Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
1 Press p6to open the tape compartment and insert a blank tape. Use TYPE I (normal) tape only. With the side you want to record on facing upward 2 Select the program source you want to record. Display To record from the CD player, press CD and insert a CD (see page 4). To record from the radio, press FM or AM and tune in the station you want (see page 6). Basic Operations Press rto start recording. ((is depressed automatically). Tips • Adjusting the volume or the audio emphasis (page 19) will not affect the recording level. • For the best results, use the AC power as a power source for recording. • To erase a recording, proceed as follows: 1 Press TAPE until “TAPE” appears in the display. Insert the tape whose recording you want to erase into the tape compartment. 2 Press r. Use these buttons for additional operations POWER p6 P To Press Stop recording p6 Pause recording P Press the button again to resume recording. Turn on/off the power POWER Basic Operations Basic Operations The CD Player Using the display DISPLAY/ENTER You can check information about the CD using the display. Checking the total track numbers and playing time Check the display in stop mode. Total track numbers Total playing time Checking the remaining time Press DISPLAY/ENTER while playing a CD. To display Press DISPLAY/ENTER Remaining time on the Once current track* Remaining time on the CD Twice and the number of tracks left Playing time and the current Three times track number * For a track whose number is more than 20, the remaining time appears as “- -:- -” in the display. The CD Player Locating a specific track You can quickly locate any track using the number buttons. You can also find a Number specific point in a track while playing a buttons CD. =/+ The CD Note You cannot locate a specific track if “SHUF” or ”PGM” is lit in the display. Turn off the indication by pressing p. Tip When you locate a track numbered over 10, press >10 first, then the corresponding number buttons. Example: To play track number 23, press >10 first, then 2 and 3. To locate Press a specific track directly a number button of the track. a point while listening to the sound +(forward) or = (backward) while playing and hold down until you find the point. a point while observing the display +(forward) or = (backward) in pause and hold down until you find the point. The CD Player Playing tracks repeatedly (Repeat Play) Number You can play tracks repeatedly in buttons normal, shuffle or program play modes (see page 16). Tip To enjoy a short repeat play, use LOOP. As soon as you press and hold LOOP during play, the player starts a loop play of the part between the point where you pressed LOOP and a point about a second behind. When you release LOOP, the player returns to normal play. MODE ( CD 1 Press CD. 2 Press MODE (PLAY MODE on the player) repeatedly until the repeat mode you want appears in the display. To repeat Select a single track “REP 1” all tracks “REP ALL” tracks in random order “SHUF” “REP” programed tracks “PGM” “REP” 3 Do either of the following to start repeat play: • When you’ve selected “REP 1”, select the track by pressing the number button (pressing =or +then ^on the player). • When you’ve selected “REP ALL” and “SHUF” “REP”, press ((^on the player). • When you’ve selected “PGM” “REP”, program tracks (see step 3 on page 16), then press ((^ on the player). To cancel Repeat Play Press MODE until “REP” disappears from the display. The CD Player Playing tracks in random order (Shuffle Play) You can play tracks in random order. The CD On the player 1 Press CD. 2 Press PLAY MODE repeatedly until “SHUF” appears in the display. 3 Press ^. MODE ( CD 1 Press CD. 2 Press MODE repeatedly until “SHUF” appears in the display. 3 Press (to start shuffle play. To cancel Shuffle Play Press MODE until “SHUF” disappears from the display. The CD Player Creating your own program (Program Play) Number You can arrange the playing order of up to 20 tracks on a CD. On the player 1 Press CD. 2 Press PLAY MODE until “PGM” appears in the display. 3 Press the =or +then press DISPLAY/ENTER for the tracks you want to program in the order you want. 4 Press ^. buttons MODE ( CD 1 Press CD. 2 Press MODE until “PGM” appears in the display. 3 Press the number buttons on the remote for the tracks you want to program in the order you want. You can program up to 20 tracks. Programed track Playing order 4 Press (to start program play. The CD Player Tips • You can play the same program again, since the program is saved until you turn off the power or open the CD compartment. • The current program will be erased if you open the CD compartment. • You can record your own program. After you’ve created the program, insert a blank tape and press rto start recording. To cancel Program Play Press MODE until “PGM” disappears from the display. To check the order of tracks before play Press DISPLAY/ENTER. Every time you press the button, the track number appears in the programed order. To change...