Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação Bosch, Modelo SCE53M25EU/01

Fabricante : Bosch
Arquivo Tamanho: 1.12 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


– Children or people whose physical, sensory or mental abilities prevent them from using the appliance safely must not use this appliance without supervision or instruction by a responsible person. – Do not lean or sit on the open door. The appliance could tip. – Please note that free-standing appliances may tip over if the baskets are overloaded. – Do not add any solvents to the washing chamber. Danger of explosion! – Open the door carefully when the programme is still running. There is a risk of hot water spraying out of the appliance. – Read and observe the safety information and instructions for use on the packaging for cleaning and rinsing agents. a=Warning Knives and other utensils with sharp points must be placed in the cutlery basket with the points downwards or horizontally on the knife shelf *. * depending on model Children in the household – If fitted, use the childproof lock. An exact description can be found in the back of the envelope. – Do not allow children to play with or operate the appliance. – Keep children away from detergents and rinse aid. These may cause chemical burns in the mouth, throat and eyes or asphyxiation. – Keep children away from open dishwasher. The water in the rinsing compartment is not drinking water and could contain detergent residue. Childproof lock (door lock) * The description of the childproof lock is at the back in the envelope. * depending on model Childproof lock (button lock) You can secure your appliance from being unintentionally the programme terminated (e.g. improper operation by children). Activating the button lock: – Start the required programme. – Hold down the button + for approx. 4 sec. until this ’– is indicated on the digital display. If any button is pressed while the programme is running, this ’– is indicated on the digital display. It is not possible to end (Reset) the programme. Deactivating the button lock: – Hold down the button + for approx. 4 sec. until the display ’– goes out. When the programme ends (‹:‹‹ on the digital display), the button lock is cancelled. If there is a power failure, the button lock is retained. Whenever a programme is restarted, the button lock must be reactivated. Damage – The appliance may be repaired and opened up by a technician only. To do this, disconnect the appliance from the power supply. Pull out the mains plug or switch off the fuse. Turn off the tap. Disposal – Make redundant appliances unusable to prevent subsequent accidents. – Dispose of the appliance in an environmentally friendly manner. a=Warning Children could become locked in the appliance (risk of suffocation) or find themselves in other dangerous situations. Therefore: Pull out the mains plug, sever and dispose of the power cord. Destroy the door lock so that the door can no longer be closed. en Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front. Individual positions are referred to in the text. Control panel ( ON/OFF switch 0 Programme buttons ** 8 Timer programming * @ Additional options ** H START button P Display “Check water supply” X Salt refill indicator ` Rinse aid refill indicator h Digital display * depending on model ** Number depending on model Appliance interior 1" Top basket 1* Top spray arm 12 Bottom spray arm 1: Filters 1B Dispenser for special salt 1J Cutlery basket 1R Bottom basket 1Z Dispenser for rinse aid 1b Detergent dispenser 1j Lock for detergent dispenser 9" Rating plate * depending on model en Water softening system To ensure good washing results, the dishwasher requires soft water, i.e. containing low amounts of lime, otherwise white limescale will be deposited on the utensils and inner container. Tap water above 9° Clarke (from set value •:‹‚) must be softened. The water is softened with salt (regeneration salt) in the water softening system of the dishwasher. The setting and therefore the required amount of salt depends on the degree of hardness of your tap water (see table). Setting The amount of salt dispensed can be set from •:‹‹ to •:‹.. Salt is not required at the set value •:‹‹. – Find out about the hardness value of your tap water. Your water utility company will help you with this. – Set value can be found in the water hardness table. – Close the door. – Switch on ON/OFF switch (. – Hold down programme button # and press START button H until •:‹.... is indicated on the digital display. – Release both buttons. The LED for button # flashes and the digital display h displays the factory setting •:‹…. To change the setting: – Press programme button 3. Each time the button is pressed, the set value increases by one level; when the value of •:‹. has been reached, the display jumps back to •:‹‹ (off). – Press START button H. The chosen setting has now been stored. Water hardness table Water hardness value °Clarke Hardness range mmol/l Set value on the machine •:‹‹ •:‹‚ •:‹. •:‹„ •:‹… •:‹† •:‹‡ •:‹. soft medium hard 08 910 1112 131...

Este manual também é adequado para os modelos :
Máquinas de lavar louça - SCE53M25EU/02 (1.12 mb)
Máquinas de lavar louça - SCE63M15EU/01 (1.12 mb)
Máquinas de lavar louça - SCE63M15EU/02 (1.12 mb)
Máquinas de lavar louça - SCE63M25EU/01 (1.12 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias