Press [ ] or [ ] to select the line type that you are using and press [OK]. : Pulse dialing : Tone dialing (Default) Press [ ] (Menu) to close the menu screen. 18 Select from the following three methods, depending on your environment and devices. Connecting via a LAN Cable Connecting to LAN P.19 Connect them using a LAN cable. You need this Router or hub LAN cable • Windows Installing the USB connection P.22 • Macintosh Installing the software P.25 Connecting via a USB Cable Connect them using a USB cable. USB cable You need this Use the same procedure for both Window and Macintosh. * Check to make sure that there is a free port for connecting the machine or the computer you use to the router or hub. * Use a Category 5 or higher twisted pair cable for the LAN. Selecting the method for connecting to the machine Preface 1 Installing the Machine 2 Configuring and Connecting the Fax 3 Connecting to a Computer andInstalling the Drivers 4 Appendix Preface 1 Installing the Machine 2 Configuring and Connecting the Fax 3 Connecting to a Computer andInstalling the Drivers 4 Appendix Connecting to LAN Check to make sure that the computer is connected by a LAN cable to a router or hub, and that the network setup is completed. If it is not set up, you will not be able to use the machine on the wired LAN network even if you perform the following steps. • The structure of your computer or networked device, the existence of router functions, setting methods and security settings vary depending on your environment. For more information, see the instruction manual provided with the network device you are using, or contact the manufacturer. • If using the machine in your office, consult with your network administrator. Before adding the machine to a wired LAN Connection procedure • The structure of your computer or networked device, the existence of router functions, setting methods and security settings vary depending on your environment. • If using the machine in your office, consult with your network administrator. Internet Router or hub LAN cable Precautions when connecting to a wired LAN About the LAN cable • The machine does not come with a LAN cable or a hub. Have cables or a hub ready as needed. • Use a Category 5 or higher twisted pair cable for the LAN. 2. The machine sets the IP address automatically. Wait approximately 2 minutes. If you want to set the IP address manually, see the following. e-Manual "Setting IPv4 Address" e-Manual "Setting IPv6 Address" If the IP address of the machine is changed When the machine and computer are on the same subnet, the connection is maintained. Installing via Network Connection • For Windows Installing via Network Connection P. 20 • For Macintosh Installing the Software P. 25 About obtaining the IP address automatically (AutoIP) or is enabled in the default setting. Even if you do not set the IP address manually, this machine can obtain it automatically. • Even if you do not have a dedicated device such as a DHCP server, the IP address is obtained automatically. • The setting is prioritized over . If a fixed IP address is set as the IP address of the computer, set the fixed IP address also for this machine manually. 1. Connect the LAN cable. (For Windows) 2. Turn on the computer, and then log on as a user with administrative privileges. 3. Install the MF Drivers and MF Toolbox. If you have already logged on, exit all applications which are running. * If you are operating in the IPv6 environment, you may not install the drivers or software following the procedures below. Refer to “Installing the MF Drivers Via the WSD Network” in the e-Manual to install MF Drivers. * You may not use the scan function in the IPv6 environment. Insert the CD-ROM. Click. Click. Read the contents of the License Agreement. Click. If the top screen does not appear • Windows 2000, XP, and Server 2003 1. From the [Start] menu, select [Run]. 2. Enter "D:\Minst.exe", and then click [OK]. • Windows Vista, 7, and Server 2008 1. Enter "D:\Minst.exe" in [Search programs and files] or [Start Search] under the [Start] menu. 2. Press the [ENTER] key on the keyboard. * The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name may differ depending on the computer you are using. Click. If the following dialog box appears 1. Check the following points. • The computer and machine are connected via the network. • The power of the machine is turned ON. • IP address is properly set up. Proceed to P.A-3 “Checking the IP Address” [Easy Installation] performs the installation of the following software. • Printer driver • Fax driver (D1370/D1350 only) • Scanner driver • MF Toolbox To add the following software and manual to the installation, select [Custom Installation]. • Presto! PageManager • e-Manual e-Manual "Installing the MF Drivers and MF Toolbox" Click. Click. 20 Preface 1 Installing the Machine 2 Configuring and Connecting the Fax 3 Connecting to a ...
)
