Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
Power turning-off . 16.Battery charging indicator 6. PLAY/PAUSE button. Power 17.HOLD switch (blocking of control turning-on buttons) 7. LED display 18.Accumulator batteries 8. Open CD Compartment button compartment 9. Power adapter jack 19.Remote control jack 10.Line output jack Vt-3787.qxd 20.12.2004 17:17 ^page 3 POWER SUPPLY Power Supply from the Adapter 1. Insert the power adapter plug into the power adapter jack (9) 2. Connect the adapter to the power supply. Note: • When the player is working from batteries and the adapter becomes connected, the power supply will automatically be switched to the adapter. • Use only the adapter included with the player. Other models of power adapters can damage the player. • Before connecting make sure that the adapter operating voltage corresponds to the voltage of the local power supply. • When not using the player, disconnect the adapter from the power supply. • Do not touch the adapter with wet hands. Supply from Batteries 1. Disconnect the network adapter from the power supply outlet. 2. Open the battery compartment (18). 3. Insert two Ni-MH batteries (1.2V 1200mA, rectangular type), observing their polarity. 4. Close the battery compartment (18). Charging the Batteries 1. Connect the network adapter to the power supply outlet. 2. Put the charging switch (15) to the "ON" position to start charging. The red charging indicator (16) will light up, showing the beginning of charging process. 3. After 15 hours disconnect the power adapter from the power supply . 3 Vt-3787.qxd 20.12.2004 17:17 £4 ENGLISH Attention: • Do not use (Ni-MH) and normal (alkaline) batteries simultaneously. • Do not charge batteries for more than 24 hours, it can damage them. Note: • If the batteries are being charged for the first time, the charging process will take about 15 hours. • If the batteries' operating time has significantly decreased, it is necessary to obtain new batteries. EXTERNAL CONNECTIONS Connection to Audio system Connect a stereo cable (not included with the player) to the line output (10) of the player and to the line input of the audio system (CD or AUX). Note: Always disconnect CD player power supply before connecting it to audio system. • If CD player creates interference with TV or radio, place it away from radio sets and TV. HEADPHONES AND REMOTE CONTROL Connect the stereo headphones (included with the player) to the headphones jack (11) on the remote control, then connect the remote control plug to the remote control jack (19). CD / MP3 PLAYBACK Reduce the volume before connecting headphones to the player. 1. Connect the headphones included with the player to the headphones jack (11). 2. Press the Open CD Compartment button (8). 3. Insert CD or MP3 disc with the label facing up. 4 -e- Vt-3787.qxd 20.12.2004 17:17 £p^e 5 ENGLISH 4. Close the CD compartment. 5. Press PLAY / PAUSE button (6) to start playback. 6. Set the volume control (12) into the needed position. 7. Turn on the BASS BOOST function if you wish. 8. To pause the playback, press PLAYBACK / PAUSE button (6). • The display will show the track playback time. • Once again press PLAYBACK / PAUSE button (6) to resume the playback. 9. To stop playback, press STOP button (5), the player will automatically be switched off in 60 seconds. CD Disc Total number of tracks and the CD playback time are displayed on the LED-display. During playback, the current track number and its playback time are displayed. MP3 Disc Total number of albums and tracks are displayed on the LED-display. During ^ XT" the playback, the current track number, the performer name and the album name are displayed. Note: Playback of 8 and 12 sm discs is possible. The CD compartment must contain only one of these discs. CD / MP3 Discs Playback 1. Set the desired volume level. 2. To pause the playback, press PLAYBACK / PAUSE button (6). The playback time of the track will flash on the display. To resume the playback, press PLAYBACK / PAUSE button (6) once again. 3. To stop playback, press STOP button (5). 4. To turn off the player, press the STOP button (5) twice. Note: • If during playback, the CD door opens accidentally, the message "OPEN" will show on the display. • Wait for the disc to stop fully before pressing the Open CD Compartment button (8). • The device can play 8 cm discs without using a special adapter. Additional Information • If CD - RW or CD - R disc is written with errors, the message "NO DISC" 5 -e- Vt-3787.qxd 20.12.2004 17:17 £ page 6 ENGLISH will show on the display. When recording audio CD, use the FINALIZE function. Playback will be stopped, if you open the CD lid. When reading CD, message "ESP" is flashing on the LED-display. After inactivity, the player will automatically turn off in 60 seconds, and all settings will be lost. & CHOOSING a CD TRACK 1. Press SKIP/SEARCH BW / TUNING DOWN button (4) to return to the track beginning. 2. Pre...