Assessments - 3, GPA: 3.7 ( )

Fabricante : Kenmore Arquivo Tamanho: 752 kb Arquivo Nome : Língua de Ensino:

To fill dispenser: 1. Open dishwasher door completely. 2. Remove rinse aid indicator cap. 3. Add rinse agent r4. Fill only to smallest opening in lower part of dispenser. Overfilling may cause dnse agent to leak out. This will not harm the dishwasher, but could cause oversudsing. 4. Clean up any spilled rinse agent with a damp cloth. 5. Replace rinse aid indicator cap. Keep it closed tightly. NOTES: • Your dishwasher is designed to use a liquid rinse agent. Do not use a solid or bar-type rinse agent. • The rinse agent dispenser holds 6 ounces (175 mL). Under normal conditions, this lasts about 3 months. • You do not have to wait untilthe dispenser isempty before refilling, but do not overfill it. Water temperature tips Hot water dissolves and activates the dishwashing detergent. Hot water also dissolves grease on dishes and helps dry glasses spot-free. For best dishwashing results, water must be at least 120°F (49°C) as it enters the dishwasher. Loads may not wash as well if the water temperature is too low. NOTE: Use the Water Heat option on your dishwasher if you keep your water heater at a low setting. The Timer Knob pauses and the Water Heating status indicator glows while water is heating. For more information, see "Dish washer seems to run too long" in the "Troubleshooting Guide" section. To check water temperature: 1. Run hot water at the faucet closest to your dishwasher for at least 1 minute. 2. Measure the water temperature with a candy or meat__ thermometer placed in the running stream of water Ili]l. 3. If the water temperature at the faucet is below 120°F (49°C), have a qualified person raise the water heater's thermostat setting. Cycles Ou/e_anf Sf_/em ! IC" " "o-=" _ U_rm_ A "/" shows what each cycle includes. Water Cycle Usage Detergent Main Tirne-Igallons[US_/ Dispenser CYCLE Wash Rinse Wash Rinse Dry Imin.I liters} Sections POTS & PANS D /t ,/ ,/t /t ,/ 88tt 9.1/34.4 D Fill 2 Detergent f _ _POTS & PANS cups or dried-on foods. For cleaning dishes, and pots and pans with cooked-on • Water automatically heats to 135°F (57°C) in the wash, main wash, and final rinse. NORMAL WASH D ,/t ,/t ,/ 72tt 6.9/26.1 D Fill 2 Detergent _NO!MAL WASH u/ cups For everyday heavily soiled dishes. (The Energy Guide label is based on this cycle.) • Select the Water Heat option to heat water to 135°F (57°C) in the main wash. • Water automatically heats to 135°F (57°C) in the final rinse, WATER MISER D /t ,/t ,/ 62_ 4.8/18.2 Fill 1 Detergent cup MISER • CHINA • LIGHT For prerinsed and lightly soiled dishes. Saves energy by using less hot water than Normal Wash cycle. • Select the Water Heat option to heat water to 135°F (57°0) in the main wash. • Water automatically heats to 135°F (57°C) in the final rinse. t The Timer Knob willpause while water is being heated. tt Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown. continued on next page Cycles (cont.) Ultre W,esh A "/" shows what each cycle includes. Water Cycle Usage Detergent Main T me-(gallons[U.S]/Dispenser CYCLE Wash Rinse Sections Wash Rinse Dry Imin.I liters) CHINA-LIGHT /t ,/t / 62" 4.8/18.2 D Fill 1 Detergent cup R • CHINA • LIGHT A light wash and gentle dry for china and crystal. If you have not selected No Heat Dry, the heating element cycles on and off during the drying part of the cycle. • Select the Water Heat option to heat water to 135°F (57°C) in the main wash. =Water automatically heats to 135°F 57°C) in the final rinse. QUICK RINSE ,/ 6 2.2/8.3 D Fill O Detergent cups For rinsing dishes that will be washed later. t The Timer Knob will pause while water is being heated. _t Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown. Options Option Water Heat • Automatic with Pots & Pans • Option for Normal Wash, Water Miser, and China-Light cycles • Not available for Quick Rinse cycle No Heat Dry • Option for Pots & Pans, Normal Wash, Water Miser and China-Light cycles Reset Options Delay Wash • Option for Pots & Pans and Normal Wash. • Not available for Quick Rinse, Water Miser, and China-Light cycles When should I use it? To ensure water temperature in Main Wash reaches 135°F (57°C). Use when you do not need a rapid dry cycle. Allow longer drying times (overnight). Use rinse agent to improve drying. To change option selection. Use when you want to start a cycle later. Set delay to run dishwasher during times when off-peak utility rates are in effect or when you are away from home. Local utilities recommend this to avoid heavy usage of energy at certain times of day. What does it do? • When you select Water Heat, main wash delays untilwater heats to 135°F (57°C). • As water heats, washing action continues....

Baixe o seu

Para fazer o download, introduza 2 dígitos :