Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Jogadores - D-NE301 (649.46 kb)
Jogadores - D-NE301 (656.71 kb)
Jogadores - D-NE301 (653.39 kb)
Facilidade de uso
(page 26) c Connect the AC power adaptor to an AC outlet securely. (page 14) c Press u/ENTER* after one second or more has passed since the AC power adaptor was connected. c The CD-R/RW is blank. c There is a problem with the quality of the CD-R/RW, recording device, or application software. *Use u for remote control. (Continued) Additional information 31 Troubleshooting Symptom Cause and/or corrective action “HOLD” flashes in the c The buttons are locked. Slide the HOLD switch back. (page 24) display when you press a button, and the CD does not play. Playback starts from the point you stopped. (resume function) Rustling noise is heard from the CD. During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally. c c c The resume function is working. To start play from the first track, press and hold u/ENTER* during stop until the first track starts playing, or open the lid of the CD player. Or remove all power sources, then insert the batteries or connect the AC power adaptor again. (pages 14, 15, 26) Close the lid of the battery compartment firmly. (page 26) The CD player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. The player is not malfunctioning. “NO FILE” appears on the display after you press u/ ENTER* or when the lid of the CD player is closed. c c c There are no ATRAC3plus/ATRAC3/MP3 files in the CD. A CD-R/RW from which the data has been erased is being used. The CD is dirty. When closing the lid of the CD player, the CD starts to rotate. c The CD player is reading the information on the CD. The player is not malfunctioning. The LCD display becomes hard to see or slows down. c You are using your CD player at high temperatures (above 40°C/ 104°F) or at low temperatures (below 0°C/32°F). At room temperature, the display will return to its normal operating condition. You cannot operate the CD player properly using the remote control. c The buttons on the CD player are kept pressed by mistake. Play is stopped abruptly. c OFF TIMER has been set. Change the setting to “OFF.” *Use u for remote control. Specifications System Compact disc digital audio system Laser diode properties Material: GaAlAs Wavelength: . = 770 - 800 nm Emission duration: Continuous Laser output: Less than 44.6 .W (This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) D-A conversion 1-bit quartz time-axis control Frequency response +1 20 - 20 000 Hz –2 dB (measured by JEITA) Output (at 4.5 V input level) Headphones (stereo minijack) Approx. 5 mW + Approx. 5 mW at 16 . (Approx. 1.5 mW + Approx. 1.5 mW at 16 .)* *For the customers in Europe Power requirements •Two LR6 (size AA) batteries: 1.5 V DC . 2 •AC power adaptor (DC IN 4.5 V jack): 220 V, 50 Hz (Model for China) 120 V, 60 Hz (Model for Mexico) Battery life*1 (approx. hours) When you use the CD player on a flat and s...