Assessments - 3, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
The printhead will rest at a slight angle. Do not press it down. 4 Remove the printhead from its package. Turn the printhead over, then remove the orange protective cap. 2 NOTE: Do not touch the electrical contacts. 5 Lower the lock lever and gently press it down until it locks into place. Press the POWER button. Raise the gray lock lever. 1 Shipping Tape POWER Light POWER Button Protective tape Serial number Plug the power cord into the back of the printer and connect the other end to a power outlet. 2 3 Open the front cover. The printhead holder automatically moves to the center. Remove the protective orange tape. Write down the serial number located to the right of the printhead. You will need this later to register the product. 5 4 Ink Tanks BCI-3eC Cyan BCI-3eM Magenta BCI-3eBK Black BCI-3eY Yellow Remove the orange shipping tape from the front and sides of the printer. 1 Carefully remove all items from the box. Power Cord S500 Series Color Bubble Jet Printer Documentation and Software Kit S500 BJ (Bubble Jet) Printhead Paper Rest Output Tray Install the Printer 6 Driver (Macintosh®) Macintosh Install the Printer Driver (Macintosh®)6 Macintosh Click Start. (If the Printer Driver button is not red, select Printer Driver, then click Start.) The printer driver will start loading automatically. When the Printer Port window appears, turn the printer on so the printer port (connection) can be automatically detected. The software will begin identifying the printer port being used. IMPORTANT: If your computer cannot detect a printer port, refer to the Troubleshooting chapter in the S500 Quick Start Guide for instructions. When the Terminate Installation window appears, click OK. If you are prompted to restart the computer, click Yes. When the installation and registration process has completed, click Exit. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead. Continue with step 7 Align the Printhead. 5 7 8 6 9 10 Be sure the printer is off before continuing. NOTE: For Windows 2000 or Windows NT 4.0, log on to Windows as an Administrator before continuing. IMPORTANT: If you see this screen, click Cancel and continue. Close any open software applications, then insert the S500 Setup Software & User's Guide CD-ROM. The setup program should run automatically. NOTE: If the setup program does not run, click Start, then Run, then type x:\msetup.exe, where x is your CD-ROM drive. Read the Welcome screen, then click Next. Read the License Agreement, then click Yes. When the main menu appears, click Install Software. NOTE: If you are prompted to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, insert the CD-ROM and continue. 1 2 3 4 POWER Light POWER Button Windows Install the Printer Driver (Windows®)6 Place a sheet of blank paper in the paper rest. Start the alignment procedure. Windows: a. Click Start, then Settings, then Printers. b. Right-click the Canon S500 icon, then click Properties. c. Click the Maintenance tab, then click the Print Head Alignment icon. d. When asked to start printhead alignment, click OK. e. Follow the on-screen instructions to complete printhead alignment. Macintosh: a. From the File menu in a software application, click Page Setup. b. Click the Utilities button. c. Click the down-arrow to select Test Print. d. Click the Print Head Alignment icon. e. Follow the on-screen instructions to complete printhead alignment. Click OK (Windows) or Close (Macintosh) when finished. NOTE: You can now install the BJ Solution software. Insert the BJ Solution CD-ROM. The setup program should start automatically. Follow the on-screen instructions. Part no. QA7-1656 © 2001 Canon U.S.A. Inc. Canon, BJ, BCI and Bubble Jet are trademarks of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. Printed in Thailand 1 2 Before using the printer, align the printhead to ensure the best quality printing. 3 Align the Printhead 7 1 2 Insert the S500 Setup Software & User's Guide CD-ROM. Open the printer driver folder on the CD-ROM, then double-click the Installer icon. 7 After the computer restarts, select the Apple menu, then Chooser. 8 Click the S500 icon in the Chooser. The printer name will highlight and move to the right panel. 3 4 Read the License Agreement, then click Accept. Click Install. The printer driver will load automatically. NOTE: To use the BJ Print Monitor, click the Backgrounding button to the On position. Close the Chooser. 9 10 Continue with step 7 Align the Printhead. If the message "No other applications can be running..." displays, click Continue. 5 6 When the installation and registration process has completed, TURN ON THE PRINTER, then click Restart. NOTE: Remember to register your product to ensure product support. The serial numb...