Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Other Operations
Additional Information
Precautions
Troubleshooting
Specifications
Discs that this unit CAN play
General
Bluetooth device
CD player section
Presetting radio stations
System
Compatible devices
Audio CD (CD-DA*1 tracks)
The power does not turn on when the AC
There is no sound.
Compact disc digital audio system
CD-R/CD-RW that contains MP3/WMA files and
You can store radio stations in the unit’s memory.
is finalized*2 correctly.
power cord is connected.
Laser diode properties
Make sure that this unit is not too far from the
Compatible USB devices
You can preset up to 30 radio stations, 20 for FM
*1
Make sure the AC power cord is connected to
Emission duration: Continuous
Bluetooth device (or smartphone), or that this
CD-DA is the abbreviation for Compact Disc Digital
and 10 for AM.
Compatibility requirements for the USB devices
the wall outlet securely.
Laser output: Less than 44.6 μW
unit is not receiving interference from a
are as follows. Before using a device with this
Audio. It is a recording standard used for audio
(This output is the value measurement at a
wireless LAN, another 2.4 GHz wireless device,
1
CDs.
Press RADIO FM/AM repeatedly to
unit, check that it meets the requirements.
*2
The power does not turn on during
distance of 200 mm from the objective lens
or a microwave oven.
Finalizing is the process to make the CD-R/CD-RW
select a band.
discs playable on the consumer disc player
battery operation.
surface on the optical pick-up block with 7 mm
Compliance with USB 2.0 (Full Speed)
Check that the Bluetooth connection was
products, and the finalizing can be enabled or
Make sure the batteries are inserted correctly.
aperture.)
Supports Mass Storage mode*
completed properly between this unit and the
Number of channels
disabled as optional settings during disc creation
Bluetooth device (or smartphone).
* Mass Storage mode is a mode that allows a USB
in most recording software.
“LOW” and “BATTERY” are displayed
2
device to become accessible to a host device,
Perform pairing again (See “Making a wireless
alternately and the unit turns off
Frequency response
enabling file transfers. Most USB devices
connection with Bluetooth devices”).
Discs that this unit CANNOT play
automatically.
20 Hz 20,000 Hz +1/–2 dB
support Mass Storage mode.
Keep away from metal objects or surfaces.
2
Wow and flutter
Hold down RADIO FM/AM-AUTO PRESET
CD-R/CD-RW other than those recorded in
Replace all the batteries with new ones.
Make sure that the Bluetooth function is
Below measurable limit
audio CD format or formats conforming to
until “AUTO” flashes on the display.
To select a memory on the device for
activated on the Bluetooth device (or
playback or recording
ISO 9660 Level 1/Level 2 or Joliet
The unit enters standby mode
smartphone).
Bluetooth section
If the USB device has more than one memory (for
CD-R/CD-RW of poor recording quality, CD-R/
unexpectedly.
Communication System
example, an internal memory and a memory
CD-RW with scratches or that is dirty, or CD-R/
This is not a malfunction. The unit enters
The sound skips or the correspondence
Bluetooth Specification Version 3.0
card), you can select which memory to use and
CD-RW recorded using an incompatible
standby mode automatically after about 15
distance is short.
Output
then start playback or recording. Make sure to
recording device
minutes if there is no operation or audio signal
Bluetooth Specification Power Class 2
If a device that generates electromagnetic
select a memory before starting playback or
CD-R/CD-RW that is unfinalized or finalized
output. See “To use the power-management
Maximum communication range
radiation, such as a wireless LAN, other
recording as you cannot select a memory during
incorrectly
Line of sight approx. 10 m*1
3
function.”
Press ENTER to store the station.
Bluetooth device(s), or a microwave oven is
operation.
Frequency band
nearby, move away if possible. Or use the
* and VOLUME + have a tactile dot.
The stations are stored in memory from lower
Notes on discs
There is no sound.
