Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Máquinas de lavar louça - SN56T554EU/15 (1.85 mb)
Facilidade de uso
Auto 65° – 75° all Is optimised according to the soiling with the aid of sensors. A Auto 45° – 65° mixed utensils and cutlery part dried, common household food remnants a / a Eco 50° Prerinse Clean 50° Intermediate rinse Final rinse 65° Dry sensitive utensils, cutlery, temperature- slightly adhesive, fresh food remnants E Auto 35° – 45° Intensive zone Express Wash Half load Extra drying Is optimised according to the soiling with the aid of sensors. sensitive plastic and glasses n / . Quick 45° Extra drying Clean 45° Intermediate rinse Final rinse 55° all cold rinsing, intermediate cleaning u / o Prerinse none Prerinse Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information about comparability tests The conditions for the comparison test are available on request by e-mail from dishwasher@test-appliances.com. Quote the appliance number (ENr.) and the production date (FD) which you can find on the rating plate 9: on the appliance door. en Additional options * depending on model Additional options can be set with the buttons h. YExpress Wash * The >>Express Wash<< function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The change in the running time is indicated on the digital display 8. To obtain optimum cleaning results at a reduced running time, water and energy consumption are increased. §Half load * If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load. ·Hygiene * The temperature is increased during the cleaning process. This increases the hygiene status. This additional option is ideal for cleaning e.g. chopping boards and baby bottles. IIntensive zone * Perfect for a mixed load. You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increased slightly. .Extra drying * An increased temperature during the final rinse and an extended drying phase ensure that even plastic parts dry better. There is a slight increase in the energy consumption. Washing the dishes Programme data The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value •:‹…. Different influencing factors such as e.g. water temperature or line pressure may result in deviations. Aqua sensor * * depending on model The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water. The Aqua sensor is used according to the programme. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 3–6 litres. If the turbidity is greater, the water is drained and is replaced with fresh water. In the automatic programmes the temperature and running time can also be adjusted to the degree of soiling. Switching on the appliance – Turn on the tap fully. – Open the door. – Switch on ON/OFF switch (. The display of the last selected programme flashes. This programme remains selected if no other programme button 0 is pressed. The expected programme duration flashes on the digital display 8. – Press the START button )". – Close the door. The programme starts running. Remaining running time display When the programme is selected, the remaining running time of the programme is indicated on the digital display 8. The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme). en Display window Apart from information on the programme sequence, the display window )2 also indicates additional information on e.g. spray pressure. If you would no longer like to have this additional information displayed, proceed as follows. – Open the door. – Switch on ON/OFF switch (. – Hold down programme button # and press START button )" until the digital display 8 •:‹... is indicated. – Release both buttons. The LED for button # flashes and the digital display 8 displays the factory setting •:‹…. – Press programme button # until the factory set value ’:‹‚ is indicated on the digital display 8. To change the setting, – By pressing the 3 button, you can switch the on board computer (additional programme information) off ’:‹‹ or on ’:‹‚. – Press START button )". The set value is saved. – Close the door. Timer programming You can delay the start of the programme in 1 hour steps up to 24 hours. – Open the door. – Switch on ON/OFF switch (. – Press the button ` + until ‹‚ is flaching in the timer programming display X. – Press + or – button until the ` displayed time corresponds with your requirements. – Press START button )", ti...
Este manual também é adequado para os modelos :Máquinas de lavar louça - SN56T554EU/22 (1.84 mb)
Máquinas de lavar louça - SN56T554EU/23 (1.84 mb)
Máquinas de lavar louça - SN56T554EU/25 (1.84 mb)
Máquinas de lavar louça - SX56T554EU/22 (1.84 mb)