Log:
Assessments - 3, GPA: 4 ( )

Instruções de Operação Haier, Modelo DW12-HFE2ME

Fabricante : Haier
Arquivo Tamanho: 261.44 kb
Arquivo Nome : 8b3632ef-2779-4bbf-9a75-4f64aa921871.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


This appliance complies with the following EEC directives: -73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications; -89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications. -Carefully dispose of the packing material. -After removing the packing, check to make sure that the appliance is not damaged. If in doubt, contact a qualified professional. -The dishwasher must only be used by adults for the washing of household dishes and cooking utensils. -The appliance is not intended for use by young children or inform persons without supervision. -Young children should be supervised to ensure that they do not play with the appliance. -Keep detergents out of the reach of children. -This appliance cannot be installed outdoors, not even if the area in which it is installed is covered by a roof; It is also very dangerous to leave it exposed to the rain and elements. -Do not lean or sit on the door when it is open as this could overturn the dishwasher. -Do not touch the heating element during or after a wash cycle. Close-up View (Control Panel) -If the appliance malfunctions turn off water supply to the appliance and disconnect the plug from the wall socket. Refer to the section entitled, "Troubleshooting." If you cannot solve the problem, contact a authorised service centre. -Only specialised personnel are authorised to make repairs. -Appliances which are no longer being used must be made inoperable by cutting the power supply cord and removing the door lock. -If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. -After installation, the power plug must be accessible. -Rules to follow when using this appliance: * Never touch the dishwasher when barefoot or with wet hands; * We discourage the use of extension cords and multiple sockets; * During installation, the power supply cord must not be excessively or dangerously bent or flattened; * If the appliance is not operating properly, maintenance must be performed, disconnect the appliance from the power supply. Warning: Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle. To maintain the EFFICIENCY and SAFETY of this appliance,we recommend: -call only service centres authorised by the manufacturer. -always use original Spare Parts DW12-HFE2ME A ON-OFF Light F Low Salt Indicator Light B ON-OFF Button G Low Rinse Aid Indicator Light C Display Delay Time H Handle For Opening Door D Delay Select Button I Cycle Select Button E Half-load Button J Cycle Indicator Light .1. Close-up View (Interior) A Upper Rack F Washing Filter B Rack Height Adjustor G Turbo Dry-fan C Top Spray Arm H Detergent and Rinse Aid Dispenser D Lower Rack I Salt Container Cap E Bottom Spray Arm J Third Sprayer Specifications Width Depth Height 60 cm 60 cm 85 cm Capacity Mains Water Pressure 12 standard place settings 0.03-0.6MPa Power Voltage 220-240V~ Total Absorber Power 2150W .2. GB GB Salt .. Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water. Loading the Salt into the Softener Always use salt intended for use with dishwashers. The salt container is located beneath the lower rack and should be filled as follows: -Remove the lower rack and then unscrew and remove the cap from the salt container; -If you are filling the container for the first time, fill it with water; -Place the end of the funnel (supplied) into the hole and introduce about 2 kg of salt. It is normal for a small amount of water to come out of the salt container. -Carefully screw the cap back on. The salt container must be filled when the "low salt" indicator light (located on the control panel) comes on. To prevent the formation of rust, load the salt just before beginning a wash cycle. .3. Adjusting Salt Consumption The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used. This is intended to optimise and customise the level of salt consumption so that it remains at a minimum. Your local Water Board can supply the degree of hardness of the water in your area. To adjust salt consumption, proceed as follows: -Unscrew the cap from the salt container; -There is a ring on the container with an arrow on it (see figure), If necessary, rotate the ring in an anticlockwise direction from the "-" setting towards the "+" sign, based on the hardness of the water being used. It is recommended that adjustments be made in accordance with the following scheme: Water Hardness Clarke degrees dH mmol/l Selector position Salt consumpti...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias