Assessments - 2, GPA: 5 ( )

Fabricante : Empire Comfort Systems Arquivo Tamanho: 218.49 kb Arquivo Nome : Língua de Ensino:

The flame should show a greenish blue inner cone with a slight yellow tip. If necessary, you can make an adjustment by turning the hood of the LEG valve in a counterclockwise direction until the flame performance is satisfactory. See other side for further instructions regarding valve setting. DO not tamper with or attempt repairs on the burners, frames valves, or LP cylinder. Allow only qualified LP Gas Dealers to make repairs and adjustments. Always close LP cylinder valve after use. Always use and store bottle in an upright position. Never store or transport these cylinders in an occupied enclosure. Adjustment Instructions-Universal Gas Valve Your portable gas stove is furnished with A.G.A. listed Universal type Gas Valve. This valve is designed for use with (Liquefied Petroleum LPG), Natural or Manufactured Gas. When gas plate is installed the valve should be set for the kind of gas to be used. The universal valve is adjusted for the various gases by turning the ADJUSTING HOOD. To turn HOOD use wrench on HOOD SHOULDER. This may be done after gas stove is assembled as HOOD SHOULDER is easily accessible. 1. This valve is shipped from the factory adjusted for LP gas. If LP gas is to be used, no adjustments should be necessary. Orifice HOOD can be open slightly to get desired flame. 2. For use with Natural or Manufactured gas open HOOD until the proper amount of gas is fed to each burner. When properly adjusted the flame should have greenish blue inner cones about one-half inch long. An unnecessary high flame is wasteful and inefficient. 3. The air shutter for each burner should be adjusted so the flame burns clean without blowing. After you obtain the correct setting or the air ADJUSTING PIN ADJUSTING HOOD ADJUSTING HOOD DUST COVER STEM VALVE BODY CAUTION: Orifice HOODS must again be turned down, if the gas stove is to be used on LP gas after it has once been adjusted for other gases. GAS ENTRANCE HOLE IN. ADJUSTING PIN SHOULDER UNDER NO CIRCUMSTANCES SHOULD ANY ALTERATIONS BE MADE TO THE GAS VALVE AND BURNER ASSEMBLY. Warranty Empire Comfort Systems, Inc. makes no claim of fitness of this product for a particular purpose or use and assumes no liability for damages resulting from the use of the product. Liability of t he manufacturer in any event is limited to the amount of the original purchase price of this product. This warranty applies only to the use of the product in accordance with the manufacturer's operating instructions, and remains in force only so long as the product remains in its original configuration. This warranty does not apply to products that have been altered or repaired by outside agents, abused, damaged through neglect, misuse, or accident, or to products that have been used in any way other than in accordance with manufacturer's operating instructions. There are no other warranties, expressed or implied, pertaining to this product or any other product sold by us. Empire Comfort Systems, Inc. neither assumes any responsibi...

Baixe o seu

Para fazer o download, introduza 2 dígitos :