Assessments - 0, GPA: 0 ( )

Fabricante : Bosch Arquivo Tamanho: 3.54 mb Arquivo Nome : Língua de Ensino:

Dishwasher seems to run a long time 1. Incoming water is not warm enough. 2. Cycle time can vary due to soil and water conditions. 3. Rinse agent dispenser is empty. 4. Dishwasher connected to cold water supply. 5. The type of cycle options selected may add time to the cycle. Note: For typical cycle length refer to the wash cycles table in the Dishwasher Cycles and Options section. 1. Before starting a cycle, run hot water faucet at the sink nearest to the dishwasher. Incoming water should be at 120°F. 2. Sensors in the dishwasher automatically increase the cycle time to ensure a good wash when heavy soil is detected. 3. Add rinse agent. 4. Verify dishwasher is connected to hot water supply plumbing. Dishes aren’t getting clean enough 1. Spray arm movement is obstructed. 2. Spray arm nozzles clogged. 3. Improper use of detergents. 4. Filters could be clogged. 5. Dishes are nested or loaded too close together. 6. Selected wash cycle is not suitable for food soil condtions. 7. Make sure incoming water is at 120°F. 1. Ensure that spray arm movement is not blocked by hand rotating spray arms. 2. Remove the spray arms and clean according to “Check/Clean the Spray Arm Nozzles” in Care and Maintenance section of this manual. 3. Increase or decrease detergent depending on the water hardness. Refer to Table under “Adding Detergent and Rinse Agent”. 4. Clean the filter. Refer to “Check/Clean the Filter System” under Care and Maintenance section of this manual. 5. Rearrange load such that water spray can reach all items in the dishwasher. See also “Preparing and Loading” section of this manual. 6. Refer to “Wash Cycle” section in Operating the Dishwasher section of this manual. Dishes are not getting dry enough 1. Rinse agent dispenser is empty. (Rinse agent indicator is activated). 2. Improper loading of dishes. 3. Selected cycle does not include drying. 4. Dry Assist Note: Plastic or Teflon do not typically dry as completely as other items due to their inherent properties. 1. Add rinse agent. The use of rinse agent improves drying. 2. Rearrange load to ensure items are not nested. Refer also to the “Preparing and Loading” section of this manual. 3. Certain settings does not include drying cycle. 4. Activate Dry Assist as per instructions in Operating the Dishwasher section. Note: Select models offer an extra heating options to improve drying performance. Refer to “Wash Cycle options” under the Operating the Dishwasher section of this manual. Problem Cause Action Odor 1. Food debris is present at the bottom of the dishwasher. 2. Food particles are present near the door seal. 3. Residual water is present at the bottom of the dishwasher. 4. Drain hose is obstructed. 1. Remove the filters and clean according to the “Check/ Clean the Filter System” section of this manual. 2. Refer to “Clean the Door Gasket and Door Seal” in the Care and Maintenance section of this manual . 3. Ensure the unit has completely drained from the last cycle. Refer to the “Canceling o...

Baixe o seu

Para fazer o download, introduza 2 dígitos :