3. Press the Fast-forward button to start playback of the next track in the queue. Browsing the list of tracks currently queued 1. Press the Queue button, the currently playing track name will be displayed. 2. Press the Tuning+/- buttons to see which tracks are queued up for playback. If you want to jump to a particular track in the queue, press the Select button when the required track is displayed. Playback will then continue from the beginning of that track. Clearing the media player queue 1. Under the main menu (if needed, press the Back button), press the Tuning+/- button until “” is shown. And then press the Select button. 2. Press the Tuning+/- buttons until “” is displayed. 3. Press the Select button and the display will then show “Queue cleared” and all tracks will be erased from the media queue. Playing tracks in the queue repeatedly 1. When the radio is playing, press the Back button to go back to the main Mode menu. 2. Press the Tuning+/- buttons until “Media Player” is shown display then press the Select button to enter the Media 3. Press the Tuning+/- buttons until “Playback Mode” is displayed then press the Select button. 4. Press the Tuning+/- buttons until “Repeat” is shown. Press the Select button. The display will show “Enable” with a YES/NO option. 5. Press the Tuning+/- buttons to select ‘YES’, then press the Select button to confirm that Repeat mode should be enabled. If you do not wish to enable Repeat mode select ‘NO’. If Repeat mode has previously been enabled, then the display will show ‘Disable’ with a YES/NO option after step 4. Select ‘YES’ to cancel Repeat mode. Playing tracks in random (Shuffle) order 1. When the radio is playing, press the Back button to go back to the main Mode menu. 2. Press the Tuning+/- buttons until “Media Player” is shown display then press the Select button to enter the Media 3. Press the Tuning+/- buttons until “Playback Mode” is displayed then press the Select button. 4. Press the Tuning+/- buttons until “Shuffle” is shown. Press the Select button. The display will show “Enable” with a YES/NO option. 5. Press the Tuning+/- buttons to select ‘YES’, then press the Select button to confirm that Shuffle mode should be enabled. If you do not wish to enable Shuffle mode select ‘NO’. If Shuffle mode has previously been enabled, then the display will show ‘Disable’ with a YES/NO option after step 4. Select ‘YES’ to cancel Shuffle mode. 28 GB FM Radio To listen to the FM radio 1. Turn on the radio by press the Power button. 2. Press the Band button until the display shows . To change FM stations 1. Press the Tuning+/- buttons to change the frequency. 2. Long press the Tuning+/- buttons to search for the next available radio station. FM RDS The Radio Data System (RDS) is a system in which inaudible digital information in addition to the normal FM radio program is transmitted. Also the RDS radio station corrects the real time when it provides this service. The information display is only available when the station provides R.D.S. service. Press the REPLY/RDS button, to cycle through the various modes, and wait for 2 seconds to see the information. The information in the various modes are 1. Frequency: Displays frequency of the station. 2. Program Service: Displays name of station. 3. Radio Text : Displays ratio text messages such as news items etc. 4. Program Type: Displays the program type. Storing a FM radio station in a preset There are 5 memory presets available. 1. Select the required station as previously described. 2. When the radio is playing, press and hold 1 of the 5 preset buttons that you wish you store. The station will be stored under this chosen preset. 3. Repeat this procedure for any other preset memories that you wish to configure. Recalling an preset Internet radio station When the radio is playing, press 1 of the 5 preset buttons that you wish to recall. The radio will connect to the station stored in preset memory. Note: If you have not previously stored a radio station in the selected preset, your current radio station will continue to play. Auxiliary input socket Your radio has a 3.5mm stereo jack socket for connection to external audio sources. This can be configured to two sensitivity levels to suit the output level of the connected device. 1. Connect an external audio source, such as an MP3 or CD player to the Aux In socket on the back of the radio. 2. Turn on the radio and press the Band button on the front of the radio until the display shows . 3. Now the radio will play the external audio sources. Clock Setting Setting the clock time 1. Long press Tine Set button until “Set Time/the display. (If it is not on the display, press Tuning+/- “Set Time/Date ” is shown). 2. Press Select button and then press Tuning+/- buttons to set the hour. 3. Press Select button and then press Tuning+/- buttons to set the minute. 4. Press Select button and then press Tuning+/- buttons to set the date, mont...
)
