Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
The picture of your TV becomes unstable. • If you are listening to an FM program near the TV with an indoor antenna, move the player away from the TV. The CD does not play/“00 -- --” lights in the display even when a CD is in place. • Make sure that the disc compartment is closed. • Place the CD with the label surface up. • Clean the CD. • Take out the CD and leave the disc compartment open for about an hour to dry moisture condensation. • Make sure the FUNCTION selector is set to CD. The sound drops out. • Reduce the volume. • Clean the CD, or replace it if the CD is badly damaged • Place the player in a location free from vibration. The tape does not move when you • Close the cassette compartment securely. press an operation button. The REC r button does not • Make sure the safety tab on the cassette is in function/The tape does not play. place. The tape does not erase completely. • Clean the erasing heads (see page 22.) • Replace all the batteries with new ones if they are weak. 20ENE Additional Information CFD-222L/DW222.E.G._3-858-169-3X.CED.CEK.EE1.E23.EA1.JEC Symptom Remedy The tape does not record. • Make sure the tape is inserted properly. • Make sure the safety tab of the cassette is in place. The audio is weak/The audio quality is poor. • Clean the heads, pinch roller and capstan (See page 22). • Demagnetize the heads using a demagnetizer (see page 22). The sound is distorted. • The TYPE II (high position) or TYPE IV (metal) tape is being used. Use TYPE I (normal) tape only. Tape Player After trying the above remedies, if you still have problems, unplug the AC power cord and remove all the batteries. After all the indications in the display disappear, plug the power cord and insert the batteries again. If the problem persists, please consult your nearest Sony dealer. 21EN Additional Information CFD-222L/DW222.E.G._3-858-169-3X.CED.CEK.EE1.E23.EA1.JEC MaintenanceE Cleaning the lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available blower. Cleaning the tape heads and tape path Wipe the heads, the pinch roller and the capstan with a cleaning swab slightly moistened with cleaning fluid or alcohol after every 10 hours of operation for optimum playback and recording quality. To make the best possible recording, however, we recommend that you clean all surfaces over which tape travels before each recording. Deck B Lens Erase head Pinch roller Capstan Playback head Capstan Pinch roller Deck A Record/playback head After cleaning, insert a tape when the areas cleaned are completely dry. 22ENE Additional Information Demagnetizing the tape heads After 20 to 30 hours of use, enough residual magnetism will have built up on the tape heads to begin to cause loss of high frequency sound and hiss. At this time, you should demagnetize the heads and all metal parts in the tape path with a commercially available tape head demagnetizer. Cleaning the cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. CFD-222L/DW222.E.G._3-858-169-3X.CED.CEK.EE1.E23.EA1.JEC SpecificationsE CD player section System Compact disc digital audio system Laser diode properties Material: GaAlAs Wave length: 780 nm Emission duration: Continuous Laser output: Less than 44.6 .W (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Spindle speed 200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels 2 Frequency response 20 - 20,000 Hz +1/-2 dB Wow and flutter Below measurable limit Radio section Frequency range CFD-222L/DW222L FM Italy 87.5 - 108 MHz Central and eastern 65 - 108 MHz Europe Other countries 87.6 - 107 MHz MW Italy 526.5 - 1606.5 kHz Other countries 531 - 1,602 kHz LW Italy 148.5 - 283.5 kHz Other countries 153 - 279 kHz CFD-DW222 FM Saudi Arabia 87.6 - 107 MHz Tourist model 76 - 108 MHz Other countries 87.6 - 108 MHz AM Tourist model 530 - 1,629 kHz Other countries 530 - 1,605 kHz IF FM: 10.7 MHz AM (MW)/LW: 455 kHz Aerials FM: Telescopic aerial AM (MW)/LW: Built-in ferrite bar aerial Cassette-corder section Recording system 4-track 2 channel stereo Fast winding time Approx. 140 s (sec.) with Sony cassette C-60 Frequency response TYPE I (normal): 70 - 10,000 Hz General Speaker Full range: 10 cm dia., 4 ohms, cone type (2) Outputs Headphones jack (stereo minijack) For 16 - 68 ohms impedance headphones Maximum power output 4.5 W + 4.5 W Power requirements CFD-222L/DW222L United Kingdom 230 - 240 V AC, 50 Hz Other countries 220 - 230 V AC, 50 Hz CFD-DW222 110 - 120 V, 220 - 240 V AC selectable 50/60 Hz 12 V DC, 8 R20 (size D) batteries Power consumption AC 26 W Battery life For CD radio cassette-corder: FM recording Sony R20P: approx. 13.5 h Sony alkaline LR20: approx. 19 h Tape playback Sony R20P: approx. 7.5 h Sony al...
Este manual também é adequado para os modelos :Jogadores - CFD-DW222L (904.51 kb)