Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
Note r Default: 1-Sided ® 2-Sided 11. Auto Reset The machine returns to its initial condition automatically after your job is finished. The time can be set from 10 to 180 seconds. Note r Default: 60 seconds 12. Density Pattern You can customize the seven image density levels to make them darker or lighter. 1. General Features 4/4 Menu Description 13. Initial Mode Set You can select the standard mode or program No.10 as the mode to be set when modes are cleared, the machine is reset, or immediately after the operation switch is turned on. Note r Default: Initial 14. Management Setting You can change settings for user access limitation for copier functions. Counter Reset You can check the number of copies made under each user code. You can also reset each user code's counter to 0. Note r If more than one user code is registered, you can view all the counters using the [Prev.] or [.Next] key. Clear Code/Counter You can delete all user codes or reset all counters to 0. 148 Settings you can Change with the User Tools Menu Description Reg. User Code You can register user codes. Note r Up to 50 user codes (8 digits or less) can be registered. Chg/Del User Code You can change or delete user codes. Note r The number of copies made under the old code is added to that made under the new user code. r The number of copies made under the deleted code is also deleted. Counter List Print You can print a list of counters shown by user code. Note r To stop the printing, press the [Cancel] key. 2. Adjust Image 1/2 Menu Description 1. Erase Border The default setting of the width of the erased margins in the Erase Border mode can be changed as follows: • Metric version: 3 – 50mm in 1mm steps • Inch version: 0.1 – 2.0" in 0.1" steps Note r Default: • Metric version: 10mm • Inch version: 0.4" 2. Erase Center The default setting of the width of the erased margins in the Erase Center mode can be changed as follows: • Metric version: 3 – 50mm in 1mm steps • Inch version: 0.1 – 2.0" in 0.1" steps Note r Default: • Metric version: 10mm • Inch version: 0.4" 149 User Tools (Copy Features) Menu Description 3. Marg. Adj. Front You can adjust the margin width on the front side of copies in Margin Adjust mode. You can change this setting as follows: • Metric version: 0 – 30mm in 1mm steps • Inch version: 0 – 1.0" in 0.1" steps Note r Default: • Metric version: 5mm • Inch version: 0.2" 4. Margin Adjust Back You can specify a binding margin on the back side of copies for the following modes: 1-Sided ® 2-Sided, Book ® 2-Sided, and 2-Sided ® 2-sided. You can change this setting as follows: • Metric version: 0 – 30mm in 1mm steps • Inch version: 0 – 1.0" in 0.1" steps Note r Default: • Metric version: 5mm • Inch version: 0.2" 150 Settings you can Change with the User Tools 2. Adjust Image 2/2 Menu Description 5. Double Copy You can select a separation line in Double Copy mode from no line, Solid line, Broken line, or Crop marks. •None •Solid • Broken Line •Crop Marks Note r Default: None (no line) 151 User Tools (Copy Features) Menu Description 6. Combine Copy You can select a separation line in Combine mode from no line, Solid line, Broken line 1, Broken line 2, or Crop marks. •None •Solid • Broken Line 1 • Broken Line 2 •Crop Marks Note r Default: None (no line) 152 Settings you can Change with the User Tools Menu Description 7. Image Repeat You can select a separation line in Image Repeat mode from no line, Solid line, Broken line 1, Broken line 2, or Crop marks. •None •Solid • Broken Line 1 • Broken Line 2 •Crop Marks Note r Default: None (no line) 8. Booklet:Original You can select type of originals for “16 pages ® booklet”. See . P.78 “Series/Booklet Copies—Making One-Sided Copies from Various Originals And making Various Copies from a Bound Original”. Note r Default: Portrait r If you select “Portrait”, the page direction of booklet will be forwarding. If you select “Landscape”, the page direction will be backward. 153 User Tools (Copy Features) 3. Input/Output 1/2 Menu Description 1. Duplex Auto Eject When making two-sided copies from one-sided originals, if the last original is an odd page, the last copy will be automatically delivered with the reverse side blank. You can cancel this setting. . P.85 “Duplex—Making Two-Sided Copies” Note r When you set one original at a time in the document feeder or set an original on the exposure glass, this function does not come effect. r Default: Yes 2. Comb. Auto Eject As a default setting, even if the number of originals in the optional document feeder is less than the number required in the selected Combine mode, the lacking number of copies are automatically made in blank. You can cancel this setting. . P.74 “Combine—Combining Originals into One Copy” Limitation r When you set one original at a time in the document feeder or set an original on the exposure glass, this function does not come effect. Note r Default: Yes 3. Original Count As a default setting, the display shows the copy quantity ...
Este manual também é adequado para os modelos :Impressoras - 450e (3.57 mb)