Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
SET DAILY ALARM 1. Press SELECT to navigate to the Clock Area. will show next to the Area. BAR988HGA English R5 15 9/18/04, 3:00 AM EN 2. Press ALARM / to view the alarm. (AL will show at the top.) 3. Press and hold ALARM / for 2 seconds. 4. Select the hour and minute. Press UP or DOWN to change settings. 5. Press ALARM / to confirm. 6. The Daily Alarm icon will appear when the alarm is set. SET PRE-ALARM The Pre-Alarm can be set to sound 15, 30, 45, or 60 minutes before the Daily Alarm. It will sound whenever the recorded temperature from Channel 1 Sensor falls to 35.6°F (2°C) or below. For example, if you set the alarm to 7:00 AM, and the Pre-Alarm to 45 minutes, the Pre-Alarm will sound at 6:15 AM provided the outdoor temperature at Channel 1 Sensor is 35.6°F (2°C) or below. 1. Set up and activate the Daily Alarm. 2. Press ALARM / to switch to Pre-Alarm view. (PRE-AL will show at the top.) 3. Press and hold ALARM / for 2 seconds. 4. Press UP or DOWN to select 15, 30, 45 or 60 minutes. This is the amount of time the Pre-Alarm will sound BEFORE the Daily Alarm. The Pre-Alarm is automatically activated when you select a time. 16 5. Press ALARM / to confirm. shows when the Pre-Alarm is set. NOTE The Daily Alarm will NOT function until the next day if the Pre-Alarm has been triggered. Also, if you deactivate the Daily Alarm, the Pre-Alarm is automatically deactivated. ACTIVATE ALARM Navigate to the Clock Area, then press ALARM / to switch to Daily Alarm or Pre-Alarm view. To activate or deactivate the alarm, press UP or DOWN. When the alarm time is reached, the backlight will be on for 8 seconds and crescendo alarm will sound for 2 minutes. Press any key (except snooze) to silence the alarm. It will sound at the same time the next day. SNOOZE Press SNOOZE / LIGHT to temporarily disable the alarm for 8 minutes. or will blink while snooze is on. BAROMETER This product tracks fluctuations in barometric pressure to provide the weather forecast, and the current and past 24 hours barometric pressure history measurements are recorded by the main (indoor) unit. BAR988HGA English R5 16 9/18/04, 3:00 AM EN VIEW BAROMETER AREA Press SELECT to navigate to the Barometer Area. If is NOT shown, press MODE. Barometric data is shown in 2 areas at the bottom of the display. The upper area shows a 24-hour bar chart. The lower area shows current and historical readings. the current hour (0) to 24 hours prior (-24). BAR CHART DISPLAY The bar chart visually shows atmospheric changes from SET ALTITUDE Set the altitude to match how far above or below sea level you are living. This ensures that the barometric pressure readings are accurate. 1. Navigate to the Barometer Area. 2. Press and hold HISTORY for 2 seconds. SELECT MEASUREMENT UNIT Slide the mb / inHg switch (in the clock battery compartment), to change the display unit. VIEW BAROMETER HISTORY Navigate to the Barometer Area. Then press HISTORY repeatedly to scroll through the measurements. The number shown in the HR box indicates how long ago each measurement was taken (e.g. 2 hours ago, 3 hours ago, etc.). 17 BAR988HGA English R5 17 9/18/04, 3:00 AM EN 3. Press UP or DOWN to set the altitude in 33-foot increments (-328 ft to 8202 ft). 4. Press HISTORY to confirm. WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 19-31 mile (30-50 km) radius. The forecast is based on barometric pressure trend readings. The top area shows an animated icon indicating the forecasted weather. WEATHER FORECAST ICONS ICON DESCRIPTION Day / Night Clear Day / Night Partly cloudy ICON DESCRIPTION Cloudy Rainy Snowy NOTE The night time icon displays from 6 PM to 6 AM. When the Channel 1 Sensor records a temperature of 35.6°F (2°C) or lower, the RAINY icon becomes SNOWY. UV MEASUREMENT - OPTIONAL SENSOR The UVR138A Ultra-Violet Radiation Sensor is included with the BAR986HGA and is available as an optional item for the BAR988HGA. The UV sensor gives you the following information at your fingertips: • 10-hour Ultra-Violet Index (UVI) record. • Automatic calculation of acceptable UV exposure times based on pre-set user profiles (4 users maximum). • UVI Danger Alert when UV Index reaches unsafe levels. 18 BAR988HGA English R5 18 9/18/04, 3:00 AM 19 UV data is shown in the same area as the Barometer. Press SELECT to navigate to the Barometer Area, then press MODE to display the UV icon and data. Refer to the UVR138A User Manual for more information and see below to learn about the new additional UV features. NEW ADDITIONAL UV FEATURES UV EXPOSURE TIME COUNTDOWN To set the exposure time countdown you need set to the Skin Type and Sun Protection Factor (SPF) as follows: 1. Press SELECT to navigate to the Barometer Area, then press MODE to select the UV display. NOTE 2. Press CHANNEL to select user 1-4. 3. Press and hold MODE for 2 seconds to enter the Skin Type Setting Mode of the selected user. 4. Press UP or DOWN to choose 1 of the 4 skin type settings. Then press MODE to co...
Este manual também é adequado para os modelos :Estação Meteorológica - TREVISO SLEEK BAR986HGA (2.05 mb)