Assessments - 6, GPA: 4.3
(
)
)
|
Facilidade de uso
WARNING Negligence of the precautions indicated by this symbol may result in death or serious injuries. CAUTION Negligence of the precautions indicated by this symbol may result in injuries or damages to property. This is a symbol mark used to alert your attention to important items. This is a symbol mark used to indicate useful information, such as procedures, instruction or the like. i — vi — WARNING l l Never handle the iDP3240 Printer in the manners descried below; otherwise, it may be damaged, get out of order or overheated, possibly causing smoke, fire or electric shock. If the printer is damaged or breaks down, be sure to turn off the power, disconnect the power plug from the wall outlet, and contact your CBM dealer. • Do not allow the printer to be subjected to any strong impact or shock, such as stamping, hitting, dropping, and the like. • Install the printer in a well-ventilated place. Do not use the printer in such a manner that its ventilation slots are blocked. • Do not install the printer in a place like a laboratory where chemical reactions are expected, or in a place where saltish gases are present in the atmosphere. • Use the printer only on the specified voltage and frequency. • Do not connect/disconnect the power cord or data cable by holding the cable. • Do not pull or carry the printer in such a manner that undesirable force is applied to the cables. • Do not drop or insert any foreign substances, such as paper clips or pins, into the printer. • Do not spill any liquid on or spray any chemical-containing liquid over the printer. If any liquid is spilled on the printer, turn it off, disconnect the power cord from the wall outlet, and contact your CBM dealer. • Do not connect the printer to an electrical outlet shared by other devices. • Do not disassemble or modify the printer in any manner; otherwise, a fire or electric shock may result. • Should water enter the equipment by any chance, unplug it and contact your CBM dealer. Using it in that condition may result in fire or electric shock. • Do not damage, break, alter, twist excessively, pull, or bundle the power cord. Avoid placing heavy objects on, or heating the power cord, as this may lead to damages to the power supply which may cause a fire, an electric shock, or a malfunction. Contact your CBM dealer if the power cord is damaged. • Do not overload a single electrical outlet by using a table tap or a current tap socket from it. This may result in fire or electric shock. The plastic bag the printer came in must be disposed of properly or kept away from children. Wearing it over the head may lead to suffocation. — vii — PRECAUTIONS FOR INSTALLATION • Do not use or store the iDP3240 Printer in a place exposed to heat of fire, moisture or direct sunlight, or in a place where the prescribed operating temperature and humidity are not met, or in a place exposed to oily mist, iron powder or dust; otherwise, the printer may get out of order, emit smoke or catch fire. • Do not install the printer in a place like a laboratory where chemical reactions are expected, or in a place where saltish gases are present in the atmosphere; otherwise, there may occur a danger of fire or electric shock. • Install the printer on a horizontal, sturdy table in a place provided with proper ventilation and free from any vibration. (Be careful not to block the ventilation slots of the printer.) • Do not put any object on the printer, or this may cause a trouble. • Do not use the printer near a radio or television receiver. Avoid sharing an electrical outlet with a radio or television receiver, or this may cause a reception problem. • Use the printer only on the specified voltage and frequency; otherwise it may emit smoke, catch fire or cause other problems. • Confirm that the wall outlet used for printer connection has sufficient electrical capacity. • Avoid sharing a single electrical outlet with other devices; otherwise, the electrical capacity may be exceeded, causing the outlet to overheat or the power supply to be shut down. Also, do not stamp or put any object on the cables. • Never connect the grounding cable to a gas pipe, or this may lead to a danger of explosion. Before connecting or disconnecting the grounding cable, be sure to disconnect the power plug from the wall outlet. • Be sure to turn off the power of the printer and the host computer connected before connecting or disconnecting the cables; always hold both plug and cable. Do not pull or carry the printer in such a manner that an undesirable load is applied to the cables. • Connect the connector cables correctly and securely. Especially, if a connection is made with the polarity reversed, internal elements inside the printer may be damaged or the host computer connected may be adversely affected. • Use shielding wires or twist paired wires for signal lines in order to minimize the effects from noise. Avoid connecting to a device that is likely to generate much noise. • When a drawer Kick-Out ...