Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
To cancel the Combine Function Press EDIT/NO or p. You can undo a track combination Divide the tracks again (see “Dividing Recorded Tracks” on page 26), then repeat the combine function with the correct tracks if necessary. Note If “Sorry” appears in the display, the tracks cannot be combined. This sometimes happens when you’ve edited the same track many times, and is due to a technical limitation of the MD system, not a mechanical error. Moving Recorded Tracks (Move Function) Use the Move Function to change the order of any track. After you move a track, the track numbers between the new and old track positions are automatically renumbered. Example: Moving track C to track position 2 Track 1 2 3 4 number Moving 1 Turn AMS until the track number you want to move appears in the display. 2 Press EDIT/NO repeatedly until “Move ?” appears in the display. 3 The track number to be moved and the new track position appears. • ••• • • • • • • • •• •• ••• ) 0§ =+ flprYESEDIT/NO = AMS + Track number New track to be moved position 4 Turn AMS until the new track position appears. 5 Press YES or AMS. After you have moved the track, “Complete” appears for a few seconds and the moved track begins playing back if the deck is in playback mode. To cancel the Move Function Press EDIT/NO or p. 28EN Editing Recorded MDs Editing Recorded MDs Labeling Recordings (Title Function) You can create titles for your recorded MDs and tracks. Titles — which may consist of uppercase and lowercase letters, numbers and symbols for a maximum of about 1,700 characters per disc — appear in the display during MD operation. DISPLAY/CHAR 0/) • ••• • • • • • • • •• •• ••• ) 0§ =+ flpr EDIT/NO = AMS + YES Use the following procedure to label a track or an MD. You can label a track while it is playing, pausing or recording. If the track is playing or recording, be sure to finish labeling before the track ends. If the track ends before you’ve completed the labeling procedure, the characters already entered are not recorded and the track will remain unlabeled. 1 Press EDIT/NO repeatedly until “Name in ?” appears in the display, then do the following: To label Make sure that the deck is A track Playing, pausing, recording the track to be labeled, or stopped after locating the track to be labeled An MD Stopped with no track number appearing in the display 2 Press YES. A flashing cursor appears in the display. 3 Press DISPLAY/CHAR to select the character type as follows: To select Press DISPLAY/CHAR repeatedly until Uppercase letters “A” appears in the display Lowercase letters “a” appears in the display Numbers “0” appears in the display 4 Turn AMS to select the character. The selected character flashes. Letters, numbers, and symbols appear in sequential order as you turn AMS. You can use the following symbols in titles: ! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ ` You can press DISPLAY/CHAR to change the character type at any time during Step 4 (see Step 3). 5 Press AMS to enter the selected character. The cursor shifts rightward and waits for the input of the next character. 6 Repeat Steps 3 to 5 until you have entered the entire title. If you entered the wrong character Press 0 or ) until the character to be corrected starts flashing, and repeat Steps 3 to 5 to enter the correct character. To erase a character Press 0 or ) until the character to be erased starts flashing, then press EDIT/NO. To enter a space Press AMS or ) while the cursor is flashing. (Continued) 29EN Editing Recorded MDs Editing Recorded MDs 7 Press YES. This completes the labeling procedure and the title appears on the left side of the display. To cancel labeling Press p. Note You cannot label a track or an MD while you are recording over an existing track. Labeling tracks and MDs with the remote Alphabet/number buttons CLEAR NAME p CHAR NUM 0/) 1 Press NAME repeatedly until a flashing cursor appears in the display, then do the following: r6)0+= pP· 3 Enter one character at a time. After you enter a character, the cursor shifts rightward and waits for the input of the next character. 4 Repeat Steps 2 and 3 until you have entered the entire title. If you entered the wrong character Press 0 or ) until the character to be corrected starts flashing. Press CLEAR to erase the incorrect character, then enter the correct one. 5 Press NAME again. The entered title appears on the left side of the display window after the label has been recorded. To cancel labeling Press p. Changing an existing title Z 1 Press NAME, then do the following: To change Make sure that the deck is A track title Playing, pausing the track whose title is to be changed, or stopped after locating the track whose title is to be changed To label Make sure that the deck is A track Playing, pausing, recording the track to be labeled, or stopped after locating the track to be labeled An MD Stopped with no track number appearing in the display 2 Select the character type as follows: To select Press A disc name Stopped with...
Este manual também é adequado para os modelos :Jogadores - MDS-S38 (1.7 mb)