(Page page 3.7) • Home: Allows user to arrange each function in the display screen. Note: Depending on the optional kit you installed or the category you selected, the selectable options on the display screen may differ. Measurements This option lets you change the measurement unit to use (mm or inch), and set the numeric separation (comma or period). Timers The machine cancels a printing job if data does not be received in specific time. • System Timeout: The machine returns to the default value after certain time the machine waits. You can set a time for maximum 10 minutes. • Held Job Timeout: The machine holds a job for a specific time period. You can set a time period for at least an hour. 10.2 Option Description Language It allows you to change the language that appears on the touch screen. Power Saver You can reduce energy consumption by setting these features. Power Saver has two options, first Low Power Save turns off the scanner lamp under the glass. Power Save turns off the fans within the machine except a core fan for the fuser unit. (Page 3.6) Tray Management This feature allows you to select the tray and paper you use for a printing job. Paper size, paper type, and paper color options are adjusted here. Tray Confirmation Message is to activate the window asking whether you set the paper size and type for the just opened tray. • Auto Tray Switch: If tray1 and tray2 are filled with letter size paper, when tray1 is empty and this option is On, then the machine continues printing with paper in tray2. • Auto Continue: When the paper is mismatched, meaning that tray1has filled with the letter size paper, but the printing job needs A4 size paper, the machine will wait for 30 seconds to paper in tray1 with proper sized paper. After 30 seconds, the machine automatically starts printing with Letter sized paper. • Paper Substitution: When the paper is mismatched, this option sets the machine print A4 size paper in the Letter size paper or vice versa. • Wide A4: It is useful when printing in DOS mode. This option prints 80 charactors in a line, which printing 78 charactors in a line is usual in DOS mode. Altitude Print quality is affected by atmospheric Adjustment pressure, which atmospheric pressure is determined by the height of the machine above sea level. This feature lets you adjust the altitude in a height district. Higher altitude location need to set this feature to High 3, which affects print quality. Output Options Output Options is for, when the staples run out, you to let the machine stop processing and wait to refill the staples or continue the job. If you set Within Job Offsetting to On, the output paper is placed and sorted by job unit. You can also select stapling position for landscape printing with Landscape Stapling Postion. Option Description Contention This feature lets you to select the priority Management between copy jobs and print jobs. • Priority: Set the priority by numbering the job. The machine starts from the least to the highest number in order. • First In, First Out: The machine does an asked job in order. Sound You can adjust the loudness of the machine sound. Press Fault to adjust the machine's error sound. Select Conflict if you pressed the wrong option. Press Selection to sound whenever you press the selection from your touch screen. Supplies The machine gives you the notification of the Management drum and toner to reorder, and resets the used fuser counter, bias transfer roller, feed roller and document feeder friction pad counter. Machine Test The machine prints the test image patterns using Image Quality Test Patterns. On Demand You can set the machine to delete previous job Overwrite information on HDD as you store new job information. To activate this feature, go to Admin Setting > the Setup tab > Optional Service and set the On Demand Image Overwrite option to Enable. After activating this feature you can overwrite a HDD by pressing Start in the display. HDD Spoolling To spool documents in HDD for the network printing, select On. Stored Job File You can choose the file policy for generating file Policy name before you proceed with the job through HDD. If the HDD memory already has the same name when you entered a new file name, you can rename or overwrite it. • Rename: If the HDD already has the same file name when you entered a new file name, the file will be saved as a different file name that is automatically programmed. • Overwrite: If the HDD already has the same file name when you entered a new file name, the previous file will be recorded over with the new file. Country You can change the country, then some of the values for fax and paper size will be changed automatically for your country. After installing the fax kit, you must change the country. Home Window Background You can change the touch screen’s background image. 10.3 Copy Setup Option Description Multi-Bin You can choose the o...
)
