Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
• Check water hardness. For extremely hardwater, it may be necessary to install a water softener. (See Detergent Chart.) • Use fresh detergent. • Check to make sure funnel in top rack is notblocked. • Make sure items are not blocking the spray arms, preventing them from rotating. Dishes not Dry • Select heat dry option. • Make sure the rinse aid dispenser is filled. • Increase the amount of rinse aid. (See Rinse Aid.) • Check the incoming water temperature. Besure it is at least 120°F (49°C). • Check for proper loading—avoid nesting items. • Plastic items may need to be towel dried. • Cups with a concave bottom will collect water. Glassware/Flatware Spotted or Cloudy • Check water hardness. For extremely hard water, it may be necessary to install a watersoftener. (See Detergent Chart.) • Water temperature may be low. Avoidextremely low or high temperatures. (See Factors Affecting Performance.) • Avoid overloading and improper loading. (See Preparing and Loading Dishes.) • Use fresh detergent. Old detergent is ineffective. • Make sure rinse aid dispenser is filled. • Check to see that proper amount ofdetergent is being used for cycle selected. Also, check phosphate level. (SeeDetergent Dispenser.) • Home water pressure may be too low—it should be 20 to 120 pounds per squareinch (psi). Dishware Chipped • Load with care and do not overload. (SeePreparing and Loading Dishes.) • Place delicate items in top rack. • Place glasses securely against pins andnot over pins. • Load items so they are secure and don’t jarloose when moving racks in and out. Move racks in and out slowly. • Make sure tall glasses and stemware willclear top of tub when rack is pushed in. • Fine antique china and crystal should be hand-washed. 12 Solutions to Common Dishwashing Problems (continued) Dishware Stained or Discolored • Tea and coffee can stain cups. Remove thestains by hand washing in a solution of 1/2 cup (120 ml) bleach and one quart (1 L) ofwarm water. Rinse thoroughly. • Iron deposits in water can cause a yellow orbrown film. A special filter installed in the water supply line will correct this problem. (See Removing Spots and Film.) • Aluminum utensils can leave gray/black marks when they rub against other items. Load properly. • Certain high acid foods can causediscoloration of stainless steel and plastics if allowed to sit for a long period. Use theRinse/Hold cycle or rinse by hand if notoperating dishwasher at once. • Mixing stainless steel and silver utensils insilverware basket can cause pitting of thestainless steel blades. Avoid mixing stainless steel and silver. Etching • Using too much detergent in soft or softenedwater causes this film that cannot be removed. • Adjust the amount of detergent based on thewater hardness. (Check Detergent Chart.) • Lower the water temperature. • Use the Heat Dry Off option. Detergent Left in Cups • Detergent may be old. Discard and use freshdetergent. • Be sure water action can reach the dispenser. • Check to see if cycle has been completed. • Make sure items do not prevent the detergentdispenser from opening. Dishwasher Leaks • Use only fresh detergent designed forautomatic dishwashers. Measure detergent carefully. Try a different brand. • Spilled rinse aid can cause foam and lead tooverflowing. Wipe up any spills with a dampcloth. • Check to see that dishwasher is level. (SeeInstallation Instructions.) Normal Sounds You Will Hear • Normal sounds include water fill, water circulation and motor sounds. • There is a noticeable change in sound whenthe wash action switches between the lower and middle spray arm. This is normal since each spray arm has its own sound. • It is normal for dishwasher to pause (nosound) when the wash action is switchingbetween the lower and middle spray arms. Water in Bottom of Tub • Water left in bottom of tub after cycle iscomplete is not normal. If water remains inthe bottom of the tub, dishwasher may not be draining properly. (See Dishwasher DoesNot Drain Properly.) Vapor at Vent • Water vapor escapes from the vent duringthe washing and/or drying part of cycle. This is normal. Dishwasher Won’t Run • Check to see if circuit breaker is tripped or ifa fuse is blown. • Make sure water supply is turned on. • Check to see if cycle is set correctly. (SeeOperating Instructions.) • Is dishwasher set for delay start option? • Make sure door is closed and latched. 13 Solutions to Common Dishwashing Problems (continued) Dishwasher Does Not Drain Properly • If unit is hooked up to a food waste disposer, make sure the disposer is empty. • Check to see if the knockout plug has beenremoved from inside the food waste disposer inlet. • Check to see if drain hose is kinked. • Make sure cycle is complete, not in a pause. Cycle Takes a Long Time • Is cycle in a water heating delay? • Has the delay start option been selected? • Has the sanitize option been selected? Dishwasher Won’t Fill • Is water supply turned on? • Check your home circuit breaker or fuse box. • Check inlet hos...
Este manual também é adequado para os modelos :Máquinas de lavar louça - 800 Series (632.39 kb)
Máquinas de lavar louça - 800 Series (632.39 kb)
Máquinas de lavar louça - 800 Series (632.39 kb)
Máquinas de lavar louça - 800 Series (632.39 kb)