Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
In this package you will find: One Five-Channel Remote Thermo-hygrometer (transmitter) (TS34C) One User Manual Standard Package Contents Picture Components Thermo Hygrometer Sensor Installation All data measured by this remote sensor is transmitted to the main unit wirelessly, with the operating range up to 328 feet (100 meters) in the open area. Remote thermo-hygrometers (temperature & humidity sensors) can be placed indoors or outdoors, depending on the area where the temperature and humidity are intended to be measured. If you intend measuring outdoor temperature and humidity, place the remote sensor outdoors. Note: It is critical to power up and test communication between the remote sensor and the main unit BEFORE permanently mounting them outside. Before you begin • We recommend using alkaline batteries for the remote thermo-hygrometer when temperatures are above 32°F (0°C) and lithium batteries when temperatures are below 32°F (0°C). • Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements). • Insert batteries before first use, matching the polarity in the battery compartment • Remove protective plastic screen from LCD display (if any). • During an initial setup, place the main unit close to the remote sensor. • After reception is established (the remote readings will appear on the main unit’s display), position the remote sensor and the main unit within the effective 3 transmission range of up to 328 feet (100 meters). Ideally they should be placed within the line of sight of the main unit. • Transmission range may be affected by trees, metal structures and electronic appliances. • The effective operating range may be influenced by the surrounding building materials and how the receiver (main unit) and transmitters (weather sensors) are positioned. • Place the remote thermo-hygrometer so that it faces the main unit (receiver), minimizing obstructions such as doors, walls and furniture. Note: When the temperature falls below freezing, the batteries in the outdoor remote thermo-hygrometers may have reduced voltage supply and a shorter effective range. We recommend using lithium batteries at temperatures of 32°F (0°C) and below. Features • LCD display of measured temperature and humidity • Five (5) transmission channels selection • Case can be wall mounted using built-in hanger A. LED INDICATOR • Flashes once when the remote sensor transmits a reading to the main unit. • Flashes twice when battery power is low. B. BATTERY COMPARTMENT Holds two AA-size batteries C. RESET Resets all readings D. CHANNEL SWITCH Selects the desired channel from 1 to 5 E. WALL-MOUNT RECESSED OPENING Keeps the remote sensor on the wall Note: Install the batteries and select the channel before mounting the sensor. 4 Battery installation • Remove the screws from the battery compartment with a small Phillips screwdriver. • Set the channel 1 through 5. The switch is located in the battery compartment. Channel 1 is typically selected if only one remote thermo-hygrometer is being used. • Install 2 “AA” size alkaline batteries (not included) matching the polarities shown in the battery compartment. • Replace the battery compartment door and secure the screws. • Secure the remote thermo-hygrometer in the desired location. Mounting • The remote thermo-hygrometer can be placed on the flat surface or mounted on the wall in vertical position • Use the wall mount hardware and screws provided when mounting the remote thermo-hygrometer on the wall Placement tips: • The remote thermo-hygrometer should be placed in the area with a free air circulation and sheltered from the direct sunlight and an extreme weather conditions. • Ideally, place the remote thermo-hygrometer above the natural surfaces (such as a grassy lawn). • Avoid placing the remote thermo-hygrometer near sources of heat such as chimneys and heating elements. • Avoid any areas collecting and radiating a heat from the sun, such as metal, brick or concrete structures, paving, patios and decks. • The international standard for the valid air temperature measurements is 4 feet (1.25meters) above the ground. Note: To display the readings from the remote thermo-hygrometer you must own the main display unit of the Honeywell Professional Weather Station TE923W, model number TE923WD. Additionally it will work with all other Honeywell weather station models. Troubleshooting Q: “The remote sensor display shows dashes “---” A: Press RESET opening with a paper clip or similar tool. If this does not work, check the batteries and replace them. Q: “Main unit display in temperature and humidity portion shows dashes “---“ 5 A: The display will show “- - -” when the wireless connection with the remote thermo-hygrometer is lost for 15 minutes Check or replace the batteries in remote sensor. Then press and hold DOWN button on the main unit to enforce a search for the remote signals. If this does not work, check the wireless transmission path from the rem...