Assessments - 2, GPA: 5 ( )

Fabricante : Konica Minolta Arquivo Tamanho: 616.41 kb Arquivo Nome : Língua de Ensino:

Depending on which machine you have, this will either be 8 x 0’s (00000000) or 12345678. 3) Click on the Network tab at the top of the screen 4) Then click on LDAP 5) Once you have input the settings, be sure to click on ‘Check LDAP Setting’ Bizhub 250/350 Setting up via the Web Browser- It is easier to configure the Bizhub 250/350 via the web interface. 1) Log into Admin Mode using the code of 8 x 0’s (00000000) and click on the Network tab. Make sure you enable LDAP under the ‘LDAP’ heading before you go into ‘LDAP Server Setting’ 2) Select any available set of 3 dashes(allowed up to 5 servers) we will assume Hot2003 does not exist 3) The LDAP Server screen opens as below, you may need to force the domain as shown. Search base will be your FQDN in dc=, format. Domain Name would be your normal domain logon name. Forcing the Domain Bizhub C203 – 650 (Bizhub 361-501 is similar) Setting up via the Control Panel – At Machine: 1. Press Utility/Counter 2. Press “Administrator Settings” 3. Enter the Administrator Password, default = 12345678 and press “OK” 4. Press “Fax Settings” 5. Press “Function Settings” 6. Press “Forward TX Setting” 7. Press all as arrowed then “Select from Address Book” 8. Here you have a couple of options, you can select “Index” and search for a recipient or select “Destination Type” and “E-Mail” then select the recipient. The latter is shown below 8. Press “OK” you will then be returned to the screen as in 7 only this time you will see your selected recipient in the Forward Dest. Dialogue box. 9. Press “OK” then “Close” until back to main screen Setting up via the Web Interface 1. Enter the IP address of the Konica Minolta machine into Internet Explorer and press Go 2. Log into the web page using the Admin code for the machine. Default = 12345678. 3. Click on the Network tab at the top of the screen 4. Then click on LDAP Setting and set to Enable 4) Select “Setting Up LDAP” and select any available radio button. we will assume Hot2003 does not exist. 5. Select “Edit” 6. Enter you network settings in the dialogue box’s including password. The copier will use the Admin credentials to interrogate LDAP (none of this is seen by end user) 6. Select “OK” you will then be returned to the screen as in 5-6 above, where you can ‘Test’ the connection. If all OK you can Logout. To use the LDAP search function the procedure will vary slightly depending on the machine model. For this example we will use the Bizhub C550. For File Type selection please refer to the relevant User Manual User Mode: 1. Place Document(s) in document feeder 2. Select “FAX/SCAN” 3. Select Address Search Tab 4. Select “Search” 5. Enter firstname or lastname or part thereof 6. Select “Start Search” 7. Machine will retrieve names from the LDAP server matching search criteria 8. Select Recipient(s) - *Select “Name-Dest” then name*Only if Fax Unit Fitted 9. Select “OK” 10. Press “Start” Setting up and Printing using User Authentication on Bizhub’s C203-C650 Machine used f...

Baixe o seu

Para fazer o download, introduza 2 dígitos :