Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
See “1 ® 2 Duplex Auto Margin Adjust” . P.320 “Adjust Image”. A Press the [Edit Image] key. 131 Copying B Press the [Margin Adj.] key. 2 C Set a front margin for a front page. Press the [®] and [¬] keys when setting the left and right margins, and the [.] and [] keys when setting the top and bottom margins. Note r You can adjust the width in the range of 0–30mm, 0"–1.2". D Set a back margin the back page. Press the [®] and [¬] keys when setting the left and right margins, and the [.] and [] keys when setting the top and bottom margins. Note . You can specify the back margin only when the Duplex or the Two Sided copy with Combine is selected. r If you do not set a back margin, go to step E. E Set your originals then press the {Start} key. 132 Border Erase Border Erase Limitation r This function will not take effect if the size of the original cannot be detected. Note r You can change the width of the erased margin as follows: Metric version 3 – 50 mm (in 1 mm steps) Inch version 0.1" – 2.0" (in 0.1" steps) Note . The default width of the erased margin is as follows. You can change this settings with the User Tools. See “Border Erase Width” . P.320 “Adjust Image”. Metric version 10 mm Inch version 0.4" . The width of the erased margin varies depending on the reproduction ratio. . If the size of the original is different from sizes listed in the following chart, the erased margin might be shifted. . Metric version Where Original Is Set Paper Size and Orientation Exposure glass A3L, A4KL, 81/2" . 13"L*1 Document feeder A3L, B4L, A4KL, B5KL, A5KL, B6KL, 11" . 17"L, 11" . 15"L, 82/1" . 11"KL, 81/2" . 13"L*1 *1 You can select from 81/2" . 13", 81/4" . 13" and 8 " . 13" with the User Tools (System Settings). See “Original: F/F4 Size Setting” in the System Settings manual. 133 Copying . Inch version Where Original Is Set Paper Size and Orientation Exposure glass 11" . 17"L, 81/2" . 14"L, 81/2" . 11"KL Document feeder A4KL, 11" . 17"L, 11" . 15"L, 81/2" . 14"L, 81/2" . 11"KL, 51/2" . 81/2"KL, 81/2" . 13"L*1 1 2 2 *1 You can select from 81/2" . 13", 81/4" . 13" and 8 " . 13" with the User Tools (System Settings). See “Original: F/F4 Size Setting” in the System Settings manual. . The position of the margin to be erased is determined according to the original size and reproduction ratio. LCopy paper KCopy paper 1 1 A Press the [Edit Image] key. B Press the [Border Erase] key. 134 Border Erase To select “Same Width” A Press the [Same Width] key. B Adjust the width of the margin to be erased by pressing the [+] or [-] key. Note . To change the width entered, press the [+] and [-] keys and enter the correct width. To Select “4 Sides” A Press the [4 Sides] key. B Adjust the width of the margin to be erased by pressing the [+] or [-] key. Note . To change the width entered, press the [+] and [-] keys and enter the correct width. C Set your originals then press the {Start} key. 135 Copying Center/Border Erase This function erases the center and/or all four sides of the original image. This is useful for avoiding shadows on the copy image caused by the binding or splayed pages of books etc. 2 Two modes of this feature are available: v Center This mode erases the Center margin of the original image. v Border This mode erases the edges area of the original image. Limitation r This function will not take effect if the size of the original cannot be detected. Note r You can change the width of the erased margin as follows: Metric version 3 – 50 mm (in 1 mm steps) Inch version 0.1" – 2.0" (in 0.1" steps) . The default width of the erased margin is as follows. You can change this settings with the User Tools. See “Border Erase Width” . P.320 “Adjust Image” and “Centre Erase Width” . P.320 “Adjust Image”. Metric version 10 mm Inch version 0.4" . The width of the erased margin varies depending on the reproduction ratio. . If the size of the original is different from sizes listed in the following chart, the erased margin might be shifted. 136 Center/Border Erase . Metric version Where Original Is Set Paper Size and Orientation Exposure glass A3L, B4L, A4KL, 81/2 " . 13" L*1 Document feeder A3L, A4KL, A5KL, 11" . 17"L, 82/1 " . 11"KL, 81/2 " . 13" L*1 *1 2 You can select from 81/2" . 13", 81/4" . 13" and 8" . 13" with the User Tools (System Settings). See “Original: F/F4 Size Setting” in the System Settings manual. . Inch version Where Original Is Set Paper Size and Orientation Exposure glass 11" . 17"L, 81/2 " . 14"L, 81/2 " . 11"KL Document feeder A4KL, 11" . 17"L, 11" . 15"L, 81/2 " . 14"L, 81/2 " . 11"KL, 51/2 " . 81/2 "KL, 81/2 " . 13" L*1 *1 You can select from 81/2" . 13", 81/4" . 13" and 8" . 13" with the User Tools (System Settings). See “Original: F/F4 Size Setting” in the System Settings manual. . The position of the margin to be erased is determined according to the original size and reproduction ratio. L Copy Paper K Copy Paper 1 1 3~50mm . 1: Erased part . You can use the Erase Center and Erase Border functions together...
Este manual também é adequado para os modelos :Impressoras - 1050 (4.99 mb)