTION” flashes in the display, and then press ENTER. continued 3 Press . or > repeatedly until “REC-Posi” flashes in the display, and then press ENTER. 4 Press . or > repeatedly until “From End” flashes in the display, and then press ENTER. To start recording from the current point Select “From Here” in step 4. z To temporarily record without recording over the current contents, press END SEARCH before the start of recording. The recording will begin after the last track, even if “REC-Posi” is set to “From Here” (factory setting). The remaining recordable time on the disc will appear in the display when you press END SEARCH. Notes • The setting will remain even after the power is turned off. • If you start recording whi...