Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
• Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS 1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE 2 WARNING LABEL, PLACED INSIDE THE UNIT INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK VORSICHT ! CAUTION - DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN DECKEL GEOFFNET UND WENN SICHERHEITSVERRIEGLUNG UBERBRUCKT IST. NICHT DEM STRAHL AUSSETZEN! OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD OCH SPARR AR URKOPPLAD STRALEN AR FARLIG. USYNLIG LASERSTRALING VED ABNING NAR SIKKERHEDSAFBRTDERE ER UDE AF FUNKTION. UNDGA UDS.TTELSE FOR STRALING. VARNING - ADVARSEL - 1. CLASS 1 LASER PRODUCT 2. CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. EN Printed in China 0203NYMBICMTS GETTING STARTED POWER SUPPLY This CD portable system operates on battery or AC power. BATTERY POWER Insert eight D-sized alkaline batteries (not supplied) and you can take your system just about anywhere. Open the battery compartment cover on the back of the unit by pressing down the two tabs. Insert batteries as marked on the unit. Important battery information • If you are not going to use the unit for a month or more, be sure to remove batteries because they can leak and cause damage. • Dispose of batteries in the proper manner, according to federal, state, and local regulations. • Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal injury. AC POWER Plug the AC power cord into the AC IN O jack on the back of the unit, and into an AC power outlet. CAUTIONS: 1. ONLY USE JVC POWER CORD PROVIDED WITH THIS UNIT TO AVOID MALFUNCTION OR DAMAGE TO THE UNIT. REMOVE BATTERIES WHEN USING THE POWER CORD. 2. BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE UNIT IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME. ANTENNAS The AM antenna is built in, so adjusting the position of the unit may improve AM reception. The FM telescopic antenna on the back of the unit can be extended and rotated for better FM reception. GENERAL CONTROLS FUNCTION Switch – Move the switch to select the TUNER, TAPE or CD function. Move the FUNCTION switch to TAPE OFF position with no cassette buttons pressed, to turn the unit off. VOLUME knob – Turn the volume knob to increase or decrease the volume. USING THE RADIO TUNING TO A RADIO STATION 1. Move the FUNCTION switch to TUNER to turn the radio on. 2. Set the BAND switch to FM or AM. 3. Tune to a desired station by turning the TUNING wheel knob. 4. To turn off the radio, move the FUNCTION switch to TAPE OFF. BEAT CUT SWITCH The BEAT CUT switch is also used for changing the FM reception mode. • Recording an AM station When recording an AM broadcast, beats may occur. If this happens, switch the BEAT CUT switch position to “1” or “2”. • Changing the FM reception mode When an FM stereo broadcast is hard to receive or noisy, switch to “MONO” (monaural). Reception improves. To restore stereo reception, switch to “FM ST”. USING THECASSETTE DECK REC – Press to record from the radio or CD player. PLAY – Press to play a cassette. REW – In stop mode, press to rewind the tape toward the beginning. FF – In stop mode, press to advance the tape toward the end. STOP/EJECT – Press to stop current tape activity, or to open the cassette compartment door when no buttons are active. PAUSE – Press to interrupt tape play or record mode. Press again to resume tape play or tape record mode. PLAYING A CASSETTE TAPE 1. Move the FUNCTION switch to TAPE OFF. 2. Press STOP/EJECT to open the cassette compartment door. 3. Insert a cassette into the compartment with the open edge down and the playback side facing out. 4. Close the door securely. 5. Press REW or FF to move the tape to the desired starting point. 6. Press PLAY to begin playing the tape. Playback continues until the tape reaches the end of the side, then automatically stops. RECORDING ON A CASSETTE TAPE You can record from the radio or the CD player. For best recording, use a normal bias tape. It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. ERASE PROTECTION When you record new material, the cassette deck records over whatever is on the tape. To protect a tape from accidental erasure, break off one or both plastic tabs (one for each tape side) of the cassette. If you decide later to record on the tape, seal the hole with a piece of cellophane tape. WARNING A little bit of slack in your tape can cause scratches on the tape, or worse yet, the tape could break. If you notice some slack in the tape, use a pencil to tighten it up before you insert the tape in the cassette compartm...
Este manual também é adequado para os modelos :Jogadores - RC-ST1RD (412.63 kb)
Jogadores - RC-ST1SL (412.63 kb)