Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Warning: to reduce the risk of electric shock, do not remove cover (or back) no user -serviceab le p a rts inside. Refer servicing to qualified service personnel. The exclamation point within a n equilater al triang le is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to a l ert the u s er t o the pr e s en ce o f un insu lat e d “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11. Only use attachments/ accessories specified by the manufacturer. 12. Unplug the apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. This appliance shall not be exposed to dripping or splashing water and objects filled with liquids such as vases must not be placed on apparatus. CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE TO WIDE FULLY INSERT. 1 CAUTION: To avoid electric shock, this unit must not be exposed to dripping or splashing water Minimum distances around the apparatus for sufficient ventilation; The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus; Before scrapping the appliance, remove the batteries and place them in the appropriate battery collection container. LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt repair. CAUTION CLEANING: Always disconnect unit from power supply before attempting to clean it. Use soft cloth moistened with soapy water, wipe gently. Do not use solvents or abrasive materials. CAUTION CLASS 1 LASER PRODUCT Use of Controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. CAUTION: HAZARDOUS LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT 2 INSTALLATION 3 INSTALLATION (Wall Mounting) 4 PEDESTAL INSTALLATION 1. Set the unit on the pedestal (1). 2. To fix the insert, then fix it by 2 pcs screws as (2). PLACE AND FIX THE SPEAKER Insert the speaker stud into the hole of the main unit as (1). Push the speaker down to the end until click sound is heard to confirm fixed as (2). DISASSEMBLE THE SPEAKER Pushing the speaker up from the back side as (1). Release the speaker from the main unit speaker holder as (2). 1 2 Position the bracket (supplied) on the wall (as show below) where you want to hang the center unit. Drill 2 holes slightly undersized for a firm fit. Secure the bracket on the wall using 2 dowels and 2 screws (supplied) The mounting screws are to be anchored into solid wall support, such as wood frame or concrete wall. Mount the center unit onto the wall bracket. Make sure the mounting tab on the center unit fits securely into the mounting slot on the wall bracket. Screws and plastic dowels are also provided for speakers if they are to be wall-mounted away from the center section. 1 1 1 1 2 2 2 2 2 2 1 1 5 LOCATION OF CONTROLS TOP VIEW FRONT VIEW REAR VIEW 18. SPEAKER Terminal 19. AC Input Socket 20. SUBWOOFER Jack To connect with external sub-woofer speaker (not included) 21. HEADPHONE Jack (3.5mm) 22. FM Antenna 23. AUX Socket (R) 24. AU...