Assessments - 6, GPA: 4.3
(
)
)
|
Fotos e especificações Oregon Scientific EW93 |
Facilidade de uso
When used for the first time (after inserting batteries or pressing “RESET” key), the clock will start to search for the atomic clock signal and the signal reception icon will flash for 5 minutes. SIGNAL RECEPTION INDICATOR The wave segment flashing means time signals are being received. The signal quality could be classified into 3 types: Note 1. The unit will automatically search for the time signal at 2:00am (3:00am or 4:00am is also available if the signal is not received at 2:00am), 8:00am, 2:00pm, and 20:00 each day. 2. Always place the unit away from electrical devices such as televisions, computers, telephones, etc. 3. Avoid placing the unit on or next to metal plates. 4. If possible, place the unit next to a window. Signal reception is greatly decreased when located in closed areas like basements or metal buildings. 5. Do not start reception in moving vehicles or trains. TIME AND CALENDAR MANUAL SETTING If you are out of reach of the Radio Controlled sensor or if the reception is not reachable, the time and calendar can be set manually. As soon as the signal of sensor is received again, the clock will automatically synchronize with the exact time and calendar. 1. In normal time mode, press “SET CLOCK” key once to enter the time setting mode. 2. Press “+/CHANNEL” or “-/MIN.MAX.” key to change the settings. 3. Press “SET CLOCK” to confirm. The setting order is: 12/24-hr format, time, time zone offset, year, day/month format, date. 4. Press “SET CLOCK” key to save and exit the setting mode. Note 1. During the setting period, press and hold “+/ CHANNEL” or “-/MIN.MAX.” key to speed up the change of settings. 2. The time zone indicators are abbreviated as below: P=Pacific, M=Mountain, C=Central, E=Eastern. No signal Weak signal Excellent signal 12/24 Hr setting Time setting Time zone setting Month-Date setting MD/DM setting Year setting Weather Station with Radio-Controlled Alarm Clock and Ice Alert Model: EW93 USER MANUAL Thank you for your purchase of this Weather Station. Please read these instructions carefully and keep the manual well for future reference. The receiver unit has a clear and easy-to-read display that shows the indoor temperature, time, the maximum & minimum temperature records in the past 24 hours, the weather forecast icon as well as the outdoor temperature measured and transmitted from the remote sensors. It is able to receive and display readings from up to 3 remote sensors. The 433 MHz technology means no wire installation is required and you can place the sensors within 30m (100ft) from the main (indoor) unit. This product is designed to synchronize its date and time automatically once it is within range of the WWVB-60 signal from the atomic clock in Fort Collins, Colorado. ALARM TIME SETTING 1. In normal time mode, press “SET ALARM” key once to enter the alarm time setting mode. 2. Press “+/CHANNEL” or “-/MIN.MAX.” key to set hour/minute. 3. Press “SET ALARM” key to save and exit the setting mode. “ ” indicates alarm is ON. Note 1. The alarm will be automatically turned on when you set the alarm time. 2. During the alarm time setting period, press and hold “+/CHANNEL” or “-/MIN.MAX.” key to speed up the change of settings. USING ALARM FUNCTION 1. Follow the directions above to set the alarm time. 2. In normal time mode, press “ALARM ON/OFF” key once to display the current alarm time. 3. Press it again to turn alarm ON/OFF. TO SILENCE THE ALARM 1. Press “SNOOZE/LIGHT” to silence the alarm for 8 minutes. The “ ” will be flashing. 2. Press any other key to turn the alarm off and activate it again after 24 hours. 3. If no key is pressed within 120 seconds, the alarm will be turned off and be activated again after 24 hours. READING INDOOR AND OUTDOOR TEMPERATURE RECORDS Slide “.C/.F” switch to select between Celsius and Fahrenheit. Note 1. If no signals are received or the transmission is interfered, “--” will appear on the display. 2. Replace the batteries if the batteries are low, relocate the sensor or main display unit away from electronic devices, or hit the reset buttons on the main display unit and sensor. VIEWING THE MINIMUM AND MAXIMUM TEMPERATURE RECORDS 1. In normal mode, press “-/MIN.MAX.” key twice to show the minimum indoor & outdoor temperature records in the past 24 hours. 2. Press it again to show the maximum temperature records. 3. Press it again to exit. Note Press and hold it for 3 seconds to delete the minimum and maximum temperature records. WEATHER FORECAST INDICATOR This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius with a 75% accuracy. USING ICE ALERT FUNCTION If the outdoor temperature range is -2.0.C ~ 3.0.C (28.4.F ~ 37.4.F), the ice alert indicator light will be turned on and flash. BATTERY REPLACEMENT If the low battery icon turns on next to the outdoor temperature reading, replace the sensor’s battery with 2 AAA batteries. If the low battery icon turns on next to the indoor MAX.temperature records MIN.temper...