Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
27 Step 3 To print, open a document and select File > Print from the menu. Step 4 Select Edit Printer List from the Printer dialog box. Step 5 Click Add Printer and then select the desired printing protocol (AppleTalk or LPR Printers using IP). 28 AppleTalk: After selecting AppleTalk, the Port Name of the Print Server will be displayed. Select the Port to which the PostScript printer is connected. Then, select the printer model from the dialog box. Click Add Printer to complete the Printer Port configuration. Select the Printer Port just configured in the Print window. Click Print to print your document. LPR Printers using IP: When you select LPR Printers using IP Protocol, type the IP Address of the Print Server into the LPR Printer’s Address field. In the Queue Name field, type in the Print Server’s port name that the PostScript printer is connected to. Select the printer model from the dialog box, and select the printer model from the pull- down menu. Click Add to complete the process. Close all Print Center windows and select the Printer Port that was just selected. Then, click Print to print the document. 29 For Mac OS 9 If you use Mac OS 9, you can use the AppleTalk network protocol using the EtherTalk transport or a proprietary low-speed LocalTalk transport. Your Print Server can be used for network printing to PostScript printers. You can print from any Mac OS computer connected to your Ethernet network either directly using an EtherTalk connection or indirectly through a LocalTalk-to-EtherTalk router. To set up the Print Server for AppleTalk printing: Step 1 Please confirm that the AppleTalk protocol is enabled in your Macintosh computer. Step 2 Change the IP Address on one of the computers within your network to 192.168.1.x (where x is any number between 2 - 200). Step 3 Type the Print Server’s IP address into the address field of your web browser. (Default IP Address is 192.168.1.254). Step 4 Click on Configuration and go to the AppleTalk Protocol page. If your AppleTalk network is divided into AppleTalk zones, you have to specify which zone the Print Server should be in. You should locate the Print Server in the same zone as most of the users who will be using it. If your network is not divided into zones, it should contain a single asterisk “*”. 30 To print from Mac OS Client Workstations: Note: The actual settings of selecting a PostScript printer connected to your Print Server may be different from the instructions provided below depending on the devices and the software you are using. Step 1 Select Chooser from the Apple menu to choose a printer connected to the Print Server. Step 2 In the left column of the Chooser window, select the desired printer. Please confirm that AppleTalk is set to Active. A list of all networked PostScript printers will be displayed within the right column. Step 3 Double-click the name of the Printer Port you wish to use. 31 Step 4 If you have not previously set this printer as the default printer, your computer will prompt you for a PostScript Printer Description file. Choose Select PPD. Step 5 Select the appropriate printer description file for your printer. Click Open. (If your printer is not listed, click Generic to use a generic printer description). The selected printer will become your computer’s default printer. You may need to choose Page Setup in any application you have opened. 32 11. Product Specifications Printer Connection Printer Interface: One USB Port (Ver. 1.1), Two 25-pin Parallel Ports Network Connection Network Interface: RJ-45 connector for 10Base-T or 100Base-TX shielded Network Standards: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Fast Ethernet Network Data Transfer Rate: 10/100 Mbps Network Protocols Ethernet Frame Types: 802.2, 802.3, Ethernet II, SNAP (auto-switching) Transport Protocols: TCP/IP, NetBEUI, AppleTalk TCP/IP Protocols Supported: BOOTP, SNMP, Telnet, TFTP, FTP, LPD, RARP, DHCP Management and Diagnostics Standard: SNMP MIBs: MIB-II (RFC 1213) Diagnostic LED Indicators: Power, Link/Act, USB, LPT1, LPT2 Environmental and Physical Power Supply: External power supply providing 5VDC input Dimensions: 193 mm x 117 mm x 34 mm Weight: Appx. 300 g Operating Temperature: 0 degree C to 50 degree C (32 to 122 F) Storage Temperature: -25 degree C to 55 degree C (-13 to 131 F) Humidity: 5% to 95%, non-condensing Emissions: FCC Class B, CE Class B 33 12. Appendix Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Web site: Copyright © 2004 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101. All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and foreign patents and pending applications, mask work...