Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
• If the AM program makes a whistling sound after you've pressed rin step 3, press MODE to select the position that most decreases the noise. • For the best results, use the AC power as a power source. • To erase a recording, proceed as follows: 1 Press 9and then press p6. Insert the tape whose recording you want to erase into the tape compartment. 2 Press r. Use these buttons for additional operations POWER P p6 To Press Stop recording p6 Pause recording P Press the button again to resume recording. Turn on/off the player POWER 11EN Basic Operations The CD Player Using the display DISPLAY/ENTER You can check information about the CD using the display. Checking the total track numbers and playing time Press DISPLAY/ENTER in stop mode. If the CD has more than 12 tracks, “OVER 12” appears in the display. Total playing time Total track numbers Music calendar Checking the remaining time Press DISPLAY/ENTER while playing a CD. The track numbers in the music calendar disappear after they are played. To display Press DISPLAY/ENTER The current track number and the remaining time on the current track* Once Remaining time on the CD and the number of tracks left Twice The current track number and playing time Three times * For a track whose number is more than 20 the remaining time appears as “– –:– –”. 12EN The CD Player Locating a specific track You can quickly locate any track using the number buttons. You can also find a specific point in a track while playing a CD. Number buttons 0/ ) The CD Note You cannot locate a specific track if “SHUF REP” or “PGM” is lit in the display. Turn off the indication by pressing p. Tip When you locate a track numbered over 10, press >10 first, then the corresponding number buttons. Example: To play track number 23, press >10 first, then 2 and 3. To locate Press a specific track directly number button of the track. a point while listening to the sound )(forward) or 0 (backward) while playing and hold down until you find the point. When you use the buttons on the player, use =/ +. a point while observing the display )(forward) or 0 (backward) in pause and hold down until you find the point. When you use the buttons on the player, use =/ +. 13EN The CD Player Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see pages 15 and 16). Number buttons MODE ( p 1 Press p. “Cd” appears in the display. 2 Press MODE until the repeat mode you want appears in the display. To repeat Select a single track REP 1 all the tracks REP ALL tracks in random order SHUF REP programed tracks PGM REP and then progam tracks (see step 3 on page 15). 3 Do either of the following to start repeat play: • When you’ve selected REP1, select the track by pressing the number button. • When you’ve selected REP ALL, SHUF REP or PGM REP, press (. To cancel Repeat Play Press MODE until “REP” disappears in the display. 14EN The CD Player Creating your own program (Program Play) You can make a program of up to 20 tracks in the order you want them to be The CD played. Tips • You can select the track on the player. Press =/+ then press DISPLAY/ENTER instead of the number buttons. • You can play the same program again, since the program is saved until you open the CD compartment. • You can record your own program. After you’ve created the program, insert a blank tape into the tape compartment and press rto start recording. Number buttons MODE ( p 1 Press p. “Cd” appears in the display. 2 Press MODE until “PGM” appears in the display. 3 Press the number buttons for the tracks you want to program in the order you want. You can program up to 20 tracks. Programed track Playing order 4 Press (to start program play. continued 15EN The CD Player Creating your own program (Program Play) (continued) To cancel Program Play Press MODE until “PGM” disappears in the display. To check the order of tracks before play Press DISPLAY/ENTER on the player. Every time you press the button, the track number appears in the programed order. To change the current program Press ponce if the CD is stopped and twice if the CD is playing. The current program will be erased. Then create a new program following the programing procedure. 16EN The CD Player The Radio Presetting radio stations You can store radio stations into the player's memory. You can preset up to 20 radio stations, 10 for each FM or AM in any order. Number buttons BAND TUNE +/– The Radio Tip To preset radio stations on the player, proceed as follows: 1 Select the band and tune in a station you want. 2 Hold down DISPLAY/ENTER for about 2 seconds. 3 Decide on a preset number for the station (1 to 10) by pressing PRESET +/–. A preset number flashes in the music calendar. 4 Press DISPLAY/ ENTER. 1 Press BAND until the band you want appears in the display. 2 Tune in a station you want. 3 Hold down the number buttons that you want to preset the new station for about 2 seconds. The new station replaces the old one. 17EN The Radio Play...