Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Installation safety
•
Installation of this range must conform with local codes or, in the absence of
local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest
edition. In Canada, installation must conform with the current Natural Gas
WARNING
Impor
Installation Code, CAN/CGA-B149.1, or the current Propane Installation Code,
To reduce the risk of fire, electric shock, personal injuries, and/or death, observe
CAN/CGA-B149.2, and with local codes where applicable. This range has been
the following precautions.
t
ant saf
design-certified by ETL according to ANSI Z21.1, latest edition, and Canadian
•
Have your range installed and properly
Gas Association according to CAN/CGA-1.1, latest edition.
grounded by a qualified installer, in
e
accordance with the installation instructions.
Location safety
ty inf
Any adjustment and service should be
ormation
performed only by qualified gas range
WARNING
installers or service technicians.
To reduce the risk of fire, electric shock, personal injuries, and/or death, observe
the following precautions.
•
Do not attempt to service, modify, or replace your range or any part of your
•
This range is for indoor, household use only.
range unless it is specifically recommended in this manual. All other service
Do not install the range in areas exposed to
should be referred to a qualified technician.
the weather and/or water.
•
Always use new flexible connectors when installing a gas appliance. Do not
•
Do not install the range in a place which is
use old flexible connectors.
exposed to a strong draft.
•
Make sure the anti-tip device is properly installed on the range. See the
•
Select a level, well-constructed floor that
installation instructions for more information.
can support the range’s weight. Synthetic
•
Due to the size and weight of the range, have two or more people move the
flooring, such as linoleum, must withstand
range.
180 °F (82 °C) temperatures without
•
Remove all tape and packaging materials.
shrinking, warping, or discoloring. Do not
•
Remove all accessories from the cooktop, oven, and/or lower drawer. Grates
install the range directly over interior kitchen
and griddles are heavy. Use caution when handling them.
carpeting unless a sheet of ¼ inch plywood
•
Make sure no parts came loose during shipping. Do not install in an area
or a similar insulator is placed between the
exposed to dripping water or outside weather conditions.
range and carpeting.
•
Make sure your range is correctly installed and adjusted by a qualified service
•
Select a location where a grounded, 3-prong outlet is easily accessible.
technician or installer for the type of gas (natural or LP) you will use. For
•
If the range is located near a window, do not hang long curtains or paper
your range to utilize LP gas, the installer must replace the 5 surface burner
blinds on that window.
orifices and 2 oven orifices with the provided LP orifice set, and reverse
•
For the range to ventilate properly, make sure the range’s vents are not
the GPR adapter. These adjustments must be made by a qualified service
blocked, and that there is enough clearance at the top, back, sides, and
technician in accordance with the manufacturer’s instructions and all codes
underneath the range. The vents allow the necessary exhaust for the range to
and requirements of the authority having jurisdiction. The qualified agency
operate properly with correct combustion.
performing this work assumes the gas conversion responsibility.
English 9
...