2.4 GHz band (2.4000 GHz 2.4835 GHz)
device and the unit away from such sources.
frequencies to higher ones.
1 Connect the USB device to the (USB)
Before playing, clean the CD with
Make sure the appropriate function is selected
Modulation method
Remove any obstacle between this unit and
port .
a cleaning cloth. Wipe the CD
for the music or sound source you want to
FHSS
the device or move the device and the unit
Playing tracks/files in random order
from the center out. If there are
listen to.
Supported Bluetooth Profiles*2
Using the display
2 Press USB to turn on the USB function.
away from the obstacle.
(Shuffle Play)
scratches, dirt or fingerprints on
Unplug the headphones when listening
A2DP (Advanced Audio Distribution Profile)
3 Press USB-MEMORY SELECT until
Locate this unit and the device as close to each
the CD, a tracking error may occur.
AVRCP*3 (Audio/Video Remote Control Profile)
You can set the unit to play CD-DA tracks on an
through speakers.
“SELECT?” appears on the display.
other as possible.
Supported codec*4
Do not use solvents such as
Checking MP3/WMA file information
audio CD or MP3/WMA files on a CD-R/CD-RW
Re-position this unit.
benzine, thinner, commercially
SBC (Subband Codec)
disc or on a USB device in random order.
The sound is noisy.
Press DISPLAY repeatedly while playing
If a station cannot be preset
available cleaners or anti-static
Try using the Bluetooth device or smartphone
Is someone using a mobile phone or other
*1 The actual range will vary depending on factors
1
spray intended for vinyl LPs.
in another position.
such as obstacles between devices, magnetic
an MP3/WMA file on the disc/USB device.
Press CD or USB to turn on the CD
automatically
equipment emitting radio waves near the unit?
fields around a microwave oven, static
or USB function.
You need to preset a station with a weak signal
Do not expose the CD to direct sunlight or heat
If so, move the unit and the Bluetooth device
A connection cannot be established.
electricity, reception sensitivity, aerial
manually.
sources such as hot air ducts, or leave it in a
away from such devices. Devices such as
performance, operating system, application
4 Press ENTER .
car parked in direct sunlight as there can be a
mobile phones, etc., can affect Bluetooth
Depending on the device to be connected, it
software, etc.
1 Press RADIO FM/AM repeatedly to
5 Press or repeatedly to select
considerable rise in temperature inside the car.
communication.
may require some time to start
*2 Bluetooth standard profiles provide the
select a band.
communication.
a memory number.
Do not stick paper or a sticker on the CD, or
specifications for Bluetooth communication
scratch the surface of the CD.
Perform pairing again (See “Making a wireless
The memory name appears. The name will be
CD/MP3/WMA player
between devices.
The display changes as follows:
2 Press MODE repeatedly until “SHUF”
connection with Bluetooth devices”).
*3 Some operations may not be available
displayed in various ways, depending on the
After playing, store the CD in its case.
Check that the Bluetooth device is compatible
depending on the device.
Song title ( )*1
appears on the display.
specifications of the USB device.
The CD player does not play or “NO DISC”
Note on DualDiscs
with this unit. For the latest information on
If only one memory can be selected, proceed
is displayed even when a CD is in place.
*4 Codec: Audio signal compression and
compatible Bluetooth devices, check the
conversion format
to step 6.
A DualDisc is a two sided disc product which
Artist name ( )*1
Place the CD with the label side up.
2 Tune to the desired station.
information on the website. The URL is listed
6 Press ENTER .
mates DVD recorded material on one side with
Clean the CD.
Radio section
under “Compatible Bluetooth devices.”
3 Hold down MANUAL PRESET until
digital audio material on the other side.
Take out the CD and leave the CD
Frequency range
Album name ( )*1
However, since the audio material side does
“FM-xx” or “AM-xx” flashes on the display.
Notes on the USB device
compartment open for about an hour to dry
European, Taiwan, UAE and Thai models
Pairing fails.
