Log:
Assessments - 3, GPA: 3.7 ( )

Instruções de Operação American Sensor, Modelo LP401A

Fabricante : American Sensor
Arquivo Tamanho: 314.55 kb
Arquivo Nome :
Língua de Ensino: enfr
Ir para baixar



Facilidade de uso


It is normal for this light to turn on once or twice after you power the detector or after a power failure. A G What should you do if the ALARM sounds? EVACUATE IMMEDIATELY! Do a head count to check that everybody is accounted for. Call the nearest fire department and ask them to determine the source of propane gas. Do not re-enter the premises until the problem has been corrected and the propane gas has been dispersed. ! WARNING: Activation of this device indicates the presence of propane gas, which is flammable and can be fatal. The source of the gas may be an object such as a furnace, a hot water heater or other propane gas appliances. This detector will only indicate the presence of propane gas near the detector. Propane gas may be present in other areas. Correction of the problem may require the services of a local propane gas utility company or contractor. H. What do you do after the problem has been corrected? On re-entering the premises after an alarm: I. Turn the 12 Volt supply off for ten seconds, and then turn it on again. 2. After ten minutes (during which the alarm may sound once or twice and the yellow light may flash), test the detector to make sure that the detector is working properly. I. Technical Information Your LP401, LP401 A, LP405, LP405A Propane Gas Detector uses a sensing technology that enables the detector to sound an alarm before concentration of gas reaches 25% of the Lower Explosive Limit (LEL). Exposure times The propane gas concentrations standard for the alarms has been set by the Underwriters Laboratories Inc. to be less than 25% of the LEL.Therefore your unit will alarm immediately, upon detection of dangerous levels. Specifications_ Power Supply Input Ratings Models LP401 and LP401A: 12V DC, 600mA Models LP405 and LP405A: 12 VAC, 600 mA Optional Relay Output Ratings Models LP401A and LP405A: class 2 output only _30 V DC 1 A Dimensions: 6.5" x 3.5" x 1.375" 16.5cm x 8.9cm x 3.5cm Normal Operating Conditions: Temperature: 4.4°C (40°F) to 37.8°C (100°F) Gas Detection Level: less than 25% LEL of propane gas Lights: Power (green) Alarm (red) Malfunction! yellow) negligence or fault. Some states do not allow the exclusion or limitation or incidental or consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from province to province. Dicon Global Inc. 20 Steelcase Road West, Unit 3 Markham, Ontario, Canada L3R 1 B2 J. Warranty Information Limited Warranty Dicon Global Inc. warrants its enclosed Propane Gas Detector sensor to be free from defects in material and workmanship under normal use and service for a period of five (5) years form date of purchase. Dicon Global Inc. warrants it's enclosed Propane Gas Detector other than the sensor to be free from defects in materials and workmanship under normal use and service for a period of one (1) year from date of purchase...

Este manual também é adequado para os modelos :
Alarme de incêndio - LP405A (314.55 kb)
Alarme de incêndio - LP401 (314.55 kb)
Alarme de incêndio - LP405 (314.55 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias