Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
Cycle time will also vary based on the options selected and the incoming water temperature. Note: Not all cycles available on all models. Cycle Chart Cycle To Select Cycle Soil Level Water (approx.) Time* (minutes) Washes/ Rinses For pots, pans, casseroles and dinnerware with dried-on or baked-on soils. Ultimate Scrub Select ULTIMATE SCRUB and desired OPTIONS. HI-TEMP WASH and SANITIZE will automatically be provided. Heavy and Medium gal. imp. gal. liters 9.9 8.2 37.5 127 2 washes 6 rinses Light gal. imp. gal. liters 7.5 6.3 28.5 105 2 washes 4 rinses For regularly soiled dishes and silverware. Normal Wash Select NORMAL WASH and desired OPTIONS. Heavy gal. imp. gal. liters 7.3 6.1 27.6 105 2 washes 4 rinses Medium gal. imp. gal. liters 6.1 5.1 23.1 95 2 washes 3 rinses Light 4.9 4.1 18.5 gal. imp. gal. liters 83 2 washes 2 rinses For lightly soiled and pre-rinsed dishes and silverware. Econo Wash Select ECONO WASH and desired OPTIONS. Heavy gal. imp. gal. liters 6.1 5.1 23.1 94 3 wash 2 rinses Medium and Light gal. imp. gal. liters 4.9 4.1 18.6 83 2 wash 2 rinses Speed Clean A fast wash for regularly soiled dishes and silverware. Select SPEED CLEAN and desired OPTIONS. 5.3 4.4 20.1 gal. imp. gal. liters 50 2 wash 2 rinses For lightly soiled china and crystal. China Crystal Select CHINA CRYSTAL and desired OPTIONS. gal. imp. gal. liters 6.1 5.1 23.1 94 2 wash 3 rinses For lightly soiled or pre-rinsed dishes and silverware when you do not have a full load. Upper Rack Select UPPER RACK and desired OPTIONS. gal. imp. gal. liters 3.7 3.1 14.0 61 2 wash 1 rinses For lightly soiled or pre-rinsed dishes, pots, pans and silverware when you do not have a full load. Lower Rack Select LOWER RACK and desired OPTIONS. gal. imp. gal. liters 3.7 3.1 14.0 64 2 wash 1 rinses For rinsing dishes that will be washed later. Rinse Only Select RINSE ONLY. DO NOT USE detergent. gal. imp. gal. liters 2.4 2.0 9.1 18 2 rinses * Includes dry time. 5 Operating Instructions (continued) Options Selections Favorite Cycle The FAVORITE CYCLE option allows you to program your preferred cycle and options into one button. Once programmed, simply press the FAVORITE CYCLE button followed by the START/CANCEL pad. To program the FAVORITE CYCLE button: 1) Select your preferred cycle and options 2) Hold the FAVORITE CYCLE button for 3 seconds The display will flash for 2 seconds indicating the FAVORITE CYCLE option has been programmed. To change the FAVORITE CYCLE option simple repeat steps one and two above. Turbo Boost The TURBO BOOST option overrides the normal cycle speed and adjusts to the maximum wash speed. This option is recommended when there is a heavy soiled load. TURBO BOOST can be used with ULTIMATE SCRUB, NORMAL WASH, and ECONO WASH cycles. TURBO BOOST may be selected before the wash cycle is started or anytime during the wash cycle. Wash Silencer The WASH SILENCER option overides normal cycle speed and adjusts to the quietest cycle speed. This option can be used with NORMAL WASH, ECONO WASH, UPPER RACK, and LOWER RACK cycles. WASH SILENCER can be selected before the wash cycle is started, or anytime during the wash cycle. Hi-Temp Wash When HI-TEMP WASH option is selected, the dishwasher heats water in the main wash to approximately 140°F (60°C). This increase in water temperature helps dishwasher detergent remove food grease and soil from dishes more effectively and aids in drying. HITEMP WASH option can be used with all cycles except CHINA CRYSTAL (some models) and RINSE ONLY. HI-TEMP WASH is automatically provided when ULTIMATE SCRUB cycle is selected. Sanitize Option To sanitize your dishes and glassware, select the SANITIZE option. When selected, the light above the pad will come on and remain on until end of cycle. The water temperature in the final rinse will be raised to 155°F (68°C) assuring bacteria is destroyed. This option is available in Ultimate Scrub, Normal and Econo cycles. Only these sanitization cycles have been designed to meet NSF requirements. The cycle time will be extended until the proper water temperature is reached.Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120°F (49°C). The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure or if the incoming water temperature is below 120°F (49°C). To turn off the SANITIZE option, press the pad a second time. The light above the pad will turn off. No Heat Dry NO HEAT DRY option saves electricity since the heating element is off during drying portion of cycle. When selected, the light above the pad will come on and remain on until end of cycle. To speed the drying process, open the door slightly after the cycle is complete. Some water droplets may remain on door and tub and in areas where dishes touch silverware basket and rack. To select heated dry, press the pad a second time. The light above the pad will turn off. Heated dry provides faster dryi...