3 Press to start Shuffle Play.
Operation is not always guaranteed, even if the
not conform to the Compact Disc (CD)
FM: 87.5 MHz 108 MHz (50 kHz step)
(Example: FM)
moisture condensation.
USB devices meet the compatibility requirements.
standard, playback on this product is not
Bring the Bluetooth device closer to the unit.
AM: 531 kHz 1,602 kHz (9 kHz step)
Current file number and playing time*2
guaranteed.
The CD-R/CD-RW is blank or unfinalized.
When a USB device is connected, the unit reads all
Delete the model name of this unit from the
the files on the device. If there are many folders or
There are no playable MP3/WMA files on the
Uruguay, Paraguay, Peru, Chile and Bolivia
Bluetooth device and perform pairing again
*1 If the file does not have corresponding ID3 or
files on the device, it may take a long time for the
Music discs encoded with copyright
disc.
models
(See “Making a wireless connection with
WMA tag information, the file name, “NO ARTIST,”
FM: 87.5 MHz 108 MHz (100 kHz step)
unit to finish reading them.
and “NO ALBUM” scroll instead of the song title,
protection technologies
There is a problem with the quality of the
Bluetooth devices”).
87.5 MHz 108 MHz (50 kHz step)
artist name, and album name, respectively.
Do not connect a USB device to the unit through a
CD-R/CD-RW, recording device or application
This product is designed to playback discs that
Check that the Bluetooth device is compatible
USB hub.
AM: 530 kHz 1,610 kHz (10 kHz step)
*2 The artist name or album name will change to this
To cancel Shuffle Play
conform to the Compact Disc (CD) standard.
software.
with this unit. For the latest information on
531 kHz 1,602 kHz (9 kHz step)
in a few seconds.
Press to stop playback, and then press
4 Press PRESET + or until the preset
With some connected USB devices, after an
Recently, various music discs encoded with
Replace all the batteries with new ones if they
compatible Bluetooth devices, check the
MODE repeatedly until “SHUF” disappears
operation is performed, there may be a delay
copyright protection technologies are
information on the website. The URL is listed
Latin American models except for Uruguay,
number for the station you want flashes
are exhausted.
before it is performed by this unit.
Checking the free space on the USB
from the display.
marketed by some record companies. Please
under “Compatible Bluetooth devices.”
Paraguay, Peru, Chile, Bolivia and Brazil models
on the display.
This unit may not support all the functions
FM: 87.5 MHz 108 MHz (100 kHz step)
device
be aware that among those discs, there are
The sound drops out.
Tips
provided with a connected USB device.
some that do not conform to the CD standard
Reduce the volume.
Pairing using the NFC function fails.
AM: 530 kHz 1,710 kHz (10 kHz step)
The playback order on this unit may differ from
1 Press MODE repeatedly to cancel
During Shuffle Play, you cannot select the previous
and may not be playable by this product.
Try pairing manually (See “Making a wireless
Other models
track/file by pressing .
the playback order on a connected USB device.
Clean the CD, or replace it if the CD is badly
folder play mode, folder repeat play
connection with Bluetooth devices”). Some
FM: 87.5 MHz 108 MHz (50 kHz step)
Resume Play is available when using Shuffle Play
This unit cannot be used to charge USB devices.
damaged.
On safety
NFC-compatible smartphones may not be
87.5 MHz 108 MHz (100 kHz step)
mode, program play mode or program
mode in the USB function. Press after you
Place the unit in a location free from vibrations.
have stopped Shuffle Play by pressing .
As the laser beam used in the CD player
paired using the NFC function of this unit,
AM: 531 kHz 1,602 kHz (9 kHz step)
repeat play mode.
5 Press ENTER to store the station.
Compatible Bluetooth devices
Clean the lens with a commercially available
Shuffle Play starts from the point where you
section is harmful to eyes, do not attempt to
depending on the features or specifications of
530 kHz 1,610 kHz (10 kHz step)
Compatibility requirements for the devices are as
blower.
stopped.
