Log:
Assessments - 1, GPA: 5 ( )

Instruções de Operação Bosch, Modelo SN65N038IL/01

Fabricante : Bosch
Arquivo Tamanho: 3.31 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


The corresponding programmes and their arrangement can be found on the fascia. Type of utensils Type of soiling Programme Possible additional options Programme sequence Prerinse pots and pans, non-sensitive utensils and cutlery very adhesive burned- in or dried-on food remnants containing starch or protein ± / ° Intensive 70° A Auto 45° -65° all all Clean 70° Intermediate rinse Final rinse 65° Drying Is optimised according to the soiling with the aid of sensors. A Auto 45° -65° all Is optimised according to the soiling with the aid of sensors. mixed utensils and cutlery part dried, common household food remnants a / a Eco 50° all Prerinse Clean 50° Intermediate rinse Final rinse 65° Drying sensitive utensils, cutlery, temperature- sensitive plastic and glasses slightly adhesive, fresh food remnants e / e Gentle 40° IntensivZone Express Wash/ Speed Perfect (VarioSpeed) Half load Extra drying Prerinse Clean 40° Intermediate rinse Final rinse 55° Drying mixed utensils and cutlery TurboSpeed 20 min. Extra drying Clean 50° -60° Final rinse 55° -65° all types of utensils cold rinsing, intermediate cleaning u / o Prerinse none Prerinse Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information for test institutes Test institutes receive the information for comparability tests (e.g. according to EN60436). These are the conditions for conducting the tests, however these are not the results or consumption values. Request by e-mail to: dishwasher@test-appliances.com The product number (E no.) and the production number (FD) are required which you can find on the rating plate 9: on the appliance door. TurboSpeed 20 min. – especially quick rinsing programme with one-off preheating* * depending on model The appliance is heated up once (approx. 25 min.), then the appliance is loaded and several quick rinse cycles (20 min. each) can run in succession. Note Detergent tablets are not suitable for this programme, as the detergent cannot completely dissolve within the short time. Therefore always use powder detergents and ensure that the salt and rinse aid dispensers are always filled and set to the correct value (see chapters entitled “Salt” and “Rinse aid”). Overview of programmes en Please read the operation carefully, the programme differs from the other programmes. 1. Open the door. 2. Switch on ON/OFF switch (. 3. Select programme TurboSpeed 20 min. • flashes on the digital display h (• = Heating phase). 4. Press START button `. 5. Close the door. The heating up phase of the empty appliance starts. The light spot on the floor is lit constantly. If the appliance is loaded before the heating phase, the duration of the heating phase is extended. 6. As soon as the light spot on the floor flashes, open the appliance. p flashes on the digital display h (p = Load). Attention! Interior is hot. 7. Load the appliance and start the rinsing phase by pressing the START button `. 8. When the rinse cycle has ended, the light spot on the floor flashes again and the buzzer is activated. 9. Open the door. ‹:‹‹ is indicated on the digital display h, remove the utensils. Shortly afterwards p flashes again on the digital display h. Attention! The utensils are hot and sensitive to shock! 10. If more rinse cycles are required, reload dishwasher, press the START button ` and close the door. 11. If no more rinse cycles are required, switch off ON/OFF switch ( and close the door. en Additional options 0 Additional options * depending on model Additional options can be set with the buttons X. Y Express Wash/ Speed Perfect/ (VarioSpeed) * This function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The change in the running time is indicated on the digital display h. To obtain optimum cleaning results at a reduced running time, water and energy consumption are increased. § Half load * If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load. · Hygiene * The temperature is increased during the cleaning process. This increases the hygiene status. This additional option is ideal for cleaning e.g. chopping boards and baby bottles. I Intensive zone * Perfect for a mixed load. You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increased slightly. . Extra drying * An increased temperature during the final rinse and an extended drying phase ensure that even plastic parts dry better. There is a slight increase in the energy consumption. 1 Operating the appliance Programme data The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value •:‹...

Este manual também é adequado para os modelos :
Máquinas de lavar louça - SN65N038IL/73 (3.31 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias