Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Loosen the two thumbscrews (turn counter-clockwise) at the rear of the printer (Figure 1 and Figure 2), and then carefully slide the formatter board out of the printer (Figure 3). Figure 1 ■g Ф I Figure 2 Carefully slide the' formatter board out of the printer. Figure 3 2. Set the formatter board on a clean flat surface (Figure 4). Insert the font card into card slot #2 (center card slot) as shown (Figure 5). The font card cannot be used in card slot #1. Do not remove or change the slot positions of any existing cards. Ensure the font card is fully inserted and seated against the connector. Figure 4 Figure 5 Document #50-70409-001 Rev. A Page 4 of 5 TROY Font Card Installation Guide 3. Align the top and bottom edges of the formatter board with the top and bottom track guides inside the printer (Figure 6 and Figure 7), and then carefully slide the formatter board into the printer. Hand-tighten the two thumbscrews (turn clockwise) to secure the formatter board. Figure 6 Figure 7 4. Reconnect the printer data cable and power cable. The font card installation is complete. 5. Refer to the TROY Quick-Start Guide (provided with your TROY Font Card Solution) for instructions on installing the required TROY software and support files. NOTE: If assistance is required for installing the font card, please call TROY Technical Support at (800) 332-6427. Customers outside the United States, please call (304) 232-0899. Document #50-70409-001 Rev. A Page 5 of 5...
Este manual também é adequado para os modelos :Impressoras - HP 9050 (1.66 mb)
Impressoras - HP 4250 / 4350 (1.66 mb)