If another station is already assigned to the
disassemble the casing. Refer servicing to
the device.
Intermediate frequency
selected preset number, that station is
follows. Before using a device with this unit,
The sound may drop out or noise may be
qualified personnel only.
FM: 128 kHz
check that it meets the requirements.
Relaunch “NFC Easy Connect” and move the
heard when using a poor quality CD-R/CD-RW
Creating your own program (Program
replaced by the new one.
Should any solid object or liquid fall into the
smartphone slowly over the N mark .
AM: 45 kHz
or if there is a problem with the recording
Devices must conform to Bluetooth Standard
Play)
Antennas
unit, unplug the unit, and have it checked by
version 3.0.
device or application software.
Check that the smartphone meets the
FM: Telescopic antenna
qualified personnel before operating it any
compatibility requirements (See “Compatible
2 Press DISPLAY while the USB device is
You can arrange the playing order of up to 25
Devices must support A2DP (Advanced Audio
AM: Built-in ferrite bar antenna
further.
tracks/files on a disc/USB device.
Starting playback takes more time than
smartphones”).
stopped.
Distribution Profile) and AVRCP (Audio/Video
Discs with non-standard shapes (e.g., heart,
usual.
Input
1 Press CD or USB to turn on the CD
Remote Control Profile).
square, star) cannot be played on this unit.
The following discs take a longer time to start
Radio
AUDIO IN
or USB function.
Tip
NFC capability (required only when using the
Attempting to do so may damage the unit. Do
Stereo mini jack
The preset radio stations remain in the unit’s
playback.
NFC pairing function of the unit).
not use such discs.
The sound is weak or reception is poor.
(USB) port
memory even in the following situations.
A disc recorded with a complicated tree
For the latest information on compatible
The AC power cord is unplugged.
structure.
Replace all the batteries with new ones.
Type A, maximum current 500 mA, USB 2.0 Full
On power sources
Bluetooth devices, including NFC-compatible
The batteries are removed.
A disc that has many folders or non-MP3/
Speed compatible
Move the unit away from nearby TVs.
smartphones, check the websites below.
“FREE***G”/“FREE***M” (remaining storage
For AC operation, use the supplied AC power
WMA files.
For FM reception, extend the aerial to its full
cord; do not use any other cord.
Output
space on the device, in gigabytes/megabytes)
2
For customers in Europe:
Press MODE repeatedly until “PGM”
length, and reorient it for best FM reception.
(headphones) stereo mini jack
appears on the display.
http://support.sony-europe.com/
Unplug the unit from the wall outlet if it is not
For AM reception, reorient the unit itself to find
appears on the display.
Listening to preset radio
USB device
For 16 32 impedance headphones
For customers in Latin America:
to be used for an extended period of time.
the best reception.
Checking the connected Bluetooth
stations
http://esupport.sony.com/LA
When not using the batteries, remove them to
The USB device does not work properly.
Supported audio formats
If you are in a building, listen near a window.
avoid damage that can be caused by battery
device name
For customers in other countries/regions:
Supported bit rates
If you connect an incompatible USB device, the
If a mobile phone is placed close to the unit, a
http://www.sony-asia.com/support
leakage or corrosion.
MP3 (MPEG 1 Audio Layer-3):
loud noise may be heard from the unit. Keep
Press DISPLAY while connecting the
1 Press RADIO FM/AM repeatedly to
following problems may occur.
On placement
32 kbps 320 kbps, VBR
The USB device is not recognized.
the phone away from the unit.
Bluetooth device.
select a band.
WMA:
3 Press or to select a track/
File or folder names are not displayed on this
Do not leave the unit in a location near heat
48 kbps 192 kbps, VBR
The TV picture is unstable.
file.
unit.
What is Bluetooth wireless
sources, in a place subject to direct sunlight,
Sampling frequencies
excessive dust or mechanical shock, or in a car
Playback is not possible.
