Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
Your PC must fulfill the following requirements: Hardware Description COM port Max. 4 (one COM port per panel) Interfaces USB/LPT Drives CD-ROM, 3.5" disk drive CPU min. 2 GHz RAM 1024 MB (server), 512 MB (client) Hard drive memory 10 GB Network card 100 Mbit Software Description Operating system Windows 2000 SP4, Windows 2003 server, Windows XP SP2 (not with Windows XP Home) Internet Explorer Version 5.5 SP1 or 6.0 MSDE Version MSDE 2000 SP3a Microsoft IIS Version 5.0 (Windows 2000, Windows XP) Version 6.0 (Windows 2003 server) Prepare detector check plan and floor plan Perform the following steps before installation: – Store the detector check plan for each panel on the computer. Detector check plans created with WinPara do not include system addresses. Those you have to add manually in the detector check plan. – Store all floor plans in .dwf format in one folder. FMS automatically sorts the floor plans alphabetically according to file names. Determine the sequence of the floor plans using letters. – a_reception.dwf = 1st element in FMS – b_office.dwf = 2nd element in FMS F.01U.032.785 | A3 | 2007.05 Installation Guide Bosch Security Systems Fire Monitoring System Preparation | en 11 Internet Explorer settings Before logging on to the server or client, you need to adapt certain settings in the Internet Explorer. To do this, perform the following steps: 1. Start Internet Explorer. 2. Select Tools -> Internet Options. 3. In the Security tab, select the Trusted sites item. 4. Click the Sites button. A new window opens. 5. Deactivate the Require server verification (https:) for all sites in this zone checkbox. 6. Enter the previously noted server name in the input field in name format (see Section Configuration) and click the OK button. 7. Click the Custom level button. 8. Activate all settings of the ActiveX controls under the menu item ActiveX controls and plug-ins. 9. Click the OK button. Bosch Security Systems Installation Guide F.01U.032.785 | A3 | 2007.05 12 en | Set up FMS Fire Monitoring System 2 Set up FMS Installation i NOTICE! Have the installation CD for the operating system ready. To ensure full operation of FMS, components must be post- installed (e.g. Internet Information Server -IIS). Follow these steps to install the FMS: 1. Insert the installation CD for the FMS. 2. Double-click the Setup.exe file if the installation program does not open automatically. The FMS installation program opens. ! CAUTION! Cancellation of installation. During the installation of the SQL server you are asked to reboot the computer which would cause an incomplete installation. Click the No button. 3. Follow the on-screen instructions. a. In each step, click the Next button to continue with the installation. b. Then click the Finish button to complete the installation of the FMS. During the installation of FMS, other installation programs for additional components will open automatically (e.g. WHIP). • Follow the on-screen instructions. a. In each step, click the Next button to continue with the installation. b. Then click the Finish button to complete the installation. F.01U.032.785 | A3 | 2007.05 Installation Guide Bosch Security Systems Fire Monitoring System Set up FMS | en 13 Connection FMS can be used with the following panels: – FPA-5000 (connection via OVS to the IOS 0020 A or FPE-5000-UGM) – UEZ 2000 LSN (connection via OVS to the SM 20) – BZ 500 LSN (connection via OVS to the SM 20) -- IOS 0020 A -+ AUX INOUTS1 RXDTXDGND FSM-2000 OVS 5 9 1 6 OPTO V 24 Figure 2.1 Connection with the panel FPA-5000 FSM-2000 OVS 5 9 1 6 OPTO V 24 SM20 SDO+SDO-SDI+SDI- Figure 2.2 Connection with the panel UEZ 2000 and BZ 500 OPTO (OVS) IOS 0020 A SM 20 / FPE-5000-UGM 5 RXSDI9 RX+ SDI+ 1 TX+ SDO6 TXSDO+ Bosch Security Systems Installation Guide F.01U.032.785 | A3 | 2007.05 14 en | Set up FMS Fire Monitoring System Configuration After installation, perform the following steps to configure your software: 1. Double-click the FMS Manager icon on your desktop. 2. Enter Administrator as the user name and password. 3. Click the OK button. The FMS Manager opens, allowing you to configure the system. 4. Click the button Execute - FMS Configuration Wizard in the System start/stop tab. The configuration program opens. 5. Click the Next button. A log-on screen opens. 6. Enter Administrator as the user name and password. 7. Click the OK button. The configuration program continues. 8. Insert the disk supplied. 9. Step 1/6: Select the dongle.crp file from the disk. 10. Click the Next button. 11. Step 2/6: Note the determined server name. 12. Click the Next button. 13. Step 3/6: Specify a COM port (maximum of four) for each panel in the drop-down menu. 14. Click the Next button. 15. Step 4/6: Click the button and select the corresponding detector check plan .mpp for each COM port. 16. Click the Next button. 17. Step 5/6: Click the button and enter the path of the folder containing the floor plans. 18. Click the Next button. 19. Ste...