Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Minimize fire hazards around the home. Smoking in bed, cleaning with flammable liquids such as gasoline, leaving children home alone, and unsafe holiday decorations are some of the more common causes of household fire. 2. Install a fire warning system. The primary purpose of this system is to protect lives, not property, by giving the earliest possible warning of the danger. In the event of a fire, the alarm system generates a loud intermittent tone distinctly different than a burglar alarm. In homes with more than one sleeping area a smoke detector (indicated by an inverted “s” in a circle) should be provided to detect smoke in each area. 3. Plan and practice an escape plan. A fire alarm warning is wasted unless the family has planned for a quick evacuation. Because there is very little time between detection of a fire and the time it becomes deadly, it is important that every member of the family understand exactly what to do. Possible escape routes through open windows marked with arrows. Primary and alternate escape routes should be established. Since stairwells and hallways can be blocked during a fire, exiting through a bedroom window at night should be an essential part of the escape plan. If the sleeping area is above the ground floor, provide a means of safe descent outside the building if one does not already exist. All family members should plan to meet at a predetermined location away from the house (such as a neighbor’s), to verify that all are accounted for. In Case of Fire 1. The primary purpose of a fire warning system is to protect lives. In the event of a fire alarm, quickly leave the building and call the fire department from a neighbor’s or public telephone. 2. If it is determined the alarm was accidentally tripped, the bell should be silenced, the detectors reset, and your alarm company notified immediately of the situation. Introduction Introduction With custom programming, the keypad is tailored to meet your individual needs. The Command mode allows you to perform a variety of functions with maximum simplicity - only the touch of two or three keys is required to control almost every feature on the keypad. Three function keys allow common commands to be performed with the touch of just one key. The keypad puts the control of your security system right at your fingertips. Maintenance and Service The keypad requires very little maintenance; however, the system should be tested weekly to detect service needs early. A test schedule and maintenance program is arranged with your alarm company. If a change in operation is noticed during normal use or testing, call for service as soon as possible. Do not attempt to repair the control panel, arming stations, or detectors yourself. Call _________________________________________ Before Testing The security system is connected to this telephone number: The security control panel is connected to the phone jack located: AC Power Failure If your keypad indicates AC power has failed, and you have power in the remainder of your premises, there could be a problem with the electrical transformer or circuit breaker supplying power to your security control panel. First, check to be sure the transformer is securely plugged into the electrical outlet. If it appears to be damaged in any way, do not attempt to repair it. Call your security company for service. Transformer location: _________________________________________ If the transformer is plugged in, check the circuit breaker supplying power to the outlet. If the breaker is tripped, reset it. If it trips again, the overload condition must be corrected. Circuit breaker location: _______________________________________ The D720 Series Keypad The keypad is an illuminated digital arming station that is the keypad for your entire security system. The keypad does much more than just arm and disarm your security system; it can initiate several system commands. A system status display panel keeps you informed of security conditions, as well as storing alarm information for future reference. It also indicates various security system conditions such as your system’s armed status, protective point status, power supply status, and Command mode status. A built-in sounder alerts you of several different conditions, which requires action. The keypad also includes three function keys that perform many system commands with the touch of one key. Security System Basics What is a Point? Security System Basics What is a Point? Controlled Points Controlled points respond to alarm conditions depending upon whether the system is turned on (armed) or turned off (disarmed). Controlled points are programmed to respond instantly to alarm conditions or provide a delay for you to reach the keypad and disarm the system. There are two types of controlled points: Perimeter and Interior. 1. Perimeter Points: All exterior doors and windows of the building, forming the outside “wall of protection” around your building. 2. Interior Points: ...
Este manual também é adequado para os modelos :Alarme de incêndio - D720B (100.12 kb)
Alarme de incêndio - D720W (100.12 kb)