If you are listening to an FM program near a TV
When you want to specify a folder that
MP3 (MPEG 1 Audio Layer-3):
technology?
with an indoor antenna, move the unit away
contains MP3/WMA files, press (Folder) + or
subject to the direct rays of the sun.
The sound skips.
32/44.1/48 kHz
from the TV.
first to select a folder, and then press
There is noise.
Do not place the unit on an inclined or
WMA:
or to select a file.
2 Press PRESET + or to select a stored
Bluetooth wireless technology is a short-range
unstable surface.
The sound output is distorted.
32/44.1/48 kHz
wireless technology that enables wireless data
After trying the suggested remedies, if the
Do not place anything within 10 mm of the rear
Checking the radio information
preset number for the desired radio
communication between digital devices, such as
“OVER CURRENT” appears.
problem persists, unplug the AC power cord or
General
of the cabinet. The ventilation openings must
remove all the batteries. After all the indications
Speaker
Press DISPLAY repeatedly while listening
station.
a computer and digital camera. Bluetooth
be unobstructed for the unit to operate
An abnormal level has been detected in the
on the display disappear, plug in the AC power
Full range, 8 cm dia., 3.2 , cone type (2)
wireless technology operates within a range of
to the radio.
properly and prolong the life of its
electrical current from the (USB) port .
about 10 m.
components.
Turn off the unit and remove the USB device
cord again, or re-insert the batteries. If the
Power output
problem persists, consult your nearest Sony
2.3 W + 2.3 W (at 3.2 , 10% harmonic
4
Connecting two devices as necessary is common,
Press ENTER .
from the (USB) port . Make sure there is
but some devices can be connected to multiple
Since a strong magnet is used for the speakers,
no problem with the USB device. If this
dealer.
distortion)
keep personal credit cards using magnetic
devices at the same time.
message persists, contact your nearest Sony
Power requirements
coding or spring-wound watches away from
You do not need to use a cable for connection,
dealer.
European, Uruguay, Paraguay, Peru, Chile and
the unit to prevent possible damage from the
Bolivia models
nor is it necessary for the devices to face one
magnet.
230 V AC, 50 Hz (AC power supply)
The display changes as follows:
Connecting optional
another, such is the case with infrared
There is no sound.
9 V DC (6 R14 (size C) batteries)
technology. For example, you can use such a
Preset number* Frequency
The track/file is programmed.
On operation
The USB device may be connected incorrectly.
components
device in a bag or pocket.
Turn off the unit and reconnect the USB device.
Brazil model
Press ENTER to return to the normal display.
The program step number appears, followed
Bluetooth standard is an international standard
If the unit is brought directly from a cold to a
120 V 127 V AC/220 V 230 V AC,
by the total playing time.
Then turn on the unit.
supported by thousands of companies all over
warm location, or is placed in a very damp
* A preset number is displayed only when you are
50/60 Hz, adjustable with voltage selector
(Example: audio CD)
You can enjoy the sound from an optional
room, moisture may condense on the lens
listening to the preset radio station.
the world, and employed by various companies
There is noise, skipping, or distorted
(AC power supply)
component, such as a portable digital music
worldwide.
inside the CD player section. Should this occur,
9 V DC (6 R14 (size C) batteries)
player, through the speakers of this unit.
sound.
the unit will not operate properly. In this case,
Be sure to turn off the power of each component
remove the CD and wait about an hour for the
Turn off the unit and reconnect the USB device.
Latin American models except for Uruguay,
Communication system and compatible
Selecting play mode
before making any connections.
moisture to evaporate.
Then turn on the unit again.
Paraguay, Peru, Chile, Bolivia and Brazil models
Bluetooth profiles of the unit
For details, refer to the instruction manual of the
The music data itself contains noise, or the
120 V AC, 60 Hz (AC power supply)
Profile is standardization of the function for each
component to be connected.
On handling the unit
sound is distorted. Noise may have entered
9 V DC (6 R14 (size C) batteries)
Bluetooth device specification. The unit supports
You can set the unit to play tracks or files
Step number
Do not leave the CD compartment open to
during the creation of audio files. Try
UAE model
the following Bluetooth version and profiles:
repeatedly or in random order while a disc/USB
avoid dust and debris contamination.
re-creating audio files and use them to play on
240 V AC, 50 Hz (AC power supply)
Communication System:
device is stopped.
Last programmed track
this unit.
9 V DC (6 R14 (size C) batteries)
Bluetooth Specification version 3.0
On cleaning the cabinet
Press MODE repeatedly.
number
Compatible Bluetooth Profiles:
The USB device cannot be connected to
Taiwan model
A2DP (Advanced Audio Distribution Profile):
Clean the cabinet, panel and controls using a
120 V AC, 60 Hz (AC power supply)
soft cloth slightly moistened with a mild
the (USB) port .
Transmitting or receiving audio content of
9 V DC (6 R14 (size C) batteries)
detergent solution. Do not use any type of
The connector on the USB device or the USB
high-quality.
abrasive pad, scouring powder, or solvent,
cable is being inserted backwards. Insert it to
Thai model
AVRCP (Audio Video Remote Control Profile):
such as alcohol or benzine.
the (USB) port in the correct direction.
220 V AC, 50 Hz (AC power supply)
To AUDIO
Controlling A/V equipment; pausing,
9 V DC (6 R14 (size C) batteries)
Each time you press the button, the indication
Total playing time*
IN jack
To component
stopping, or starting playback, etc.
If you have any questions or problems
Other models
changes as follows:
“READING” is displayed for an extended
(e.g.,portable
concerning your unit, consult your nearest Sony
time, or it takes a long time before
220 V 240 V AC, 50 Hz (AC power supply)
* “--:--” appears when programming an MP3/
Maximum communication range
Normal play (None)
digital music
dealer.
9 V DC (6 R14 (size C) batteries)
WMA disc/USB device or when the total
playback starts.
Use Bluetooth devices within 10 m (line of sight)
Audio connection cable
player)
Power consumption
playing time is longer than 100 minutes.
of the unit.
The reading process can take a long time in the
(not supplied)
AC 16 W
Single repeat ( 1)
5 Repeat steps 3 and 4 to program
following cases:
Maximum communication range may shorten
Battery Life*1, *2
under the following conditions.
additional tracks/files.
There are many folders or files on the USB
1 Connect the AUDIO IN jack to the line
Messages
device.
Playback of CD
All repeat ( )
6 Press to start Program Play.
There is an obstacle such as a person, metal, or
output jack of the portable digital music
wall between the unit and Bluetooth device.
The file structure is complex.
Approx. 7.5 hours
The created program remains available until
Playback of USB device
player or other component using an
DATA ERROR: An audio file is corrupted.
The memory is almost full.
A wireless LAN device is in use near the unit.
Selected folder play ( )*
you open the CD compartment, remove the
Approx. 7 hours (at 100 mA load)
audio connection cable (not supplied).
The internal memory is fragmented.
A microwave oven is in use near the unit.
ERASE ERROR: Erase of the audio files or folders
Approx. 3.5 hours (at 500 mA load)
USB device or turn off the power of the unit.
2 Turn the connected component on.
failed.
To avoid the above problems, we recommend
A device that generates electromagnetic
FM reception
Selected folder repeat play ( , )*
To play the same program again, press .
3
that you adhere to the following guidelines:
Press AUDIO IN and start playing
radiation is in use near the unit.
FATAL ERROR: The USB device was removed
Approx. 19 hours
during recording or erase operation, and may
Keep the total number of folders on a USB
Bluetooth
sound on the connected component.
The unit is placed on a shelf made of steel.
have been damaged.
device to 100 or less.
Shuffle play (SHUF)
Approx. 10 hours
FULL: You tried to program more than 25 tracks
Keep the total number of files per folder to
*1 Measured by Sony standards. The actual
or files (steps).
100 or less.
battery life may vary depending on the
Program play (PGM)
The unit
circumstances of the unit or operating
LOW BATTERY: The batteries are almost
Note
Erroneous display
conditions.
exhausted.
If you try to program 26 tracks/files or more, “FULL”
The sound from the connected component is
*2 When using Sony alkaline batteries
Program repeat play ( , PGM)
The data stored on the USB device may be
appears on the display.
NO BT: Bluetooth connection is not established.
output from the speakers.
corrupted. Send the music data to the USB
Dimensions
NO DEV: No USB device is connected or the
Approx. 380 mm × 158 mm × 235 mm (W/H/D)
* These functions are available only when playing
Tip
To connect the unit to a TV or VCR, use an
device again.
connected USB device has been removed.
(incl. projecting parts)
MP3/WMA files on an MP3/WMA disc or USB
Resume Play is available when using Program Play
extension cable (not supplied) with a stereo-
This unit can display only numbers and letters
NO STEP: All of the programmed tracks/files
Mass
device.
mode in the USB function. Press after you
mini jack on one end and two phono plugs on
of the alphabet. Other characters will not be
have stopped Program Play by pressing .
have been erased.
Approx. 3.3 kg (incl. batteries)
the other end.
displayed correctly.
Steel cabinet
NO TRK: There are no playable MP3/WMA files
Playing tracks/files repeatedly
Program Play starts from the point where you
Supplied accessories
stopped.
Notes
on the USB device.
“REC ERROR” appears.
(Repeat Play)
AC power cord (1)
If connected to the monaural output jack of a
Optimal performance
NOT IN USED: You tried to perform a specific
An error occurred during recording. Turn off the
Protecting sheet (1)
You can set the unit to repeatedly play CD-DA
To display programmed track/file
digital music player, sound may not be emitted
Limited performance
operation under conditions in which that
unit and remove the USB device from the unit.
tracks on an audio CD, or MP3/WMA files on a
information
through the right speaker of the unit.
operation is prohibited.
Then check the following:
Design and specifications are subject to change
CD-R/CD-RW disc or on a USB device in normal
After creating your own program, you can check
If connected to the line out jack of a digital music
NOT SET: There is no stored preset station.
Check the remaining storage space on the
without notice.
and program play modes.
information about programmed tracks/files.
player, distortion may occur. If the sound is
distorted, connect to the headphones jack instead.
NOT SUPPORT: An unsupported USB device is
USB device. If there is insufficient space for
Interference from other devices
1 Press CD or USB to turn on the CD
Press DISPLAY repeatedly and the display
If connected to the headphones jack of a digital
Because Bluetooth devices and wireless LAN
connected.
the recording, delete any unnecessary files or
or USB function.
changes as follows:
music player, increase the volume of the digital
(IEEE802.11b/g/n) use the same frequency,
PROTECT: The connected USB device is write-
folders.
Total programmed step number Last
music player, and then adjust the volume of the
microwave interference may occur and resulting
protected. Remove the USB device, and then
Check that the data to be recorded is not
programmed track/file number and the total
unit.
in communication speed deterioration, noise, or
clear the write protection, or use another USB
corrupted.
playing time*
invalid connection if the unit is used near a
device.
Check that the file format to be recorded is
wireless LAN device. In such a case, perform the
PUSH STOP: You tried to perform a specific
compatible with the unit.
* “--:--” appears for MP3/WMA discs and USB
following.
operation that is prohibited while playing or
If the message still persists, contact your
2
devices.
Proceed as follows.
Use the unit at least 10 m away from the
paused. Press to stop playback, and then
nearest Sony dealer.
To cancel Program Play
wireless LAN device.
try the operation again.
To repeat
Do this
Press to stop playback, and then press
If the unit is used within 10 m of a wireless LAN
REC ERROR: Recording did not start, stopped
The USB device is not recognized.
