Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
The remaining recording time does not increase even after erasing numerous short tracks Tracks under 12 seconds in length are not counted and so erasing them may not lead to an increase in the recording time. Some tracks cannot be combined with others Track combination may become impossible when tracks are edited. The total recorded time and the remaining time on the MD may not total the maximum recording time (60 or 74 minutes) Recording is done in minimum units of 2 seconds each, no matter how short the material. The contents recorded may thus be shorter than the maximum recording capacity. Disc space may also be further reduced by scratches. Tracks created through editing may exhibit sound dropout during search operations. Track numbers are not recorded correctly Incorrect assignment or recording of track numbers may result when CD tracks are divided into several smaller tracks during digital recording. Also, when the Level Synchro Function is activated during recording, track numbers may not marked as in the original depending on the program source. Display Messages The following table explains the various messages that appear in the display. Also, the deck has a Self- Diagnosis Function (see page 51). Message Meaning Blank Disc A new (blank) or erased MD has been inserted. Cannot Copy An attempt was made to make a second copy from a digitally dubbed MD (see page 47). Cannot Edit An attempt was made to edit the MD during Program or Shuffle Play. Disc Full!! The MD is full (see “System Limitations” on this page). Impossible The deck cannot do the specified editing operation, or while one deck is recording, an attempt was made to record on the other deck with the input set to an impossible combination (see page 8). Name Full!! The titling capacity of the MD has reached its limit (about 1,700 characters). No Disc There is no MD in the deck. NO PROGRAM The Program Play was selected in SET UP menu “PLAY MODE” when the program was not made. Premastered An attempt was made to record on the premastered MD. Flashing clock • The clock has not been set. indication • The contents recorded by timer have disappeared over time and are not be available for saving to disc, or Program Play could not be activated since the program has disappeared over time. Edit Cancel The editing operation was canceled. Edit Error Editing could not be performed properly so the editing operation was canceled. No Name!! The disc or track has not been labeled. Off Time NG! The TIMER OFF time is the same as the TIMER ON time. Set Clock!! The clock has not been set, so the timer cannot be set. Set Timer!! The timer has not been set. No Date!! The recording date and time have not been recorded for the specified track. Timer Cancel The timer function was canceled. Program Full The program contains the maximum number of tracks. You cannot set additional tracks. Check Rec There is not enough time remaining on Time! the dubbing destination disc. Additional Information Additional Information “TOC Reading” appears for a long time If the inserted recordable MD is brand new, “TOC Reading” appears in the display longer than for MDs that have been used. Limitations when recording over an existing track • The correct remaining recording time may not be displayed. • You may find it impossible to record over a track if that track has been recorded over several times already. If this happens, erase the track using the Erase Function (see page 32). • The remaining recording time may be shortened out of proportion to the total recorded time. • Recording over a track to eliminate noise is not recommended since this may shorten the duration of the track. • You may find it impossible to label a track while recording over it. The correct recorded/playing time may not be displayed during playback of monaural-format MDs. Troubleshooting If you experience any of the following difficulties while using the deck, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. The deck does not operate or operates poorly. /The MD may be damaged (“Disc Error!! ” appears). Take the MD out and insert it again. If “Disc Error!! ” remains, replace the MD. The deck does not play back. /Moisture has formed inside the deck. Take the MD out and leave the deck in a warm place for several hours until the moisture evaporates. /The deck is not on. Press 1/uto turn the deck on. /The MD is inserted in the wrong direction. Slide the MD into the disc slot with the label side up and the arrow pointing towards the opening. /The MD may not be recorded. Replace the disc with one that has been recorded. The deck does not record. /The MD is record-protected (“Protected!! ” and “C11” appear). Close the record-protect slot (see page 10). /The deck is not connected properly to the sound source. Make connections properly to the sound source. /The recording level is not adjusted properly. Adjust the recording level properly (see page 9)....