Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Each time the button is pressed, the set value increases by one; when the value is reached, the display jumps back to (the salt refill indicator / water softening system has been switched off). Switch off the main switch 1 . The set value is stored within the device. Approx. 4 litres of water are required to regenerate the water softening system. As a result, the water consumption per rinse cycle increases by 0 to maximum 4 litres depending on the water hardness setting. Note If you use the detergent and rinse aid separately or switch from combined detergents to standard cleaning products, ensure that the rinse aid refill indicator has been switched on and the water softening system has been set to the correct water hardness. en Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. Delicate Type of Dishes e.g. porcelain, pans, cutlery, glasses, etc. Type of food remnants e.g. Programme- sequence Dry Clean 55 Clean 40 Prerinse Clean 55 Clean 45 Wash programme Amount of food remnants State of food remnant Intensive 70 Eco 50 Gentle 40 Quick 45 Prerinse Mixed Dry Clean 65 Clean 50 Prerinse Dry Clean 70 Intermediate rinse Clean 70 Prerinse 50 Prerinse Intermediate rinse Intermediate rinse Intermediate rinse Intermediate rinse Intermediate rinse MixedNon- sensitive Dry Clean 70 Intermediate rinse Clean 65 Prerinse Intermediate rinse Normal 65 amount and condition of food remains, with the details contained in the programme overview. You will find the appropriate programme information in the introduction. Soups, souffles, potatoes, pastries, rice, eggs, fried food Soups, potatoes, pastries, rice, eggs, fried food Coffee, cake, milk, sausage, cold drinks, salads Rinse off if the dishes have been stacked for several days in the dishwash er prior to washing. Large Little Very little Very adhesive Lightly Adhesive Programme selection The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the en Washing dishes Reduce costs! If only a small number of dishes have been loaded into the dishwasher, selecting a programme that operates at the next lowest temperature will usually suffice. Programme data The programme specifications can be found in the summary of instructions. Programme specifications refer to normal conditions. Greater deviations may occur due to: different amounts of dishes temperature of mains water supply pressure of mains water supply ambient temperature fluctuations in mains voltage machine-related factors (e.g. temperature, water volume, ...). Energy and water consumption is reduced by up to 1/4 when dishes are washed in the upper basket only. Water consumption values are based on a water hardness setting of 4. Aqua sensor * * on applicable models The Aqua sensor is an optical measuring device which measures the turbidity of the rinsing water. A light barrier can detect dissolved food remnants in the water, e.g. egg, fat and oats. The Aqua sensor is used according to the programme. When the Aqua sensor is active, ”clean” rinsing water may be transferred into the next rinsing bath and/or the temperature adjusted. If the turbidity is greater, the water is drained and is replaced with fresh water. In this way the water consumption is reduced by approx. 4 litres for utensils which are ”less” dirty. Switching the dishwasher ON Turn on the tap. Set main switch 1 to ON. Indicators light up according to the last programme that was selected. This same programme will run again if no other programme button 9 is pressed. For appliances with top basket feature: If only the to...
Este manual também é adequado para os modelos :Máquinas de lavar louça - SGS45M28EU/75 (2.44 mb)
Máquinas de lavar louça - SGS45M28EU/86 (2.44 mb)
Máquinas de lavar louça - SGS45M28EU/90 (2.44 mb)
Máquinas de lavar louça - SGS46M12EE/01 (2.44 mb)