Assessments - 0, GPA: 0 ( )

Fabricante : Bosch Arquivo Tamanho: 2.12 mb Arquivo Nome : Língua de Ensino:

Winterizing your unit Problem Cause Action Dishwasher does not start 1. Door may not be properly latched 1. Shut the door completely until you hear it click. 2. Unit may not be turned on 2. Press the main power switch to turn unit on. 3. Unit not reset or previous cycle not completed 3. To reset, refer to “Cancel a Cycle” (page 12) in this manual. 4. Delay start engaged 4. To reset, refer to “Delay Start” (page 12) section in this manual. 5. Interruption of electrical power supply to dish5. Check circuit breaker washer or blown fuse. 6. Select a cycle and close the door. 6. The door may have been closed without first 7. Check and turn on water supply. selecting a cycle 7. Water supply may not be turned on Dishwasher beep1. Default factory settings alert the customer that 1. To adjust the volume or deactivate, refer to the “Cycle Coming (end of cycle the cycle is complete by beeping. This feature can pletion Signal” (page 12) section in this manual. signal) be deactivated if so desired. Display does not 1. A fuse may have been blown or circuit breaker 1. Check the fuse or circuit breaker box and replace the fuse or illuminate tripped reset the breaker if necessary 2. Door not closed or latched 2. Ensure door is properly latched and completely closed Note: For models with controls on top of the door, the display only illuminate when the door is opened and controls are visible. Dishwasher seems to run a long time 1. Incoming water is not warm enough 2. Cycle time can vary due to soil and water conditions 3. Rinse agent dispenser is empty 4. Dishwasher connected to cold water supply Note: Refer to “Wash Cycle Information” (page 11) section in this manual for typical cycle lengths 1. Before starting a cycle, run hot water faucet at the sink closest to the dishwasher 2. Sensors in the dishwasher automatically increase the cycle time to ensure a good wash when heavy soil is detected 3. Add rinse agent 4. Verify dishwasher is connected to hot water supply plumbing Dishes are not get1. Spray arm movement obstructed 1. Ensure that spray arm movement is not blocked by hand rotatting clean enough 2. Spray arm nozzles clogged 3. Improper use of detergents 4. Filters could be clogged ing spray arms before starting cycle 2. Remove the spray arms and clean according to the “Care and Maintenance” (pages 13-14) section of the manual 5. Dishes are nested or loaded too close together 6. Selected wash cycle is not suitable for food soil conditions 3. Increase or decrease detergent depending on the water hardness (refer to Table 1) 4. Clean the filters according to the “Care and Maintenance” (pages 13-14) section of the manual 5. Rearrange load such that water spray can reach all items in the dishwasher - see “Loading the Dishwasher” (page 5-7) section of the manual 6. Refer to “Wash Cycle Information” (page 11) section of the manual Problem Cause Action Problem Cause Action Dishes are not getting dry enough 1. Rinse agent dispenser is empty 2. Improper loading of dis...

Baixe o seu

Para fazer o download, introduza 2 dígitos :