A single track/
1 Press MODE repeatedly
MODE repeatedly until “PGM” disappears from
device, turn off the wireless LAN device.
partway, or otherwise could not be performed.
Turn off the unit and reconnect the USB device,
file
until “ 1” appears.
the display.
then turn on the unit.
Use the Bluetooth device as close to the unit as
2 Press or to
possible.
The USB device is not functioning properly.
select a track/file that you
To delete all tracks/files in the current
Refer to the USB device operation manual for
want to repeat. When you
program
Interference to other devices
details on how to deal with this problem.
want to specify a folder that
Stop playback, and then press . “NO STEP”
Microwaves emitting from a Bluetooth device
contains MP3/WMA files,
appears and you can create a new program,
may affect the operation of electronic medical
Play does not start.
press (Folder) + or
following the procedure “Creating your own
devices. Turn off the unit and other Bluetooth
Turn off the unit and reconnect the USB device.
first to select a folder, and
program (Program Play).”
devices in the following locations, as it may
then press or to
cause an accident.
Play does not start from the first track.
select a file.
where inflammable gas is present, in a
Set the play mode to Normal Play.
3 Press to start Repeat
hospital, train, airplane, or a gas station
Play.
near automatic doors or a fire alarm
MP3/WMA files cannot be played back.
All tracks/files
1 Press MODE repeatedly
The audio files may have inappropriate file
Notes
until “ ” appears.
extensions. The file extensions supported by
2 Press to start Repeat
To be able to use the Bluetooth function, the
this unit are as follows:
Bluetooth device to be connected requires the
Play.
MP3: file extension “.mp3”
same profile as the unit’s.
A selected
1 Press MODE repeatedly
Note also that even if the same profile exists,
WMA: file extension “.wma”
folder on an
until “ ” (Folder) and “ ”
devices may vary in function depending on their
The audio files may have been created in
MP3/WMA disc
appear.
specifications.
formats other than MP3/WMA formats.
or USB device
2 Select a folder by pressing
Due to the characteristic of Bluetooth wireless
The USB storage device uses a file system other
technology, the sound played on the unit is
(Folder) + or .
than FAT16 or FAT32.*
slightly delayed from the sound played on the
3 Press to start Repeat
Bluetooth device during listening to the music.
The USB storage device is partitioned. Only
Play.
MP3/WMA files in the first partition can be
This unit supports security capabilities that comply
Programmed
1 Program tracks/files (see
with the Bluetooth standard to provide a secure
played.
tracks/files
“Creating your own program
connection when the Bluetooth wireless
Playback is possible up to 8 directory levels.
(Program Play)”).
technology is used, but security may not be
The number of folders on the device exceeds
enough depending on the setting. Be careful
2 Press MODE until “PGM”
255 (including the “ROOT” folder).
when communicating using Bluetooth wireless
and “ ” appear on the
technology.
The number of files on the device exceeds
display.
5,000.
We do not take any responsibility for the leakage
3 Press to start Repeat
of information during Bluetooth communication.
The number of files per folder exceeds 999.
Play.
A device featuring the Bluetooth function is
The files are encrypted or protected by
required to conform to the Bluetooth standard
passwords.
To cancel Repeat Play
specified by Bluetooth SIG, and be authenticated.
Even if the connected device conforms to the
Press to stop playback, and then press
* This unit supports FAT16 and FAT32, but some USB
above mentioned Bluetooth standard, some
MODE repeatedly until “ ” (or “ 1”)
storage media may not support both file systems.
devices may not be connected or work correctly,
disappears from the display.
For details, refer to the operation manual of the
depending on the features or specifications of the
USB storage device in question or contact the
device.
manufacturer.
Noise or sound skips may occur depending on the
Bluetooth device connected with the unit, the
communication environment or the usage
environment.
ZS-RS70BT_E92 [GB] 4-470-545-15(1)