Log:
Assessments - 2, GPA: 4.5 ( )

Instruções de Operação Vitek, Modelo VT-3786

Fabricante : Vitek
Arquivo Tamanho: 1.11 mb
Arquivo Nome : Vitek-VT-3786-Pdf-Rus.Pdf
Língua de Ensino: ruen
Ir para baixar



Facilidade de uso


Only use the ANTI-SHOCK function when necessary to preserve the battery life. • The Anti-shock function will not correct the errors arising from the use of defective scratched or dirty discs. HOLD switch This unit is equipped with a HOLD switch to disable the operating controls. Select HOLD switch (17) to "ON". CONNECTING TO HOME STEREO SYSTEMS The line out jack is made to accept a stereo mini plug (3.5 mm). By using a commercially available audio line cable, simply connect the cable's mini plug to line out jack on your player, and the other appropriate end to CD/AUX input(s) of your home stereo system. Note: Always switch the power off before making any connections between the player and any other set. Note: The volume control or the player become inoperable when the line out jack is used. Adjustments are made on your audio system. CLEANING CLEANING THE PICKUP LENS A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. Open the CD door and clean the lens as follows: • FINGERPRINTS ON LENS Use a cotton swab starting in the middle and working to the outside edge, pay attention in doing this operation or the pick up lens could be damaged. 7 ENGLISH CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak solution of soap water, and then wipe clean. HANDLING COMPACT DISCS 1. This unit is designed to play compact discs bearing the identification logo to the right. Discs that do not carry this logo may not conform to the CD standard and may not play properly. digitalaudid 2. Dirty, scratched or warped discs may cause skipping or noise. Pay attention to the following: Handle the disc only by the edges. To keep the disc clean, do not touch the surface of the disc. 3. Discs should be returned to their cases after use to avoid serious scratches that could cause the laser pickup to skip. 4. Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Prolonged exposure to high temperatures can warp the disc. 5. Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the inks used in some felt-tip pens, may damage the surfaces of the disc. 6. Always place the compact disc to be played in the CD compartment with the label facing upward. CD can be played on only one side. CLEANING DISCS 1. Fingerprints should be wiped from the surface of the disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with cloth should remove most of the particles. Wipe in a straight motion from the inside to the outside of the disc. 2. Never use such chemicals as record cleaning sprays, anti-static sprays, benzene or thinner to clean compact disc. Such chemicals can damage the plastic of the disc. • The unit will not play a disc that has been inserted upside down, or discs that do not conform to the Compact Disc standard. Also, the unit might not play discs that are scratched, soiled or carry fingerprints. • Both 8 cm and 12 cm discs can be played in this unit. r COMPACT glo§gb ENGLISH TROUBLE SHOOTING GUIDE SYMPTOM CAUSE SOLUTION CD Player will not turn on. Dead or weak batteries. Replace both batteries. The AC adaptor not connected property. Check the AC adaptor connection at AC outlet and side of set. Disc will not play. Disc inserted incorrectly Re-insert disc with label side facing up. Defective or wrong type compact disc. Try another audio compact disc. CD door not closed. Close lid securely (push down left comer of door) Moisture has condensed inside the CD deck. Take out the CD and leave the CD door open for about an hour to dry the moisture condensation. No sound from headphones/ Earphones Headphone/Earphone plug not inserted properly. Re-insert headphone/Earphone plug into the headphone jack (marked phones). Headphone/Earphone plugged into the line out jack. Plug headphone/Earphone into the headphone jack (not the line out jack). The volume control set to minimum Increase the volume. Weak batteries. Replace with fresh batteries or use the AC adaptor. Defective compact disc. Try another compact disc. Sound is skipping The compact disc or lens is dirty. Clean or replace the compact disc or clean the lens with a camera brush or blower. Too much movement of the CD player. Reduce movement of CD player. Sound in distorted Music is too loud. Decrease the volume control level. Weak batteries. Batteries are getting weak, replace both batteries or use the AC adaptor. Bass boost is on and music is too loud. Lower volume control or slide bass boost switch to off. Tracks do not change or set does not play normally Batteries are too weak and the battery symbol will show in display Replace both batteries with fresh alkaline batteries, or use a AC Adaptor. Buttons do not work Electronic or static error caused circuitr...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias